Introduction: 4-hydroxyethyl piperazine ethosulfonic acid (HEPES) is an important hydrogen ion buffer, which has a good buffer ability in the pH range of 6.8 to 8.2, and can control a constant pH for a long time. Using a concentration of 10 ~ 50mmol/L, the general culture medium containing 20mmol/L 4-hydroxyethyl piperazine taurine can have a good buffer capacity, and has no toxic effect on cells. Application: HEPES (4-hydroxyethyl piperazinethesulfonic acid) is a non-ionic amphoteric buffer with high polarity, and is inert to a variety of chemical reagents and enzymes. It does not participate in and interfere with the process of biochemical reactions, and has no inhibitory effect on enzyme chemical reactions. Therefore, it can be used specifically for the research of proteins and enzymes that are highly volatile and ph-sensitive to organelles and very volatile. Buffer solution preparation: (1)hepes buffer can be directly added to the prepared culture medium according to the desired concentration, and then filtered to remove bacteria. 2.38 g HEPES was added to each 1000ml of culture medium, the pH was adjusted to 7.2 with lNNaOH after dissolution, and the bacteria were removed by filtration before use. At this time, the concentration of HEPES was 10mmol/L. (2) 100x storage solution (lmol/L) could also be prepared. Before use, 99ml culture solution was added to lml storage solution, and the final concentration was 10mmol/L. lmol/L (100x) hepes buffer was prepared as follows: 23.8gHEPES was dissolved in 90ml double distilled water, the pH was adjusted to 7.5-8.0 with lNNaOH, and then the water was fixed to 100ml, filtered to remove bacteria, divided into vials (2ml/ bottle), and stored at 4�ºC or -20�ºC. Purpose: 1.Biological buffer; Reaction buffer, prehybridization buffer and hybridization buffer for isolation and analysis of RNA nuclear fraction; For RNA with T4RNA 2.Molecular biology grade is used for RNA3' -end labeling with T4 RNA ligase 3.Cell-cell adhesion, short-term cell aggregation culture, cleaning of tissue and cell buffer
Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - Sampling, testing, and lab fees are not included because veterinary import requirements are not known - Visitation and selection costs by the buyer are not included
Improve breed like Boergoat for meat production. Same genetics only difference is colour (brown colour all round). Other traits the same as for Boergoat. Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaining at 4 monghs of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 â?? 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Improve breed like Boergoat for meat production. Same genetics the only difference is color (brown color all around). Other traits the same as for Boergoat. Improved breed for meat production: Hardy animals, resistant against external parasites and diseases; strong legs to walk far for food & water; very good mothering abilities & good milk production to raise twins; twinning common; fast growth; 30kg weight at weaning at 4 months of age; Live weight at slaughter 30 to 35 kgs and carcass weight 15 18 kgs; To supply goats at 6 9 months of age at weight of 35 to 45 kgs The FOB price quoted includes: sourcing and selection from breeder on farm, transport to quarantine facility, isolation, selection & approval by Breed Society, quarantine (management, handling, care, feeding), vaccinations, treatments, vet inspection, preparation for shipment, crate (one IATA approved crate can accommodate 50 animals), Veterinary and State Vet supervision, transport to airport, loading, health certificate, shipping & other documents. The FoB price excludes: - sampling, testing, and lab fees are not included because veterinary import requirements are not known - visitation and selection costs by the buyer are not included
Formula:KAl(SO4)2 12H2O Relative Molecular Weight:474.39 CAS NO,: 7784-24-9 EINECS No.:5637-689-7 HS CODE.: 2833301000 Appearance: lump, white crystal, white powder Properties:Colorless, transparent, particle or crystalline powder, odorless, nontoxic, tastes slightly sweet and puckery, astringent, easily soluble in water, its water solution appears acid,is would lose crystal water and become white powder on heating Usage; Food industry: Buffering agents and leavening agents in food-grade products. Chemical Industry: Water Flocculant, aluminum tanning agents and after-treating agents for leather tanning in the leather industry, dyeing agents,Astringents,mordants etc. Items Specifications Potassium aluminum sulfate [AlK(SO4)2.12H2O] % 99.5 Plumbum(Pb) mg/kg 5.0 Arsenic (As) mg/kg 2.0 Fluorine (F) mg/kg 30.0 Selenium (Se) mg/kg 30.0 Moisture % 4.0
Monocalcium Phosphate (MCP) Feed grade Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG28611997 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Specifications Appearance white powder or granule Total P 22%min Ca 13-18% F 0.18% max As 10 ppm max Pb 10ppm max Moisture 4%max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place
