Steel scrap.
product origin : Middle East
Protective clothing, protective footwear, headwear, gloves, fashionwear, headwear we cater for all needs in the textile industry.
Furnaces, moulding machines, rolling mills, shot blasts.
* Product: Copper Scrap * TYPE: WIRE Covered With Rubbers * Purity: 99.99% * Price: USD 4,600 per Ton * Origin: Ghana � West Africa * Quantity: 1000 Tons (subjected to 100 Tons Trial shipment) * LOADING PORT: Tema Port Harbor. * Packaging: Loose / Big bag of 500KG put in Container * Specification: As per export standard request Copper: 99, 9% Carbon: 0.03% Coblet:
Used rails R50-R65: Specifications Of Used Rails R50 R65:- 1. R50(51.67KG/Meter, GOST 7173-55) 2. R65(64.72KG/Meter, GOST 8161-75) Composition : C - 0.71 - 0.84%: Mm-0.75 - 1.25 % : Si- 0.18 - 0.55% : S - not more than 0.045% : P - not more than 0.035% Nominal Specification for R-50 (51.67KG/M, GOST-7173-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max Nominal Specification for R-65(64.72KG/M, GOST -81(65-75): Carbon - 0.4%- 0.58% Manganese - 0.75% 0.88% Silicon - 0.13% ? 0.28% Sulphur - 0-045% to Max Phosphorous - 0.035% to Max Arsenic - 0.13% to Max
Copper wire scrap,Copper Wire Scrap ,Millberry Copper99.9% High Quality Cheap Copper Wire Scrap/Millberry 99.95% Copper Wire Scrap 1) Our copper scrap includes wires, tubes, and plates, etc. 2)The size is chips or other. 3) Copper content could meet customers need. Application: Electrical, light industry, machinery,national defense industry . Copper Scrap is industry a important sources of the raw materials, all kinds of can be recycled Recycling waste production with copper
Copper cathode SPECIFICATIONS: DIMENSIONS 914MM X 914MM X 12MM WEIGHT PER SHEET 125KG (+/- 1%)   NET WEIGHT PER PALLET 2MT APPROXIMATELY MINIMUM WEIGHT IN EACH CONTAINER 25MT APPROXIMATELY GROSS WEIGHT OF EACH CONTAINER 27.2MT APPROXIMATELY PACKAGING PALLETIZED, ALUMINUM BAND COPPER CATHODE CHEMICAL ANALYSIS CU 99.99-99.97% BASIS, REJECTION BELOW 99.97 INSPECTION: SGS or CCIC or Similar; OTHER ELEMENTS Silicate (Si) 0.3ppm Tellurium (Te) 0.5ppm Cobalt (Co) 0.2ppm Silver (Ag) 10ppm Lead (Pb) 0.2ppm Selenium (Se) 0.3ppm Iron (Fe) 2ppm Sulphur (S) 4ppm Aluminum (Al) 0.5ppm Magnesium (Mg) 0.4ppm Manganese (Mn) 0.5ppm Oxygen (O2) 0.00ppm Nickel (Ni) 0.2ppm Non Radioactivity Antimony (Sb) 0.1ppm Arsenic (As) 0.1ppm Bismuth (Bi) 0.1ppm Bill of lading: The official document, issued at the load port after completion of the loading operations, stating among other things, the shipâ??s loaded quantity, expressed in Cubic Meters (M3) and in Metric Tons (MT) per the definitions herein. This document has to be signed in original by the shipâ??s Master and made out in accordance without the instruction hereinafter specified in the Agreement
Product Description And Chemical Composition / Packaging Specifications related to the content and quality of goods are as per details below: Non-LME Registered Primary Aluminium Ingot Purity: 99.7% Appearance: Silvery White Individual Ingot Weight: 22.5 kg Individual Ingot Dimensions: 740mm x 170mm x 114mm Number of Ingots per Bundle: 44 Bundle Dimensions: 740mm x 740mm x 1,025mm Nominal Weight of Bundle: 1,000 kg Bundle Strapping Material: Polyester Straps Strapping configuration: 3 Parallel Straps Chemical Composition Origin Russia or Ukraine Price $1850 MOQ (Trial) = 250 MT. Monthly quantities up to 2,000 5,000 MT available. A Element % Content Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.04 max. Vanadium (V) 0.03 max. Others (Each) 0.03 max. Others (Total) 0.10 max. Aluminium (Al) 99.7% min. B Element %Content Aluminium (Al) 99.7 min. Silicon (Si) 0.10 max. Iron (Fe) 0.20 max. Zinc (Zn) 0.03 max. Gallium (Ga) 0.03 max. Copper (Cu) 0.01 max. Magnesium (Mg) 0.02 max. Others each 0.03 max. Total of other impurities 0.30 max.
