Line post insulator used on distribution line and transmission line upto 132kv. It is mounted rigidly on supporting structure by means of a steed or bolts. It is non-puncturable design.
Connected fitting type: tie top conductor binding type and clamp top with vertical or horizontal mounting.
Cantilever strength can be 5kn, 10kn, 12.5kn, 16kn.
Main type:
Ansi c29.7 type: 57-1, 57-2, 57-3, 57-4, 57-5, 57-11, 57-12, 57-13, 57-14, 57-15, 57-21, 57-22, 57-23, 57-24, 57-25, 57-31, 57-32, 57-33, 57-34, 57-35
Other type according to iec383 and bs137.
The porcelain bushings are used extensively in electrical apparatus. Porcelain bushing is the device that enables one or several conductors to pass through a partition such as a wall or tank and insulates the conductors from it. The means of attachment to the partition, such as flange or other fixing device, forms part of the bushing.
Big porcelain bushing, hollow insulator upto 1000kv:
Upside down transformer bushing
Capacity voltage transformer bushing
Sf6 current transformer bushing
Outdoor cable end bushing
Voltage transformer bushing
Current transformer bushing
Circuit breaker post bushing
Sf6 transformer bushing
Oil immersed voltage transformer bushing
Sf6 circuit breaker bushing
Electrostatic precipitator bushing
Small porcelain bushing, hollow insulators are used as the insulating elements such as the transformer bushings and wall bushings .They are designed to perform under outdoor and indoor conditions for voltage upto 36kv.
We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc.
Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 145kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting.
A sino-usa joint-venture company located at xiamen hi-tec. I.D.Z., p.R. Of china. We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc.
Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 145kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting.
816 Electric Insulators Suppliers
Short on time? Let Electric Insulators sellers contact you.
Toughened glass insulator is , up to now, not only running in china but also having been exported to oversea nearly 50 foreign counties, and has a bright future in global market.
Our products can apply wiyh iec, bs, as, ansi, and din standards ete. As well as chinese standard.
We are sincerely willing to have a cooperation in the world with all customers who come from anywere.
The main products include:
1.All kinds of overhead line insulators:high voltage disc insulator, pin insulator, cross-arm insulator, etc.
2. Station insulators: outdoor and indoor post insulator, station insulator, bushing.
Equipment:10-35kv fuse drop-off switch, 10-35kv zinc-oxde silicon arestor, and 10-35kv isolate switch.
4.Porcelain bushing.
Armaflex insulation is black, flexible, closed cell elastomeric nitrile rubber insulation providing a highly efficient method of controlling condensation and insulating against both heat loss and heat gain.
GOOT Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation material which was developed in 2006.
The VIP s are constructed using a special technique by inserting the open-celled filler into a centralized sealed barrier.
Using the core material which provides the structural strength and resistance for heat transfer makes the VIP extremely efficient in low thermal conductivity that has less than 0.005w/m.k.
The VIP has been proven to exceed its performance than the conventional insulations by far. Vacuum Insulation panels are our new high- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The core material provides the structural strength and resistance to heat transfer.
Applications:
Cold insulated equipments of different industries
Shipping containers
Spaceflight/ Aviation
Communication/ transportation
Medical Refrigerators and freezers
Marine and recreational refrigeration vehicles
Civil refrigeration equipment
Insulation for construction
Advantages:
7- 10 times better insulation value then conventional insulations
Thin wall, small volume, lightweight
Extremely low thermal conductivity 0.005w/m.k
Resistance to heat transfer among the gas molecules
Non-ODS material
Not harmful for the environment
Meets all insulating requirements
Specification:
1) Compressive Strength: 0.14MPa - 0.25MPa
2) Thickness: 10 - 35mm
3) Maximum Dimensions: 1600 x 700 x 35mm
4) Core Material: Superfine fibreglass
5) Thermal Conductivity: less than 4mw/m.k(under standard environmental condition: ambient temperature 24 C, relative humidity 50%)
6) Density: about 230kg/m3
7) Internal Pressure: 0.1Pa
8) Operating Ambient: -50 ~ 70 centi degree
9) External Tolerance of VIP: 1mm
10) Packing: carton with foam and air bubble film
11) Service life: 10-15 years under standard environmental condition
We are a leader in the design and manufacture of epoxy components for the electrical power equipment industry. We do business with the philosophy that our most important product is customer satisfaction. We are now the supplier of italian vei(xiamen), areva(xiamen), etc.
