The system vaporizes liquid ammonia, and heats it with a catalyst until decomposition occurs, creating a mixture of gas consisting of 75% hydrogen and 25% nitrogen. Based on the principle that the molecular sieve adsorbs ammonia and water at different temperatures, high purity gas is produced by heat regenerating through the mixture working at normal temperature.Hydrogen production
5-500nm3/h
Methanol is converted to co and h2 with the action of the catalyst;
-co and h2o are converted to co2 and h2 with the action of the catalyst;
-co2 and trace co are separated from the decomposed gases by psa technology, and high purity of h2 is generated.
This separation process occurs in an adsorption tower and is advantageous in its low cost, low capacity, minimal maintenance requirements and user-friendly interface. The h2 purifying system removes oxygen from hydrogen via a catalyst to obtain high purity h2 after adsorption and drying through the dust filter. The system can remove oxygen down to levels of 1ppm. Through one step of purification, the purity of the hydrogen generated can reach between 99.999~99.9999% and the dew point can be lower than -70°c; through a second purification step, impurities can be
, 0.8mpa
Introduction:
Hydrogen electrolyte and oxygen electrolyte circulate separately, hydrogen electrolyte pumps into hydrogen fuel cell directly and oxygen electrolyte pumps into oxygen cell directly, and therefore gets higher purity of hydrogen and oxygen gas.
Specifications:
O2 purity % >99.5
Power consumption (dc) < 4.5 kw.H/m3h2
Electrolyte 30% koh
Work pressure 0.5-5.0mpa
2145 Power Plants Suppliers
Short on time? Let Power Plants sellers contact you.
Ntm engineering proposes designing gas turbine power plants of small, medium and large capacity. We carry our research, development and engineering projects under the terms of the order of the customer, provide the necessary technical documentation, offer new development, technologies, innovations in energy industry. Ntm engineering combines human talents and modern software technologies to create r&d projects quality and timely. Our high qualified specialists have a large experience in energy industry.
We would like to inform to you that we are planning to sale complete plant equipment and machinery of our 6mw 5°c
6 mw turbo-generator (triveni make f r -13)
Power :6000
Year of manufacturing:2003
I / l steam pressure :65 kg/cm²
I / l steam temperature :485°c
Exhaust steam pressure :01 kg/cm²/ata
Bleed steam pressure :3.5 kg/cm²
Turbine speed :8280 rpm
Out put speed :1500 rpm
Trip speed range :9145 to 560 rpm
1st critical speed:3200 to 3600 rpm
Oil :Servo prime-68
Triveni gear box
Model no.:0560
Gear ratio :5.52
Rated input :8280 rpm
Order no.:3730
No. Of teeth gr/pin :138 / 25
Oil :Iso vg-46
Bhel generator
Frame :G651048
K.V.A:7500
Kw :6000
Rpm:1500
P.F :0.8 lag
Stator volts :11000
Stator amps :394
Exct volts :122
Exct amps :387
Synchronous generation
Connection :Star
Inlet temperature :50 °c
Ambient temperature :40 °c
2. Circulating fluidized bed boiler is radically different from other boilers on the burning system. Its burning system consists of burning room, material destination and material returner. The high heat material enters the material returner together with the airflow, and the material collected will enter the material returner and then returns the burning room. This is called circulating burning which increase the burning efficiency greatly.
3. This boiler is with a wide range and high speed of load adjustment.
4. A clean and environmental burning technology is used in this boiler to improve the quality of air and environment.
5. It is easier to use the ash completely because of the low-heat burning and good burning condition of this boiler.
6. There is no immersed tube in the boiler, so it is easy to start or stop the equipment
We can be specially designed and manufactured by different output powers for hydro power stations according to different dam site conditions and environments.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Technical Parameter for 100kw downdraft biomass gasifier gasification power plant
1. Power Plant Scale: 100kw
2. Engine & Generator Type: gas engine and generator using 100% biomass gas as fuel
3. Rotary speed of engine: 1000Rpm
4. Gasifier Type: Fixed bed downdraft biomass gasifier
5. Gasifier Gas Output: 375Nm3/hr
6. Gasification Agent: Air
7. Gasifier Outlet Gas Temperature: 700-800 degree
8. Gas temperature after Cooling: Below 45 degree
9. Biomass Fuel Consumption: 200-220KG/Hr
10. Biomass gas heat value: Normally 3000-6000KJ/Nm3
11. Application: for power generation or for thermal application
12. Site area requirement: about 50 square meters.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.
Biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua, wood waste and residua, nut shell, other waste and residua.
