Industrial Vaseline Parameter Specification Result Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies Melting Point 45-60°C 58°C UV Absorbance 0.50 (290nm) 0.143 ConePenetration (0.1mm) 122 Residue on ignition 0.05% 0.032 Sulfide 0.00017% Complies Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink Complies Density 0.815-0.880 (60°C) 0.832 Organic Acids Show red Complies Fixed oils, fats&Rosins No ppt or oily matters is produced Complies Heavy metal 0.003% Complies Arsenic salt 0.0002% Complies Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm Complies
We produce the various specification petroleum jelly(vaseline) for medical usage. Our technical staff will provide your fully support relevant to our product if you need. For more details vaseline specification please contact with us. 170kgs new iron drum
We produce the various specification petroleum jelly(vaseline) for industrial usage. Our technical staff will provide your fully support relevant to our product if you need. For more details vaseline specification please contact with us. 170kgs per drum
Medical Vaseline Parameter Specification Result Appearance White or Yellowish Translucent soft unctuous,odorless,has certain drawing Complies Melting Point 45-60°C 59°C UV Absorbance 0.50 (290nm) 0.148 ConePenetration 130-230 (0.1mm) 148 Residue on ignition 0.05% 0.031 Sulfide 0.00017% Complies Acidity or Alkalinity Plus phenolphthalein colorless and methyl orange can not show pink Complies Density 0.815-0.880 (60°C) 0.837 Organic Acids Show red Complies Fixed oils, fats&Rosins No ppt or oily matters is produced Complies Heavy metal 0.003% Complies Arsenic salt 0.0002% Complies Polycyclic aromatic hydrocarbons Absorbance at 260-420nm not more than the absorbance at 278nm Complies
White petroleum jelly, yellow petroleum jelly, n-methyl aniline.
Soda ash light / dense 99.2% sodium bicarbonate caustic soda flakes 99% sodium sulphate anhydrous (ssa) 99% sodium sulphite flakes (ssf) 60% sodium metabisulphate hydrogen peroxide (h2o2) 50% formic acid 85% glacial acetic acid paraffin wax liquid paraffin (white oil) lp 100 menthol crystal fumed silica deg (di ethylene glycol) mono ethylene glycol (meg) poly ethylene glycol (peg), base oil 150n, bs 150, 600n bitumen 60/70 rpo (rubber process oil) lioh (lithium hydroxide) hco (hydrogenated castor oil) 12 hsa (hydroxy stearic acid) ferrous sulphate heptahydrate additive for lubricating oil aromatic chemicals.Exporting of chemicals & other products
Usage: Candles, Grease, Oil pastels, Petroleum jelly Properties Unit Specification Melting Point 65.5-76.6 Oil content % wt Max.10 Penetration 25 ,100g,5sec Max.100 Color - Max.L1 Proportion 15/4 0.82-0.84 Flash point Min.200 Viscosity cSt 7-15 Packaging Kg (bag) 25
1.High molecular weight and narrow molecular weight distribution , without any low molecular substances. 2.High viscosity, good lubricity and transmission shear force. 3.Balance the lubrication and dispersion. 4.Low thermal weight loss and good thermal stability. 5.No migration and precipitation. 6.Through SGS,REACH,ROHS and other certification.
Fischer-Tropsch wax is a methylene polymer synthesized from hydrocarbon-based syngas or natural gas, and it is mainly synthesized from iron or cobalt by relying on high-quality and inexpensive raw materials from the coal chemical industry. It has a clear advantage over the price of crude oil waxes. Fischer-Tropsch waxes have a wide range of applications, one of which is in the field of adhesives, where they are used as an ideal synthetic wax for EVA-based hot melt adhesives. The high melting point of Fischer-Tropsch waxes improves the heat resistance and fast drying properties of adhesives, thus enhancing the performance of adhesives. Fischer-Tropsch waxes are commonly used in food packaging and pharmaceuticals as food additives to enhance product stability and extend shelf life. In the pharmaceutical and cosmetic industries, Fischer Tropsch Wax is often used as an adhesive, emulsifier, etc.
Casting wax, high and medium temperature precision casting particles, bead shaped, high hardness, small linear shrinkage, good toughness, good stability, can be used repeatedly. Another water-soluble casting wax, repair wax, adhesive wax and other supporting products; Model wax is used as the mold material for art casting and precision machine tool processing. Of course, what is usually used for jewelry casting is "casting wax" in the shape of beads.
An additive intermediate prepared from highly active polyisobutylene (molecular weight=1000). The products can be used for producing various types of polyisobutylene succinimide and boronized dispersants. It can also be used for the production of emulsifiers and processing aids for petrochemical plants. The recommended addition is 2 % - 10 %.
