Buyer is interested to receive quotations for the following RFQ -
Product Name: Leather Cigar Case
Specifications:
Size: 7 x 3.6 x 1.4 in
Season: Fall
Room Space Selection: Support
Quantity Required : 1 Twenty-Foot Container(sample)
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Ammar Tarawneh
Knitted fitted bed sheets, knitted duvet covers, knitted pillowcases, terry towels, bathrobes, bathmats
Bed sets, cotton bed sheet, cotton pillow cover, cotton quilt
Buyer is interested to receive quotations for the following RFQ -
Product : Methanol Ch3oh, Purity 99%
Specifications:
General Specification For Methanol (CHaOH), covering its physical, chemical, and purity standards. These specifications are commonly used in industrial, laboratory, and commercial contexts:
1. General Properties
Chemical Formula: CHOH
Molecular Weight: 32.04 g/mol
Appearance: Colorless, clear liquid
Odor: Slightly alcoholic
Boiling Point: ~64.7 °C
Freezing Point: ~-97.6°C
Density (@20 °C): 0.791 - 0.793 g/cm³
pH: Neutral (~7 at 20 °C)
2. Purity
Methanol Content: 99.85% (or as per grade, such as 99.9% for high-purity applications)
Water Content: 0.1% or 1000 ppm (measured by Karl Fischer Titration)
Ethanol: 0.001%
Carbonyl Compounds (as CHCHO): 0.002%
Total Acidity (as HCOOH): 0.003%
Chloride (Clâ): 0.5 ppm
Iron (Fe): 0.1 ppm
3. Physical Characteristics
Color (Pt-Co): 5 (very low color intensity)
Refractive Index (@20 °C): 1.3284 - 1.3290
Vapor Pressure (@20 °C): ~13 kPa
Specific Gravity (@20 °C): 0.791 - 0.793
4. Impurities and Residentials
Residue on Evaporation: 0.001%
Sulphate (SO²»): 0.5 ppm
Heavy Metals (as Pb): 0.1 ppm
5. Grades and Standards
Methanol is classified into different grades based on its purity and intended application:
1. Industrial Grade: Used in fuel, solvents, and biodiesel production.
2. Lab Grade: For analytical and research purposes.
3. Pharmaceutical Grade: Meets strict purity requirements for use in medicine and drug synthesis.
Common specifications are standardized by organizations like:
ASTM: D1152 for methanol purity in industrial applications.
ISO Standards: For international compliance and quality.
6. Applications
Methanol is widely used in:
Chemical Industry: To produce formaldehyde, acetic acid, and other derivatives.
Energy Sector: As a fuel additive, biodiesel component, and hydrogen carrier for fuel cells.
Solvents: In paints, coatings, and cleaning products.
Automotive: Antifreeze and windshield washer fluids.
If you need a specific specification (e.g., ASTM D1152 or ISO 22241), I can provide more detailed information. Let me know your use case or industry!
NOTE: NEED ORIGIN FROM SELLER
Quantity:40,000 tons x 12 months
Quantity Required : 40000 Ton/Tons
Shipping Terms : CIF
Destination Port : Izmit Port, Turkey
Payment Terms : SBLC by mt760, non-transferable, irrevocable, and payment is via MT103/TT upon arrival of each shipment at the port of discharge.