1. Power Plant Scale: 200kw
2. Engine & Generator Type: gas engine and generator using 100% biomass gas as fuel
3. Rotary speed of engine: 1500Rpm
4. Gasifier Type: Fixed bed downdraft biomass gasifier
5. Gasifier Gas Output: 750Nm3/hr
6. Gasification Agent: Air
7. Gasifier Outlet Gas Temperature: 700-800 degree
8. Gas temperature after Cooling: Below 45 degree
9. Biomass Fuel Consumption: 400-440KG/Hr
10. Biomass gas heat value: Normally 3000-6000KJ/Nm3
11. Application: for power generation or for thermal application
12. Site area requirement: about 90 square meters.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua,Wood waste and residua,Nut shel,Other waste and residua.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.
Technical Parameter for 400kw biomass gasifier - biomass gasification power plant
1. Gasifier Type: Fluidized bed biomass gasifier
2. Gasifier Gas Output: 1500Nm3/hr
3. Gasification Agent: Air
4. Biomass Fuel Consumption: 520-720KG/Hr
5. Biomass gas heat value: Normally 3000-6000KJ/Nm3
6. Application: for power generation or for thermal application.
The biomass gasifier and biomass gasification power plant we supply here is using 100% agricultural and forest waste as fuel. The biomass gasifier (reactor) can convert the above mentioned biomass fuel into syngas for thermal application and power generation. The company has developed and commercialized a wide range of biomass gasifier ranging from 50kw output to 1200kw output. The biomass gasifier and gasification system is applied to biomass power generation plant, biomass centralized gas supply for cooking and heating. The biomass gasifier and biomass gasification system can also be applied to replacing LNG and diesel oil for thermal application and baking & drying agricultural products. Our equipments have been serving in rice mill, timber mill, food industry (especially nuts), village, and Tobacco Company safely and reliably. Both downdraft fixed bed gasifier and fluidizedbed gasifier is available. If customers have special requirements, unique design, manufacture and delivery can be made on your demand.
Applicable Fuel for biomass gasifier gasification system:
Agricultural waste and residua,Wood waste and residua,Nut shel,Other waste and residua.
The whole gasification process is environment-friendly with low NOx in the engine exhaust and nearly no sulfur oxide emission (SOx). H2S is very less, which usually can be ignored.Welcome to contact with us for more information.
Technical Parameter for1200kw biomass gasifier - biomass gasification power plant