Aluminium tri-sec-butoxide Product Name: Aluminium tri-sec-butoxide CAS: 2269-22-9 MF: C12H27AlO3 MW: 246.32 EINECS: 218-871-2 Mol File: 2269-22-9.mol Chemical Properties Boiling point 40 C density 0.967 g/mL at 25 C(lit.) vapor pressure 23 hPa (195 C) refractive index 1.439 Fp 82 F storage temp. Flammables area solubility Miscible with alcohol, isopropyl alcohol and toluene. form Oily Liquid Specific Gravity 0.9671 color Light yellow Item Specifications Appearance Colorless transparent or light yellow liquid Purity % 99.99 Aluminum content % 10.2-12.5 Density ( g/cm3) 0.92-0.97
2-Naphthol Basic information Chemical Properties Application Preparation Product Name: 2-Naphthol Synonyms: c.i.37500;c.i.azoiccouplingcomponent1;c.i.developer5;Developer A;Developer AMS;Developer BN;developera;developerams CAS: 135-19-3 MF: C10H8O MW: 144.17 EINECS: 205-182-7 Product Categories: Fluorescent;Naphthalene;pigments;alcohol;MICROCIDIN;Color Former & Related Compounds;Developer;Functional Materials;Intermediates;Aromatic Compounds;Alphabetical;Bioactive Small Molecules;Biochemicals and Reagents;Building Blocks;C9 to C20+;Cell Biology;Chemical Synthesis;Fluorescent Indicators and Probes;Fluorescent Probes;Labels;N;Organic Building Blocks;Oxygen Compounds;Particles and Stains;pH Sensitive Probes and Indicators;Phenols;Dyestuff Intermediates;Aromatics Mol File: 135-19-3.mol 2-Naphthol Chemical Properties Melting point 120-122 C(lit.) Boiling point 285-286 C(lit.) density 1,28 g/cm3 vapor density 4.97 (vs air) vapor pressure 10 mm Hg ( 145.5 C) refractive index 1.5762 (estimate) Fp 153 C storage temp. Refrigerator solubility methanol: soluble1g/10 mL, clear, colorless to light yellow pka 9.51(at 25C) form Powder, Crystals or Granules color White PH Range Non& uorescence (8.5) to blue & uorescence (9.5) Water Solubility 1 g/L (20 C) �»max 226nm, 265nm, 275nm, 286nm, 320nm, 331nm Merck 14,6384 BRN 742134 Stability: Stable. Combustible. Dust may form explosive mixture with air. Incompatible with strong oxidizing agents, phenol. Major Application Display device, semiconductors, photoimaging materials, inks, toner, chalk, security paper, molding materials, tin plating method, rubber, adhesive, leather, detergent, hair dyes, antimitotic drug, anticancer agent, antiinflammatory agent, treatment of acne vulgaris (pimples) and other dermal ailments (rashes, scratches, blemishes, hair loss), disorders InChIKey JWAZRIHNYRIHIV-UHFFFAOYSA-N CAS DataBase Reference 135-19-3(CAS DataBase Reference) NIST Chemistry Reference 2-Naphthalenol(135-19-3) EPA Substance Registry System 2-Naphthalenol (135-19-3) Safety Information Hazard Codes Xn,N Risk Statements 20/22-50 Safety Statements 24/25-61 RIDADR UN 3077 9/PG 3 WGK Germany 2 RTECS QL2975000 F 8 Autoignition Temperature 430 C TSCA Yes HazardClass 9 PackingGroup III HS Code 29071590 Hazardous Substances Data 135-19-3(Hazardous Substances Data) Toxicity LD50 orally in Rabbit: 1960 mg/kg LD50 dermal Rabbit > 10000 mg/kg 2-Naphthol Usage And Synthesis 2-Naphthol Preparation Products And Raw materials
Other Name: HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID INCI Name: HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID Molecular Formula: C8H18N2O4S Molecular Weight: 238.3 Appearance: White powder Purity: 98% CAS NO.: 7365-45-9 EINECS No.: 230-907-9 Application: cosmetics and skin care products Supplier: ZHENYIBIO HYDROXYETHYLPIPERAZINE ETHANE SULFONIC ACID has a certain effect of softening cutin and assisting in whitening; in cosmetics, it is a hydrogen ion buffer, which can control a constant pH range for a long time. Hydroxyethylpiperazine ethane sulfonic acid is a very effective biological buffer, which can reform the stratum corneum and promote the metabolism of skin keratinocytes. It is an important mild exfoliating ingredient.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
WE HAVE THE SUGAR IF YOU CAN LIVE WITH OUR TERMS BELOW. WE HAVE MADE AND ARE CURRENTLY MAKING DELIVERIES UNDER THESE TERMS. We, below present our general procedures for the purchase and sale of sugar of Brazilian origin: 1- Buyer issues a Letter of Intention (LOI) addressed to Seller; 2- Seller issues a Soft Corporate Offer (SCO); 3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller; 4- Seller issues Full Corporate Offer (FCO); 5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller; 6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented; 7- SPA is signed by Seller and Buyer; 8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank; 9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC); 10- Seller issues Performance Bond (PB) 2%; 11- Seller prepares the product and export documents; 12- Buyer receives the export documents by mail; 13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103); 14- Shipping; 15- Seller sends the original export documents to Buyer; NOTES: The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking. The issuance of a financial instrument (SBLC / DLC) can be replaced by a 30% guarantee deposit that will be applied in the last delivery of the contract (in the case of 12-month programs) or in the settlement of the single payment in the case of spot sales. This procedure applies to SPOT sales and 12-month Programs. MINIMUM SPOT ORDER IS 12,500 MT, NO EXCEPTIONS https://raargroupusa.com/icumsa-45-sugar We do offer container loads and spot orders of a minimum of 12,500 ton. We need to know your target price and delivery location in order to quote. Please send us your Target Price if you are serious.