Looking for suppliers from : Worldwide
Contact : Abdullah Allobani
HD media players and full HD multi media players, wireless mouse
Please quote for the following wholesale product requirement -
Product Name : Home And Hotel Textiles Items
Specifications :
Type : Bed Sheet
Duvet Filling
Pillow
Pillow Case
Duvet Cover
Bath Towel
Hand Towel
Face Towel
Bath Mat
Bathrobe
Pool Towel
Quantity Required : MOQ
Shipping Terms : CNF
Destination Port : Aqaba Port, Jordan
Payment Terms : To be Discussed
Looking for suppliers from : India, China, Taiwan, Pakistan, Egypt
Contact : Sief Addeen Freitekh
Duvet blankets, blanket, comforters, duvet, quilts
Please quote for the following wholesale product requirement -
Product Name : Soya Sauce
Specifications:
kikioman Soya Sauce Less Sodium AND Normal
Quantity : 250 tins of 18 Liters
Quantity Required : 250 Case/Cases
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Wesam Abo Jreas
Please provide a quotation to the following requirement from importer -
Product Name: Coconut Shell Charcoal
Specifications:
Must be well cooked and free from moisture. Clean from dust and debris
Quantity. MOQ We buy all year round. Number of containers in each shipment
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Aqaba Port, Jordan
Payment Terms : Maybe direct in case of visiting the seller's site or authorized transportation according to the agreement and terms/tp be discussed
Looking for suppliers from : Worldwide
Contact : Shadi Abdoeleh Abdo Al Sh
The buyer would like to receive quotations for -
Product Name: Wheat Bran
Specifications :
A. Commodity: Wheat Bran
B. Origin: USA, Brazil, South Africa, or any oTher country
C. Total Quantity: 1,200,150 MT
D. Trial Quantity: 150 MT, For Preliminary Stage Only That We Can Check The Quality And Rate
E. Monthly Quantity: 100,000 MT
F. Contract Period: 13 Month
G. Packing: PP Bags
H. Delivery Time: 14 Days Destination Free Period At The Destination Port
I. Production And Expiry Dates, Country Of Origin To Be Marked On Each Bag And Invice Must Cirtify This Or Else Seller To Bear The Penalty From Customs.
J. Price: TBD USD/MT.
K. Payment terms: 100% TT/Cash against delivery, OR, 100% LC/DLC/SBLC non-transferable, non-devisable, irrevocable paid for each shipment against original Bill Of Ladding for that shipment,
L. Destination: CFR, Salalah Port, Oman,
M. Certification: SGS,
N. Documents: Commercial Invoice, Certificate Of Origin, Phytosanitary Certificate, Packing List, Fumigation Certificate.
O. Shipping Line Will Be On The Suppliers Account,
P. Technical Specifications (The Specifications Strictly To Be Met And In Case Of Any Deviation We Reserve The Right To Reject The Goods):
- Moisture: 10% Max
- Protein: 15% Min
- Fiber: 7% Max
- ADF: 14% Max
- NDF: 43% Max
- FAT: 3% Min
- ASH: 4% Max
Quantity Required : 150 Metric Ton/Metric Tons
Shipping Terms : CFR
Destination Port : Salalah Port, Oman
Payment Terms : 100% TT/Cash against delivery, OR, 100% LC/DLC/SBLC non-transferable, non-devisable, irrevocable paid for each shipment against original Bill Of Ladding for that shipment,
Looking for suppliers from : Worldwide
Contact : Yusuf Rousan
The buyer would like to receive quotations for -
Product Name: Ro Water Purifier
Specifications:
Outer casing: polystyrene
Material: Granular Activated Carbon
Quantity : MOQ
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Ahmad Awad Allah
The buyer would like to receive quotations for -
Product Name: Ro Water Purifier
Specifications :
Outer Casing: Polystyrene
Material: Granular Activated Carbon
Malaysian Or Thai Industry
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C Or T/T
Looking for suppliers from : Malaysia, Thailand
Contact : Ahmad Awad Allah
Please provide a quotation to the following requirement from importer -
Product Name: Ro Water Purifier
Specifications:
Outer casing: polystyrene
Material: Granular Activated Carbon
Quantity : MOQ
Quantity Required : MOQ
Shipping Terms : CIF/FOB
Destination Port : Jordan, Jordan
Payment Terms : TT
Looking for suppliers from : Worldwide
Contact : -Ahmad Awad Allah
Please quote for the following wholesale product requirement -
Product Name: Nickel Cadmium Battery
Specifications:
Type: KPX 170AH Ni-Cd Battery
Maintenance Type: Low Rate
Voltage: 1.2v
Quantity Required: 16 Sets Each With Capacity Of 120 Ampere Hours (AH)
Each Set Shall Be Supplied Complete With All Needed Accessories.
