Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
Product description White corundum is made of high quality aluminum oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance and stable thermal performance. Its hardness is slightly higher than that of brown corundum.It is suitable for grinding fine grain abrasive such as high carbon steel, high speed steel and stainless steel. chemical component Physical characteristics size AL2O3 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5% 0-1mm 1-3mm 3-5mm 5-8mm â?¥99.5% 100#-0 200#-0 320#-0 â?¥99% FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 â?¥99.2%
White fused alumina powder /emery/corundum 1. Description: White Alumina powder is fused from high quality bayer aluminum in high temperature. Its hardness is higher but toughness lower compared with Brown Aluminum Oxide. It is characterized by high purity, excellent self-sharpening, efficient grinding efficiency, and low frictional heat. It can withstand acid and alkali erosion, with high temperature resistance and good thermo stability. 2. Applications: The abrasive tools made of it are suitable for grinding high carbon steel, high-speed steel and chilled steel. It can also be used as lapping and polishing medium, precision founding sand, coating materials, catalyst carrier, special ceramics and super refractory materials. 3. Advantages: a. Use imported Bayer aluminum; assure the high quality of products. b. Equipped full line of test method. The laboratory is certified by government Inspection Bureau, that assures its quality stability. c. Products are classified chemical washed, non-washed, shaped, non-shaped, normal bulk density and high bulk density. All products will be supplied according to customers different requirements. 4.Size we manufacture: 8-5mm, 5-3mm, 3-1mm, 0-1mm 320mesh-0, 280mesh-0, 240mesh-0, 200mesh-0, 180mesh-0 F8, F10, F12, F14, F16, F20, F22, F24, F30, F36, F40, F46, F54,F60, F70, F80, F90, F100, F120, F150, F180, F220, F240, F280, F320F360, F400, F500, F600, F800, F1000, F1200 Chemical compositionsPhysical properties Al2O3 99.50min Color White SiO2 0.08max Bulk density 1.75-1.95g/cm3 Na2O 0.26max True density 3.95-3.97g/cm3 About us Zhengzhou Haixu Abrasives Co., Ltd, founded in 1999, is specialized in abrasive WFA white fused alumina oxide, Brown Fused Alumina, Mullite and other related products. Our production runs under the certifications of GB, ISO, FEPA, and JIS. We offer various items depending on the demands of our customers.Currently, we have exported our products all over the world, such as Europe, the USA, India, and Japan, enjoying good reputation in machinery, metallurgy, light industry and other fields
Material: Abrasive Garnet Sand Size: 0.25 - 2.5 MM Color: Reddish Specific Gravity: 4.0 - 4.1 Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Sandblasting with Abrasive Garnet Sand - During the surface preparation process, Abrasive garnet is blasted onto the surface of the steel using high-pressure compressed air. It can be found in high-quality coated and bonded abrasives such as abrasive papers, clothing, and wheels. Abrasive garnet sand is a mineral-free, iron-free substance with a wide range of applications. High-pressure water jet cutting is its primary application as abrasive sand. Garnet sand is a good abrasive and a common sandblasting replacement for silica sand. Rounder Garnet Sand is better suited for such blasting treatments.
