The buyer would like to receive quotations for -
Product Name: Low Fin Tube
Specifications:
1) STEEL PIPE 1.5415 16Mo3 OD 22 X WT 1.5 ASTM A335 L = 3 m
2) LOW-FIN TUBE 1.4510 X3CrTi17 OD 19.05 / ID 14.33 X 1.65 AISI 439 L = 3 m. More precise measurements belowb*.
3) STEEL PIPE 1.7380 10CrMo9-10 OD 16 (ID 13) X WT 1.5 ASTM A335 L = 3 m
4) STEEL PIPE 1.4541 X6CrNiTi 18–10 OD 20 (ID 18) X 1.0 AISI 321 L = 3 m
5) STEEL PIPE 1.5415 16Mo3 OD 18 X 1.8 ASTM A335 L = 3 m
The given lengths are for the manufacture of optimal calibration tubes.. one of each tube is requested for testing
Please note :
*) Position 2 : 1.4510 Low-Finn TUBE dimensions :
Number of fins: 26-27 / inch (-1063 fins/m) > distance
between fins -0.91mm
Height of fins: 1.3 mm
Tube thickness under fins: 1.06 mm
Tube inner diameter: 14.33 mm
Tube external diameter (under fins): 16.45 mm
Tube external diameter (finned part): 19.05 mm
Finned tube length 3m (no need for unfinned part).
Quote on MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Finland, Finland
Payment Terms : TT /LC
Looking for suppliers from : Worldwide
Contact : Mikael Keinonen
The buyer would like to receive quotations for -
Product Name: Calibration And Metering Equipment
Specifications:
1: Long range Indicator calibrator
Indicator calibrator optimar 25 with digital readout.
Application: for both analog dial indicator, dial comparator, level type test indicators & digital indicators.
Measuring range: 25mm
Resolution: 0,1um (0.0001mm)
Accuracy: 0+/- 0.2um
Power Supply: (220-240 VAC), 50Hz
Long clearly readable LCD monochrome digital display.
Selectable for either Metric or Inch
Output: USB interface for PC, RS232 Interface
Inspection Program: QN Software/dial – 32 with laptop and printer
Accessories: all operational accessories
Footswitch for data transfer supplied with calibration certificate issued by a laboratory accredited (including the calibration error and uncertainty)
List#4 Standard Glass Scale
High precision glass scale
Accuracy: 0.005mm
Line width: 0.005mm
Measuring range: (0-300mm)
Wooden Case
Calibration Certificate from national metrology institute (NMI)(VSL, PTB, NPL)
List#5 CERA Caliper Checker
Specification:
Wrung high-grade CERA gage blocks in a protective casting
Range: 0-600mm
Accuracy of block pitch: +/-0.005mm
Parallelism of block pitch: 0.005mm
Calibraton Certificate from accredited lab.
List #6 measuring tape and rule calibrator
Calibration unit for checking scales rule and measuring tapes with 0.001 mm resolution
Clamping range: upto 2000mm,
Drawer load range: 20n – 50N
Measurement uncertainty: ((0.05)^2 + (0.005L)^2)^0.5 where L: M
The instrument should be supplied with the required computer, software and accs.
Supplied with calibration certificate from national metrology institute (UME, vsl, or NPL)
List#8 Standard Thickness Foil
Standard block for calibration coating thkness gauge.
Range: (from 0.001 – 1)mm
Calibration certificate from accredited lab.
List #9 Precision Electronic Level
Wireless talyvel 6 electronic precession
Level flatness measurement with PC and Software
Measuring range: 1600s
Resolution: 0.1 arc-sec
Accuracy: +/-0.2sec
Power: 220VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List# 10 Small angle Generator
Used for calibration of angle measurement device (sprit level, electronic levels and autocollimators)
with software and PC
Range 1m SAG
Uncertainty measurement = 1 arc second.
Power: 220 VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List #11 Handheld, calibrator (process calibrator with portable pressure calibrator)
Measurement and electrical pressure generation at the touch of a button with integrated pump
From -0.8..+20bar (11.6..+290psi)
Accuracy: 0.025% of reading +/- 0.01% FS(including calibration certificate)
Generation/measurement of 4…20mA, 24V voltage supply to power transmitter
Pressure supply via external compressed air-line
With calibration certificate from national accredited lab.
List# 12 Process Calibrator
With Hydraulic handheld pressure with integrated medium reservoir & ergonomic handling
With hydraulic hand spindle pump with function for calibration & pressure switch test
Range: 0-1000 bar
Accuracy: 0.05% FS
Medium: non-corrosive gases, liquids, water
With complete 4 test and service cases
With refence pressure sensor (interchangeable without tools) 1.2m
With Calibration Certificate from national accredited lab
List #13 mechanical vacuum pump
Minus 1bar (220V 50Hz)
With Calibration Certificate from nationally accredited lab
List #14 High Performance Pressure Generation and Control 200MPa PPCH
Precision: to 0.003% of Q-RPT span.