Specializing in manufacture of epoxy resin insulators, we have lots of kinds of insulators from 40.5kv to 7.2kv, such as spouts, bushings, post insulators, capacitive insulators, voltage indictors, and such special advanced components as applied on c-gis, sis, embedded poles, sf6 airproof system, etc., featured as compact design, high reliability, electric field equilibrium, for outdoor and indoor application. We has built up extensive expertise in material control, casting technology , testing ways and application data in apg ( automatic pressure gelation ) field. Also we welcome the oem business, and would like to tailor your special need all through mould design to casting.
Composite Insulator Manufacturer
Founded in 2010, Taporel Electrical (Jiangsu) Power Fitting Co., Ltd, held by Shaanxi Taporel Electrical Technology Co., Ltd. in Yangtze river delta economic belt, is a professional company specializing in R&D and manufacture of composite insulator fittings, power line fittings, and other fittings for transmission and distribution lines. It directly provides fittings for Taporel Electrical and Wishpower.
Composite Insulator Classification
According to different installation methods, insulators can be divided into suspension insulators and post insulators; according to the different insulating materials used, they can be divided into porcelain insulators, glass insulators and composite insulators (also called composite insulators). according to different voltage levels, they can be divided into Low-voltage insulators and high-voltage insulators. according to the different environmental conditions used, the pollution-resistant insulators used in polluted areas are derived; according to the different types of voltages, DC insulators are derived. there are also various special-purpose insulators, such as insulating crossarms, Semiconductor glaze insulators and tension insulators for power distribution, spool insulators and wiring insulators, etc. In addition, according to the different breakdown possibilities of insulators, it can be divided into A-type, non-breakable insulators and B-type instant-breakable insulators.
This is Victor Wang a business manager of the Dalian Tucheng International(TCI group). TCI is an important manufacturer and export trader in China, specializing insulators of all kinds for high-voltage applications and related products.
Our products are widely used in transmission & distribution lines, substations and electrical railways. We implemented the ISO 9001:2008 Quality Control and the ISO14001:2004 environmental management systems. And our composite insulator products passed the tracking and erosion test at CESI Mannheim, Germany in 2010.
Besides, we have cooperation with a lot of international electricity companies like ALSTOM,TYCO, ABB, SIEMENS, PLP and many electricity authorities overseas, such as JEPCO (400kv, Jordan), REA and KPLC (Kenya), EETC ( 500kv, Egypt)(?????) etc.. And until now our products are used in more than 100 countries in the world and the number keeps increasing.
If you have any inquiries about our products, please feel free to contact me any time.
Sincerely look forward to cooperating with you. Have a nice day.
TCI is an important manufacturer and export trader in China, specializing  insulators of all kinds for high-voltage applications and related products.
Ã?Â
Our products are widely used in transmission & distribution lines, substations and electrical railways. We implemented the ISO 9001:2008 Quality Control and the ISO14001:2004 environmental management systems. And our composite insulator products passed the tracking and erosion test at CESI Mannheim, Germany in 2010.
Besides, we have cooperation with a lot of international electricity companies like� ALSTOM,TYCO,� ABB, SIEMENS, � PLP and many electricity authorities overseas,� such as JEPCO (400kv, Jordan), REA and KPLC (Kenya), EETC ( 500kv, Egypt)� etc.. And until now our products are used in more than 100 countries in the world and the number keeps increasing.
Protart insulating mats are required for electrical protection of workers according to work safety regulations. It is made of thermoplastic elastomer (TPE) which is resistant to various oils and solvents. It is designed to be used in electrical hazardous areas such as ubstations, power stations, test laboratories, in front of machinery and electrical boards, etc. Electrical resistance is tested according to international standards.
816 Electric Insulators Suppliers
Short on time? Let Electric Insulators sellers contact you.