16 Set of suitable steel stands for the required NI-CD Batteries
16 sheets fuse boxes (Fuse Rate: 63 Ampere)
5 Sets Of Installation And Maintenance Tool Kits (Hydrometer, Thermometer ) And Personal Safety Tools.
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms : L/C
Looking for suppliers from : Worldwide
Contact : Marah Yousef
Electical & electronic products, food grains, sugar, textile, herbal cosmetic products, computor hardware, cdr, dvd r, coils for electric generators
Please provide a quotation to the following requirement from importer -
Product Name: Sprayers
Specifications:
Maximum Weight Of The Unit: 20 Kg
Equipped With A Handle To Enable It To Be Carried
Safely When Not In Use
Technical Specifications:
Tank
Tank Material: moulded
Polyethylene
Uv Stabilized
Tank Capacity: 15 Liters
Fitted With Inlet Strainer
Visible Sight Level For Liquid Content
Approximate Calibration In Litres Indicated On
Tank Body
Pump
Pump Type: lever
Operated Piston Type
Lever Mechanism Interchangeable Left/right Side
Operation Of Pump
Pump Fitted With Either: adjustable Pressure
Regulator 1-3 Bar Pressure Setting
Or: two Spray
Management Valves (1 Bar, 3 Bar)
Reinforced Transparent Delivery Hose
Hand Lance With Trigger Operated Delivery Valve
And Inline Filter
Fitted With A lock-off Facility For Trigger
Interchangeable Nozzles, Iso Standard, Non-
Adjustable, Two Each -
Suitable For Insecticide Application (hollow
Cone Or Flat Fan)
Suitable For Herbicide Application (deflector
Or Flat Fan)
Harness / Belt
Adjustable For Size Of Operator With Waist Belt
Non-absorbent, Washable Material, Load Bearing
Parts 50 Mm
Compliance With International Standards
Operators Hand Book (printed Or In Cd) In English
Or Arabic, One For Each Unit
The Cost Of The Manuals Should Be Included
Dap/dat Cost Of The Equipment
A List Of Manufacturers Recommended Spare
Parts, Sufficient For 2 Years Of Operation Must Be
Submitted For Each Unit. The List Must Be
Itemised, Costed And Submitted With Your Bid.
Spare Parts To Be Packaged As A Set With Each
Sprayer
State The Percentage Of Spare Parts Being Offered'
Quantity Required : 9500 Piece/Pieces
Shipping Terms : FOB
Destination Port : Aswp, Other-Not Shown
Payment Terms : LC
Looking for suppliers from : India, Turkey
Contact : Read Mustafa Hasan
The buyer would like to receive quotations for -
Product Name: Frozen Chicken
Specifications :
Chicken Wings (50%MJW+50%DRummettes)
Grade: A Export Certified, USDA Approved Plant. Approved for Canada. Split MJW adn Drumettes. Natural Proportion. Wing tips Removed, IQF.
Size Between 5 And 7 Units Per Pount. Between 6 And 8 Units Per Pound
Packaging Terms : In Frozen Packs50% Mjw+50% Drumettes In A Case. Boxes Of 40 Pounds, Packaged In 8 Bags Of 5 Pounds Or 4 Bags Of 10 Pounds
Quantity Required : 2 Twenty-Foot Container
Shipping Terms : DAP
Destination Port : Varennes, Quebec, Canada
Payment Terms : L/C or CAD
Looking for suppliers from : Worldwide
Contact : Ahmed Musleh
Please provide a quotation to the following requirement from importer -
Product Name : Steel Billets
Specifications
Dimensions and tolerances:
Cross section dimensions: 130 * 130 mm2
Length 11.85 0.10 m
Rhomboidity 2.5
Mn/S More Than 25
(S + P) 0.08%
Grade 4 SP
Important Note : in case of final confirmation & order please take into your consideration that any quantity received with non-conformity shall not exceed 2.5% and our measuring tools are to be reliable for tests upon arrival.
Quantity Required : 3000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : Aqaba, Jordan
Payment Terms : LC
Looking for suppliers from : Worldwide
Contact : Heba Moqanasa
Please quote for the following wholesale product requirement -
Product Name: Pipe Base Well Screen
Specifications:
1- 16 O.D - 57.5 lb/ft, API carbon steel casing in (20) foot lengths, perforated with 716 diameter holes' perforation, with 304 stainless steel ribbed screen having No. 15 slot opening (0.015) Perforation and ribbed screen shall start two feet away from the collar, and one foot away from threaded end. with L.T.C coupling, QTY = 400 METERS
2- 13 O.D. 48.00 lb/ft pipe screen as above (Item 1), QTY = 400 Meters
prices must be on the basis of CFR Aqaba port
- Validity: prices must be valid for 30 days
- Must send technical data sheet, drawing, ISO, MTC, API certificates, manufacturer name & origin
Quantity Required : MOQ
Shipping Terms : CFR
Destination Port : Jordan
Payment Terms : 100% L/C at sight
Looking for suppliers from : Worldwide
Contact : Said Alkam
The buyer would like to receive quotations for -
Product Name: Calibration And Metering Equipment
Specifications:
1: Long range Indicator calibrator
Indicator calibrator optimar 25 with digital readout.