1. Gasifier Type: Fluidized bed biomass gasifier
2. Gasifier Gas Output: 4500Nm3/hr
3. Gasification Agent: Air
4. Biomass Fuel Consumption: 1.8-2.2Ton/Hr
5. Biomass gas heat value: Normally 3000-6000KJ/Nm3
6. Application: for power generation or for thermal application.
The recovery plant is specially designed to recover CO2 from fermentation processes at breweries. This complete CO2 plant was installed in 2001 and it has nominal CO2 removal capacity of 1000 kg/h. The plant has Siemens S 7 control system where operation is carried our via a large 12 " color screen panel with Windows CE operating system. This is a complete CO2 recovery plant and final delivery scope depends on buyers needs. The plant has been in operation only approx 5 years and is still installed and in very good condition. The carbon dioxide plants was designed by Danish Union Engineering (www.union.dk ) and the delivery includes following main components:
- 1 Scrubber for gas flushing
- 2 Foam catcher vessels
- CO2 collection, inflammable
- 2 Mehrer TZW 70 CO2 compressors
- 2 Carbon filters
- 2 Dehydrators
- CO2 Liquefier
- CO2 Storage Tank
- 2 Cooling compressors GEA Grasso GD-3 for R717
- Air cooled condenser for NH2 compressors
- Alarm center for CO2 and NH3 concentration
- Station for 40 kg CO2 still tank filling
- CO2 pumping station from a truck to the factory
- CO2 purification tester
- Steam heated evaporator for liquid CO2
Detailed technical information available for serious buyers
Manufacturer pompetravaini italy, made in year 2002. Vacuum pump is two staged rotating pump with externally located, grease lubricated bearings. Pump is liquid ring type designed for water sealed operation. The impeller and shaft are made of stainless steel (aisi 316), cast iron casing and manifold normal steel. The shaft is sealed with double mechanical seal. Pump is provided with connections for service water and draining. Pump includes also anticavitation valve. Pump is dismantled from its base frame but the delivery includes original electric motor eex classified abb hyr 200m lb 4 30 kw, 1476 rpm, year 1995. The equipment will be supplied loose - not as a skid.
Technical data:trch 80 - 540/c2/ra
Max suction pressure:25 mbar (till 300mbar)
Max capacity:540 m3/h (min 400 m3/h)
Flanges:80 mm
Rotation speed:1500 rpm
Power requirement:30 kw at 1500 rpm
Year made:2002
Condition:fully operational
Rotary Lube Blower / Vacuum compressor KAESER EB 420 C û 38 m3/min, 53 kPa
There are two identical sets of oil-free, 2 lobe rotary blowers, made by Germand Kaeser Kompressoren GmbH in year 2005 with accessories. Manufactures type is Kaeser ED 420 Compact Omega Pluss 53 and accessories include a control cabinet with two inverters and programmable Kaeser Start Control STC 30 unit, totally 6 preliminary intake air filters and 3 final air intake filters with their steel supports. The rotary blower units have removable sound enclose for noise insulation. Operation of the equipment was stopped in year 2007, total running hours approx 7000 and therefore they are in excellent operational condition. In addition, we can offer you service maintenance by the manufacturer at separate cost.
This equipment is suitable for demanding dust collection and pneumatic transportation of various products due to oil free operation. For pneumatic transport application some changes in filters and other parts are needed.
The rotary lobe has two blower shafts with high efficiency Omega profile in a blower block. The rotary lobe and the block have a very small distance and they are not touching each other's and therefore there is no need for lubrication oil. The rotors are driven by high efficiency electric motor via belt connection and they both are installed on the same base frame. . The inlet and discharge silencers are designed to be effective at all frequencies and are eminently suited to variable speed . Higher rotational blower speeds produce high volumetric efficiencies, which in turn lower discharge temperatures and power consumption. The Compact Range ensures that all serviceable items are accessed from the front panels of enclosures.
The preliminary intake air filters are combination of cyclone and bag filter and it removes most of the dust from inlet air. Fine filter is a combination of cyclone and 138 ceramic fine filters which removes fine dust very effectively.
Technical Data
Manufacture's type: EB 420 Compact Omega plus 53
Manufactured in year: 2005
Suction capacity with max vacuum:38,0 m3/min
Power demand max: 40,3 kW
Rotor's rotation speed 4120 rpm
Max suction vacuum: 0,53 bar (abs.)
Discharge pressure: 1,0 bar (abs.)
Max pressure increase: 470 mbar
Temperature rise max -t: 82 K
Electric motor: 45 kW û 50 Hz / 400/690V û 83/48 A
Electric motor nominal speed:2965 rpm
Protection class: IP 55
Inverters: Mitsubishi FR-F740-01160-EC
Case ventilation fan: 370 W û 50 Hz / 230 / 400V
Weight blower with the case:1120 kg
Blower case main dimensions:1.8 x 1.7 x 1.8 m (K x L x S)
Noise level: 99 dB (A)
Noise level with the case: 84 dB (A).
2145 Power Plants Suppliers
Short on time? Let Power Plants sellers contact you.