Shape: Spherical Color: White / Color-Less Bulk Density: 1.5 -1.6g/cm3 Hardness: 5.5 - 6.0 Moh Finishing: Smoothing Melting Point: 600�°C Material: Clear glass Pattern: Solid Plain Packaging Size: 25 Kg / 50 Kg / 1 Ton Packaging Type: HDPE Woven Gunny Bags Transport Type: Land / Sea / Air Transport Application Surface finishing- Glass Bead blasting can be used on an extended range of substances with glass, plastic, metal, and rubber. The littler the glass spheres, the evener the surface; greater spheres produce an extra textured finish. To defend special areas or in detail aquatint resolves, areas can be effortlessly masked with tape. Cleaning- Glass Bead blasting eliminates foreign elements from the external without a dimensional alteration to the surface. A wide range of bead sizes is available. For example: removing paint, degreasing, light corrosion, and nearly any other surface pollutants. Glass beads may also be utilized to make surfaces for paint adhesion, gasket sealing, or lubrication retention. Deburring- Glass Bead blasting removes burrs, and feathered edges, and alternates from portions in an accuracy process. Corners and edges must be deburred with accuracy to assemble and operate correctly. Glass bead blasting promises that no base metal from the exterior is removed. Gentle and finished areas may be easily masked for protection. Shot peening- Peening with this type of abrasive is a less-cost form of generating an unchanging surface coating of crushed stress in alloy materials. Peening turns to combat stress cracks and rust, resulting in a growing life of metal portions. The high degree of chubbiness of our Glass Bead media progresses the performance of stress confrontation processes.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Manufacturers selling white corundum abrasive powder, white corundum, white corundum is high-quality aluminum oxide powder as raw material, the crystal in a fused, slightly higher than the corundum hardness, toughness is a bit low, high purity, good self sharpening, strong grinding ability, low calorific value, high efficiency, high temperature, acid and alkali corrosion thermal stability is good. It is used to make grinding tools for grinding high speed steel, high carbon steel and so on. It is widely used in consolidation grinding tools, coated abrasives, polishing and precision casting industries. White corundum abrasives are suitable for surface treatment and beautification of various high-end products, crafts or hardware products. After blasting, the surface is clean without any impurities. Because white corundum is made by electrofusion and crystallization, its hardness is slightly higher than that of brown corundum, its toughness is slightly lower, its purity is high, acid and alkali resistance is corroded, and high temperature and thermal stability are good. It is a high-grade refractory material. Fine white corundum can be used for polishing and grinding, and can also be used as a kind of additive for various products. The granularity of the white corundum products produced by Ningxia Tengyuan environmental protection material Co., Ltd. is manufactured according to international standards and national standards, and can be processed according to the requirements of the user. The general particle size is F4~F220, and its chemical composition varies depending on the size of the particle. The prominent feature is small impact resistance to crystal size. If the grinding machine is broken, the particles are mostly spherical particles, the surface is dry and easy to bond.
Product description White corundum is made of high quality aluminum oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance and stable thermal performance. Its hardness is slightly higher than that of brown corundum.It is suitable for grinding fine grain abrasive such as high carbon steel, high speed steel and stainless steel. chemical component Physical characteristics size AL2O3 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5% 0-1mm 1-3mm 3-5mm 5-8mm â?¥99.5% 100#-0 200#-0 320#-0 â?¥99% FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 â?¥99.2%
Product description White corundum is made of high quality aluminum oxide powder as raw material, refined and crystallized by electric melting. It has high purity, good self-sharpening, acid and alkali corrosion resistance, high temperature resistance and stable thermal performance. Its hardness is slightly higher than that of brown corundum.It is suitable for grinding fine grain abrasive such as high carbon steel, high speed steel and stainless steel. chemical component Physical characteristics size AL2O3 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# 240# â?¥99.5% 0-1mm 1-3mm 3-5mm 5-8mm â?¥99.5% 100#-0 200#-0 320#-0 â?¥99% FEPA:F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 F2000 JIS:#240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 â?¥99.2%
Raw Bauxite: Bauxite is a soft, whitish to reddish-brown rock consisting mainly of alumina-bearing hydroxides, oxides of iron, silicon and titanium with impurities of Ca, Mg, Cr, V, P, Ga and other elements. Raw Bauxite is a major source of aluminium. Basic alumina containing minerals of Bauxites are gibbsite Al(OH)3, Boehmite g-AlO(OH) and Diaspore a-AlO(OH). We are a major Raw Bauxite Exporter based in Maharashtra (India) and catering to the diverse demands of several middle and eastern Asian countries. About Raw Bauxite: The processing of Raw Bauxite is done at a number of alumina refineries in the world. Bauxite can be processed at a low-temperature autoclave digestion (145 oC to 155 oC). Raw Bauxite can be used also for sweetening stage and for non-autoclave digestion in agitators (105 oC). About 85% of bauxite mined worldwide is used to produce alumina for refining into Aluminium metal and the balance 15% is processed and value added to make its way to other uses like refractory, chemical, cement, abrasives, etc. Aluminium is possibly the most versatile product with applications in almost every industry. Since Bauxite is the primary source for Aluminium there will always be an ongoing promising demand for the same. Application & Uses of Bauxite: Raw Bauxite is successfully used for metallurgical grade alumina production besides applications in the cement industry, alumina chemical, steel, alum, energy industries, flame-retardants, etc. Bauxite is used in : - Aluminium - Cement - Chemical - Blast Furnaces - Iron/Steel Ladles, etc. Advantages of Artha Bauxite: Artha Mineral Resources has good sources for Gibbsitic Bauxite which requires low digestion temperature (145 oC -155 oC) making it more economical to process. Mines are also in close proximity to all-weather ports which makes it very convenient and cost effective to ship this material.