Application: for both analog dial indicator, dial comparator, level type test indicators & digital indicators.
Measuring range: 25mm
Resolution: 0,1um (0.0001mm)
Accuracy: 0+/- 0.2um
Power Supply: (220-240 VAC), 50Hz
Long clearly readable LCD monochrome digital display.
Selectable for either Metric or Inch
Output: USB interface for PC, RS232 Interface
Inspection Program: QN Software/dial – 32 with laptop and printer
Accessories: all operational accessories
Footswitch for data transfer supplied with calibration certificate issued by a laboratory accredited (including the calibration error and uncertainty)
List#4 Standard Glass Scale
High precision glass scale
Accuracy: 0.005mm
Line width: 0.005mm
Measuring range: (0-300mm)
Wooden Case
Calibration Certificate from national metrology institute (NMI)(VSL, PTB, NPL)
List#5 CERA Caliper Checker
Specification:
Wrung high-grade CERA gage blocks in a protective casting
Range: 0-600mm
Accuracy of block pitch: +/-0.005mm
Parallelism of block pitch: 0.005mm
Calibraton Certificate from accredited lab.
List #6 measuring tape and rule calibrator
Calibration unit for checking scales rule and measuring tapes with 0.001 mm resolution
Clamping range: upto 2000mm,
Drawer load range: 20n – 50N
Measurement uncertainty: ((0.05)^2 + (0.005L)^2)^0.5 where L: M
The instrument should be supplied with the required computer, software and accs.
Supplied with calibration certificate from national metrology institute (UME, vsl, or NPL)
List#8 Standard Thickness Foil
Standard block for calibration coating thkness gauge.
Range: (from 0.001 – 1)mm
Calibration certificate from accredited lab.
List #9 Precision Electronic Level
Wireless talyvel 6 electronic precession
Level flatness measurement with PC and Software
Measuring range: 1600s
Resolution: 0.1 arc-sec
Accuracy: +/-0.2sec
Power: 220VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List# 10 Small angle Generator
Used for calibration of angle measurement device (sprit level, electronic levels and autocollimators)
with software and PC
Range 1m SAG
Uncertainty measurement = 1 arc second.
Power: 220 VAC 50Hz
Calibration Certificate from national metrology institute NMI metrology
List #11 Handheld, calibrator (process calibrator with portable pressure calibrator)
Measurement and electrical pressure generation at the touch of a button with integrated pump
From -0.8..+20bar (11.6..+290psi)
Accuracy: 0.025% of reading +/- 0.01% FS(including calibration certificate)
Generation/measurement of 4…20mA, 24V voltage supply to power transmitter
Pressure supply via external compressed air-line
With calibration certificate from national accredited lab.
List# 12 Process Calibrator
With Hydraulic handheld pressure with integrated medium reservoir & ergonomic handling
With hydraulic hand spindle pump with function for calibration & pressure switch test
Range: 0-1000 bar
Accuracy: 0.05% FS
Medium: non-corrosive gases, liquids, water
With complete 4 test and service cases
With refence pressure sensor (interchangeable without tools) 1.2m
With Calibration Certificate from national accredited lab
List #13 mechanical vacuum pump
Minus 1bar (220V 50Hz)
With Calibration Certificate from nationally accredited lab
List #14 High Performance Pressure Generation and Control 200MPa PPCH
Precision: to 0.003% of Q-RPT span.
Volume: 0-100cc, 50cc optimum, operated in larger volumes but pressure stabilizing time increases
Dynamic Mode typical time to ready
180sec into a 50cc volume & 20% FS excursions with default hold-limits 1.0 MPa (150psi) (lower in optimum conditions and with PG7302.
RS232 Cable, 9-in 2m for PPC3 COM1 or PPC3 to RPM4 connection
Quantity Required : MOQ
Shipping Terms : CIF
Destination Port : Jordan
Payment Terms :
