The buyer would like to receive quotations for -

Product Name: Calibration And Metering Equipment

Specifications:
1: Long range Indicator calibrator
Indicator calibrator optimar 25 with digital readout.
Application: for both analog dial indicator, dial comparator, level type test indicators & digital indicators.
Measuring range: 25mm
Resolution: 0,1um (0.0001mm)
Accuracy: 0+/- 0.2um
Power Supply: (220-240 VAC), 50Hz
Long clearly readable LCD monochrome digital display.
Selectable for either Metric or Inch
Output: USB interface for PC, RS232 Interface
Inspection Program: QN Software/dial – 32 with laptop and printer
Accessories: all operational accessories
Footswitch for data transfer supplied with calibration certificate issued by a laboratory accredited (including the calibration error and uncertainty)

List#4 Standard Glass Scale
High precision glass scale
Accuracy: 0.005mm
Line width: 0.005mm
Measuring range: (0-300mm)
Wooden Case
Calibration Certificate from national metrology institute (NMI)(VSL, PTB, NPL)

List#5 CERA Caliper Checker
Specification:
Wrung high-grade CERA gage blocks in a protective casting
Range: 0-600mm
Accuracy of block pitch: +/-0.005mm
Parallelism of block pitch: 0.005mm
Calibraton Certificate from accredited lab.

List #6 measuring tape and rule calibrator
Calibration unit for checking scales rule and measuring tapes with 0.001 mm resolution
Clamping range: upto 2000mm,
Drawer load range: 20n – 50N
Measurement uncertainty: ((0.05)^2 + (0.005L)^2)^0.5 where L: M
The instrument should be supplied with the required computer, software and accs.
Supplied with calibration certificate from national metrology institute (UME, vsl, or NPL)

List#8 Standard Thickness Foil
Standard block for calibration coating thkness gauge.
Range: (from 0.001 – 1)mm
Calibration certificate from accredited lab.

List #9 Precision Electronic Level
Wireless talyvel 6 electronic precession
Level flatness measurement with PC and Software
Measuring range: 1600s
Resolution: 0.1 arc-sec
Accuracy: +/-0.2sec
Power: 220VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology

List# 10 Small angle Generator
Used for calibration of angle measurement device (sprit level, electronic levels and autocollimators)
with software and PC
Range 1m SAG
Uncertainty measurement = 1 arc second.
Power: 220 VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology

List #11 Handheld, calibrator (process calibrator with portable pressure calibrator)
Measurement and electrical pressure generation at the touch of a button with integrated pump
From -0.8..+20bar (11.6..+290psi)
Accuracy: 0.025% of reading +/- 0.01% FS(including calibration certificate)
Generation/measurement of 4…20mA, 24V voltage supply to power transmitter
Pressure supply via external compressed air-line
With calibration certificate from national accredited lab.

List# 12 Process Calibrator
With Hydraulic handheld pressure with integrated medium reservoir & ergonomic handling
With hydraulic hand spindle pump with function for calibration & pressure switch test
Range: 0-1000 bar
Accuracy: 0.05% FS
Medium: non-corrosive gases, liquids, water
With complete 4 test and service cases
With refence pressure sensor (interchangeable without tools) 1.2m
With Calibration Certificate from national accredited lab

List #13 mechanical vacuum pump
Minus 1bar (220V 50Hz)
With Calibration Certificate from nationally accredited lab

List #14 High Performance Pressure Generation and Control 200MPa PPCH
Precision: to 0.003% of Q-RPT span.
Volume: 0-100cc, 50cc optimum, operated in larger volumes but pressure stabilizing time increases
Dynamic Mode typical time to ready
180sec into a 50cc volume & 20% FS excursions with default hold-limits 1.0 MPa (150psi) (lower in optimum conditions and with PG7302.
RS232 Cable, 9-in 2m for PPC3 COM1 or PPC3 to RPM4 connection

Quantity Required : MOQ

Shipping Terms : CIF

Destination Port : Jordan

Payment Terms :