Nisin, E234, CAS no.1414-45-5 is manufactured by fermentation process, used as safe natural food preservative. Nisin is used and applied in meat products, dairy products, canned seafood, drinks, fruit drinks, liquid eggs and egg products, condiments, winemaking, baked goods, convenience food, incense fragrances, cosmetics field, etc.. during production to extend shelf life by suppressing Gram-positive spoilage and pathogenic bacteria. As an experienced Nisin manufacturer and supplier, we has been supplying and exporting Nisin for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Nisin Specification ITEM STANDARD Appearance Light brown to cream white powder Potency (IU/ mg) 1000 Min Loss on drying (%) 3 Max pH (10% solution) 3.1- 3.6 Arsenic 1 mg/kg Lead 1 mg/kg Mercury 1 mg/kg Total heavy metals ( as Pb) 10 mg/kg Sodium chloride (%) 50 Min Total plate count 10 cfu/g Coliform bacteria 30 MPN/ 100g E.coli/ 5g Negative Salmonella/ 10g Negative
L-Serine powder, CAS No.56-45-1, non essential amino acid manufactured via fermentation from carbohydrate sources, free of materials of animal origin. As an experienced L-Serine manufacturer and supplier, we has been supplying and exporting L-Serine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 18000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 56-45-1 HS Code 292250 Specification Feed/Food Grade L-Serine powder Specification ITEMS STANDARD Appearance A white or almost white, crystalline powder or colourless crystals. Solubility Freely soluble in water,practically insoluble in alcohol. Identification test (A,B) Up to the STANDARD Appearance of solution Clarity of solution:5% water solution should be clear Colour of solution:5% water solution should be not more intensively coloured than reference solution BY6 Specific optical rotation +14.0�° to +16.0�° Assay 98.5-101.0% Chlorides 200ppm max Sulphates 300ppm max Ammonium 200ppm max Iron 10ppm max Heavy metals 10ppm max Loss on drying 0.5% max Sulphated ash 0.1% max Ninhydrin-positive substances (TLC) Up to the STANDARD
Dl Aspartic Acid, CAS No.617-45-8, is a mixture of L Aspartic Acid and D Aspartic Acid manufactured through fermentation, available as white powder. Dl Aspartic Acid is an amino acid widely used in nutritional supplements, nutrition enhancers, dietary supplements, health food additives, pharmaceutical raw materials, sports supplements, sports nutritional supplements, and bodybuilding supplements. As an experienced Dl Aspartic Acid manufacturer and supplier, we has been supplying and exporting Dl Aspartic Acid for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Product Description Categories Amino Acids Qty in 20â??FCL 10000kg Min Order 500kg Origin China Packaging Factory Packaging or Neutral Certificate ISO, Kosher, Halal, BRC CAS No. 1783-96-6 HS Code 292249 Specification Feed/Food Grade
Inosine, CAS No.58-63-9, is a nucleoside manufactured through fermentation, available as white crystalline Powder. Inosine is widely used in nutraceutical, nutritional supplement, and food additive applications. Inosine is an amino acid that is a kind of coenzyme drug widely used in the medicine and the food industry. Inosine is also used as an important feed stimulant or combine with other amino acids in some species of farmed fish. As an experienced Inosine manufacturer and supplier, we has been supplying and exporting Inosine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Inosine powder Specification ITEM STANDARD Appearance White crystalline Powder Identification Positive in No.1, 2, 3 Test State of solution transmittance Clear and colorless ot less then 98% Loss on drying 1.0% Heavy metals(Pb) 10ppm Assay 98.0~102.0% Residue on ignition 0.2% Other Related compounds of nucleic acid Chromatographically not detectable Arsenic(As2O3) 1ppm PH 4.8-5.8
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Sodium Caseinate, E469, CAS no.9000-71-9, protein-rich milk derivative. It supplies essential amino acids, carbohydrates, sodium, calcium, and phosphorus. Sodium Caseinate is an excellent emulsifier and thickening agent that is commonly used in the food industry to improve the retention of fat in foods and water, prevent syneresis, contribute to the uniform distribution of the various ingredients in the food processing, and improve the texture and taste of food. It is often used in bread, biscuits, candy, cakes, ice cream, yogurt drinks, and margarine, gravy, fast food, meat and seafood products. As an experienced Sodium Caseinate manufacturer and supplier, we has been supplying and exporting Sodium Caseinate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. Sodium Caseinate Specification ITEMS STANDARD Appearance Creamy Powder Content % 90.0 Moisture % 6.0 Mold g 10 PH 6.0-7.5 Fat % 2.00 Ash % 6.00 Viscosity Mpa.s 200-3000 Solubility % 99.5 Total Plate Count 30000/G Pathogenic Bacteria Negative E.coil Not available at 0.1g Salmonella Not available at 0.1g