Volume: 0-100cc, 50cc optimum, operated in larger volumes but pressure stabilizing time increases
Dynamic Mode typical time to ready
180sec into a 50cc volume & 20% FS excursions with default hold-limits 1.0 MPa (150psi) (lower in optimum conditions and with PG7302.
RS232 Cable, 9-in 2m for PPC3 COM1 or PPC3 to RPM4 connection
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms :
Ppe, protective suits, face masks n95 with ce certificates and surgical gloves, nitrile powder free gloves. covid 19, test kits, ventilators, difference size bottles with antibac gel. smart helmet high precision temperature screening, also some plastics scraps such as :pu foam scrap , eps block scrap, used oak barrels , ldpe film in bales , electric motors scraps
Please provide a quotation to the following requirement from importer -
Product Name: Hot Pressed Commercial Plywood
Specifications:
With & Without Calibration In 6, 9, 12, 16, And 18mm Thickness. Face/back In Bintangor
Qty; 1 Full Container 40hc Container.'
Quantity Required : 1 Forty-Foot Container
Shipping Terms : CIF
Destination Port : Tuticorin And Cochin., India
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Karunakaran Jayachandran
Please provide a quotation to the following requirement from importer -
Product Name: Eucalyptus Or Birch 8mm And 12mm Plywood
Specifications:"
E0 Grade
Phonelic
Cp/cp
2440x1220 / 1220x2440
Well Calibrated
Note : Only - Eucalyptus Or Birch - Not Mixed, We Use Both Plywood For Different Products)
Thickness: 8mm(5layer) And 12mm(7layer)
2440x1220 \ 1220x2440
Quality Cp/cp (both Face)
Quantity Required : 600 - 700 Cubic Meter/Cubic Meters
Shipping Terms : FOB
Destination Port : Italy
Payment Terms : LC/TT
Looking for suppliers from : Worldwide
Contact : Raffaele Dei Tos
The buyer would like to receive quotations for -
Product Name: Hot Wire Bottle Cutter
Specifications:
• Bottle is cut with high precision
• Rapid warming of the wires
• Energy saving design
• Up to 5 sections cut
• Durable design
• Easy to operate
• Cuts up to 2 L bottle
• Safety cover design which exhausts gases
out of face of the operator (optional)
• Excellent repeatability
• Preheating Mode / Cut Mode (heating max)
Main features:
• Dual heating mode saves energy and extends
the lifetime of wires
• Adjustable supports for bottles during the
cutting process
• Graduated rulers allow accurate positioning
of wires
Technical specifications:
• Sample range: Maximum height 360 mm
• Maximum diameter 125mm
Quantity Required : 2 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : Bank Transfer
Looking for suppliers from : Worldwide
Contact : Hussain Siddiq
Buyer is interested to receive quotations for the following RFQ -
Product Name : Low Fin Steel Pipe And Steel Tube
Specifications :
1) Steel Pipe 1.5415 16Mo3 OD 22 X WT 1.5 ASTM A335 L = 3 m
2) Low-fin Tube 1.4510 X3CrTi17 OD 19.05 / ID 14.33 X 1.65 AISI 439 L = 3 m. More precise measurements below*.
3) Steel Pipe 1.7380 10CrMo9-10 OD 16 (ID 13) X WT 1.5 ASTM A335 L = 3 m
4) Steel Pipe 1.4541 X6CrNiTi 18–10 OD 20 (ID 18) X 1.0 AISI 321 L = 3 m
5) Steel Pipe 1.5415 16Mo3 OD 18 X 1.8 ASTM A335 L = 3 m
The given lengths are for the manufacture of optimal calibration tubes.. one of each tube is requested for testing
Please note :
Position 2 : 1.4510 Low-Finn TUBE dimensions :
Number of fins: 26-27 / inch (-1063 fins/m) greater distance
between fins -0.91mm
Height of fins: 1.3 mm
Tube thickness under fins: 1.06 mm
Tube inner diameter: 14.33 mm
Tube external diameter (under fins): 16.45 mm
Tube external diameter (finned part): 19.05 mm
Finned tube length 3m (no need for unfinned part).
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Helsinki, Finland
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : Mikael Keinonen
Please provide a quotation to the following requirement from the importer -
Product Name: Hot Wire Bottle Cutter
Specifications:
- Attributes:
• Bottle is cut with high precision
• Rapid warming of the wires
• Energy Saving design
• Up to 5 sections cut
• Durable design
• Easy to operate
• Cuts up to 2 L bottle
• Safety cover design which exhausts gases out of face of the operator (optional)
• Excellent repeatability
• Preheating Mode / Cut Mode (heating max)
Main features:
• Dual heating mode saves energy and extends the lifetime of wires
• Adjustable supports for bottles during the cutting process
• Graduated rulers allow accurate positioning of wires
Technical specifications:
• Sample range: Maximum height 360mm
• Maximum diameter 125mm
Quantity Required: Sample - 1 Unit, Later: MOQ
Quantity Required : 1 Unit/Units(sample)
Shipping Terms : CIF
Destination Port : Saudi Arabia
Payment Terms : To be discussed with suppliers
Looking for suppliers from : Worldwide
Contact : Hussain Siddiq