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
SizeMagikTM-LP4 - LOW PICK UP ONE-SHOT PRODUCT DESCRIPTION An unique copolymer sizing agent for cotton compact yarn. Special product for air jet loom. Heavy fabric constructions are easier to weave at low-size add-ons using SizeMagik-LP4. The low add-on also permits greater protection on high-speed looms expensive reeds and sensitive mechanical parts life. SPECIFICATIONS 1. Appearance: Off white Granules 2. Solubility: Soluble at 800C 3. Viscosity of 4% solution: 10 to 30 cPs (Brookfield viscometer LVDV II+ pro -Spl.2 , rpm:100 @ 80oc) 4. Ash content (w/w) : Max 3% 5. Bulk density (gm/ml) : 0.65 to 0.85 COOKING METHOD 1. Fill the required quantity of water in the cooker. 2. Gradually sprinkle SizeMagikTM-LP4. 3. Add the required quantity of softener. 4. Close the pressure cooker lid. 5. Open the steam value and cook to @ 120�¯�¿�½?�?�ºC or 35psi. 6. Retain in the cooker for 15 to 20 minutes. 7. Then transfer the size mix to storage. ECONIMICAL ADVANTAGES Yarn abrasion resistance is an important factor affecting weave ability. The friction between the warp to warp and warp to the weft is important in determining the weaving quality. Another important abrasion point in the loom is mechanical parts (Reed, Dropper pin, Heald wire, Weft picking element). Compare with other conventional size mixes and one-shot size products SizeMagik-LP4 gives better abrasion resistance strength. DE-SIZING Easily de-sizable product with hot alkali treatment. STORAGE Keep away from direct sunlight and store in a cool, dry, and well-ventilated place. STABILITY Stable for one year from the date of manufacture. PACKING Available in 50Kg net weight PP bags with moisture-proof liner inside.
Supplier abrasive corundum pink is made of alumina powder as the main raw material, suitable for chromium oxide, etc., after smelting at high temperature.Its hardness is similar to white corundum and its toughness is higher than that of white corundum.The abrasive tools made by it have good durability and high finish.It is suitable for precision grinding of gauge, instrument parts, thread workpiece and sample mill.
Aluminium oxide is used in blasting cabinet or blast rooms, in an area where you can recycle. It is used to shot blast chassis components, alloy wheels, brake callipers, small ferrous components. Aluminium Oxide is used in the aero space industry . Aluminum oxide is used in boned abrasives or refractory or coated abrasives. Barmac/angular Available in pink/brown/white. F12-F220 0-1mm 1-3mm 3-5mm 5-8mm P12-P220
White skin No broken bones 0% Well cleaned and fresh No bruises No black pads or ammonia burns No bad smells No excessive blood or bloodstains Moisture content is less than 3% Weight per piece is 45g 20% front and 80% hind feet Frozen Temperature: Blasted at: minus 40 degrees Celsius Storage at: minus 20 degrees Celsius Transportation Temperature: -18 C
White skin No broken bones 0% Well cleaned and fresh No bruises No black pads or ammonia burns No bad smells No excessive blood or bloodstains Moisture content is less than 3% Weight per piece is 45g 20% front and 80% hind feet Frozen Temperature: Blasted at: minus 40 degrees Celsius Storage at: minus 20 degrees Celsius Transportation Temperature: -18 C
Deals in activated carbon powder, granular activated carbon, sawdust, wood sawdust, biomass briquettes, white coal, iron ore, laterite, spices, raw salt, refined salt, bleaching earth, mill scale, hms scrap, low ash metallurgical coke, marine gypsum, silica sand,silica flour,quartz, hematite powder, bentonite powder, china clay, quartz sand, fly ash, kaolin clay.indonesian coal, South African coal, coke fines, ground granulated blast furnace slag ,coal based activated carbon,zinc ash,zinc dust,zinc,coal dust,earthing coal,coke breeze,talc powder,dolochar,gypsum powder, plaster of pairs, aggregate, marine gypsum, gypsum powder, pop & coke fines, washed marine gypsum,quartz powder excavator .
Abrasive ruby corundum is made of 94% alumina as the main raw material., after smelting at high temperature. Its hardness is similar to white corundum and its toughness is higher than that of white corundum. The abrasive tools made by it have good durability and high finish. It is suitable for precision grinding of gauge, instrument parts, thread workpiece and sample mill