Coltan, copper, copper millbery, copper cathode, cast aluminium, drains car battery, HMS 1&2 scraps.Sourcing agents
Food, consumer and industrial fields.General trade
Matting and industrial products.
Brake shoes are boxed in axal sets of 4 shoes. Each box set are made to each manufactuerers size and vehicle specifications ie:- ford.Bmw rover group, touota, honda, just a few to mention. Boxed
Industrial metalworking and engineering machinery.Shipping dismantling
Stainless steel off cuts 10mm.
Maize starch is a very dynamic product that assists in various types of food production. It has multiple applications to achieve various effects. Our food-grade products comply with the most stringent hygiene standards during both production and packaging. Maize starch can be used to: - Thicken soups and sauces. - Achieve a super crispy crust coat in fried foods. - Add structure to cakes and pastries - provide freeze-thaw stability and retrogradation of frozen and bottled foods - enable flavor encapsulation helping preserve food flavors for longer - control syneresis and enhance the thickness of yogurts and creams - enhance the mouthfeel of a wide range of fresh and canned foods Small changes to its specifications can enable this native starch to fulfill your culinary needs: our sales team would be
Cationic starch carries a positive charge over the entire pH range creating their affinity towards negatively charged substrates, such as cellulose, pulp and some synthetic fibres, aqueous suspensions of minerals and slimes and biologically active macromolecules. This starch may be derived from either maize or tapioca is used primarily as a wet-end starch and mainly used in paper and cardboard forming processes: -Increases mechanical strength and for better retention of fines and fillers -Enables faster drainage and improved sheet formation and production, saving both time and resources. -Improves opacity, brightness and stiffness of paper and allows for better printing quality -It is also popularly used in the manufacture of disposable diapers (nappies) and personal sanitary products. Parameters BiCAT: -Appearance - fine free flowing white powder -pH of 10% Slurry - 6.0- 8.0 -Moisture Max -13.0 % -Viscosity in Brookfield Viscometer -Min 300 cps -Brightness - Min 85.0 % -Degree of Substitution - 0.02-0.04 % -Cold Water Solubility -Max 4.0 %.
Our Cold Pasting Gum Powder possesses a consistent viscosity, excellent adhesive property, high strength film property, best tackiness, is fast drying and available in a wide range of water solubilities. This product is highly appreciated for its purity, high effectiveness, precise pH value, and long shelf life. This is a type of pasting powder which is primarily used for imparting superior stiffness and strength to laminated boards and considered as an ideal choice for making corrugated sheets. -Applications: -Labels (Regular and Waterproof) -Used in Carton Board and Corrugated Boxes Manufacturing -Wood Adhesives -Paper Sacks -Stamps, book bindings, envelopes -Parameters BiPAS:�?� -Appearance -Free Flowing , off white Powder -pH of 10% Slurry - 8-11 -Moisture - Maximum 10% -Viscosity in B4 Cup [1:6] 28-32 Seconds
Our A grade maize starch meets the highest standards and is a versatile product that can be applied across a variety of industries such as: Textiles (sizing, finishing, printing) Paper and cardboard Glues and Adhesives Rubber and foam Paint fillers and putty Cosmetics Detergents Aluminium and Cast-Iron Foundries Fireworks Dry battery cell This multifunctional product can be modified to your needs and our sales team would be more than happy to help you find the starch that fits your industrial requirements. -Parameters : -Appearance-Free Flowing Cream-White Powder -pH of 10%- Slurry 4.5 - 7.0 -Moisture Content- Max 13.0% -Viscosity of 5% solution in Brookfield viscometer at 75C- Min 1400 Cps -Viscosity of 2% solution in RedWood No.1 viscometer at 75C -Min 34 sec -Fibre Content(100gram) -Max 1.0 ml -Sieve retention on 100 mesh -Max 1.0% -Ash Content- Max 0.2% -Sulphur Dioxide- Max 100 ppm -Brightness -Max 90.0% -Protein Content Max 0.45% -Free Acidity (10 gram)- Max 4.0 ml -Petroleum Extractable Matter- Max 0.25% -Acid Insoluble Ask- Max 0.05% -Alcoholic Acidity @90% Alcohol- Max 2.0 ml -Starch content- Min 98.0%
Manufactured by addition of acid to a native starch slurry, this popular textile starch has low and uniform viscosity, which allows it to withstand high temperatures and to be used in higher concentrations. This starch may also be used in paper manufacturing for sizing and strength. Our sales team can guide you towards finding the best specifications for this purpose. -Brightness- Min 90% -Cold water solubility Max 4% -Ash Content Max 1%