SC178 is a modified micronized Fischer-Tropsch wax that is a primary replacement for fluorinated mixed wax powders for general purpose inks, coatings, wood finishes and more. A more economical one, balancing performance and cost, is available:Less matting,Good slipperiness,Excellent abrasion resistance and Anti-adhesion properties. SC178 has an average particle size of 5.5 to 6.5 microns with a maximum particle size of 21 microns. It is recommended to add 0.5-1% of SC178 to the system.SC178 is insoluble in solvents at room temperature as well as UV-based monomers and oligomers.
SC178 is a modified micronized Fischer-Tropsch wax that is a primary replacement for fluorinated mixed wax powders for general purpose inks, coatings, wood finishes and more. A more economical one, balancing performance and cost, is available:Less matting,Good slipperiness,Excellent abrasion resistance and Anti-adhesion properties. SC178 has an average particle size of 5.5 to 6.5 microns with a maximum particle size of 21 microns. It is recommended to add 0.5-1% of SC178 to the system.SC178 is insoluble in solvents at room temperature as well as UV-based monomers and oligomers.
Product features -There is a suitable phase transition temperature, which can meet the specific temperature that needs to be controlled -High linearity and narrow carbon number distribution -High heat storage capacity - High energy storage density - Constant temperature heat storage and release - Chemically stable and inert; Long service life - Non toxic, non corrosive -No supercooling and phase separation -Rapid crystallization rate and crystal growth rate Application fields of phase change materials: Thermal components for temperature regulation Industrial waste heat utilization Power generation and power transmission Clean energy Energy storage power plant Phase change energy storage water heater
Vaseline is a mixture of mineral oil, paraffin and microcrystalline wax, when they are mixed together; Create something extraordinary - a smooth jelly with a melting point slightly above body temperature. Item Quality standard Result Single conclusion Relative density  60 C 0.815-0.880 0.862 Compliance with regulations Drop point C 38-70 46.4 Compliance with regulations (one) The upper layer shall be purple pink or brown Qualified Compliance with regulations Infrared absorption spectrum(two) Consistent with the map of the control group Qualified Compliance with regulations Cone penetration 25 C ±0.5 C 100-300 174 Compliance with regulations PH light pink Qualified Compliance with regulations Colour Lighter than colorimetric solution Qualified Compliance with regulations Impurity absorbance 290nm 0.75 0.15 Compliance with regulations sulfide 0.00017% Qualified Compliance with regulations Organic acid Should be red Qualified Compliance with regulations Heterogenous organic matter and fabric burning residue No pungent odor:0.5 0.02% Compliance with regulations Fixed oil, fat and turpentine No oil and sediment shall be formed Qualified Compliance with regulations Heavy metal ppm â?¤30 Qualified Compliance with regulations Arsenate 0.0002% Qualified Compliance with regulations Polycyclic aromatic hydrocarbon Comply with the Pharmacopoeia Qualified Compliance with regulations
Casting wax, high and medium temperature precision casting particles, bead shaped, high hardness, small linear shrinkage, good toughness, good stability, can be used repeatedly. Another water-soluble casting wax, repair wax, adhesive wax and other supporting products; Model wax is used as the mold material for art casting and precision machine tool processing. Of course, what is usually used for jewelry casting is "casting wax" in the shape of beads.It can apply in commercial hardware, golf heads, thin-wall parts, and aerospace industries. R&B Softening Point 72.5-85.0 Drop Melting Point 84.5-95.5 Penetration 14.0-20.0DMM Percent Ash
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on. Features and Benefits: 1.Good hardness 2.Good lubricity 3.Good chemical stability Properties Unit Test Method Specifications Melting point C ASTM E 28 107 3 Density g/cc 23 C ASTM D 1505 0.93 Hardness d-mm 25 C ASTM D 5 5 Acid value Mg KOH/g ASTM D 1386 10 1 Appearance Yellowish powder
Application:As a lubricant, film remover and phase solvent for rubber and plastic processing, due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, and plays the role of internal and external lubrication. Features and Benefits: 1.Good thermal stability 2.Good lubricity 3.Good dispersion Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 130 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
Application:It is widely used in the production of PE and PVC cables, PVC profiles and pipes. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced; The lubricity of oxidized polyethylene wax in the hard, transparent and opaque PVC formulation is better than that of other lubricants. Features and Benefits: 1.Good hardness 2.Good thermal stability 3.Good lubricity Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 128 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
Features and Benefits: 1.Good lubricity 2.Good dispersion 3.Good chemical stability Properties Unit Test Method Specifications Mettler drop point C ASTM D3954 128 Density g/cc ASTM D1505 0.99 Hardness d-mm ASTM D-5
