1.Hardware RAID that works seamlessly between Macs and PCs.
2.The GR3660-TB3 is equipped with three configuration modes to suit every need. RAID 0/1/JBOD.
3. Thunderbolt and (USB-C) brings you 40Gbps extreme high data transfer speed.
4. GR3660-TB3 to support 2 x 3.5" / 2.5" SATA HDD/SSD.
5.Thunderbolt and The USB-C that does it all.
6. Support 15W ( 5V/3A ) Power Delivery.
7. Mini Display Port connect DVI/HDMI/VGA display devices.
8. Hardware RAID that works seamlessly between Macs and PCs
GR3660's built-in hardware RAID controller chipset and Thunderbolt and type c host interface, not only does it promise high transmission speed, it also eliminates the cross-platform usage issues associated with RAID 0 or RAID 1 setups. Also, with hardware RAID, all data is computed and processed by the built-in CPU. With such advantages, your computer performance can be focused on running the software and work, instead of handling the storage device's transmission issues.
Model No: GR3660-TB3
Interfaces: Thunderbolt Port x 2( up to 40 Gbps ), Support 15W (5V/3A) Power Delivering.
Mini Display Port: 1
Compatible Drive: 2 x 3.5" /2.5" SATA HDD/SSD ( up to 6 Gbps )
Storage Mode: 2 x Independent ( JBOD ) / RAID 0 / RAID 1
Cooling System: 4 cm Low noise fan
Operating System: Windows 7, Windows 10 or above, OS X 10.10 or above Electrical and Operating.
Requirements:
* Line voltage: 100-240V AC
* Frequency: 50Hz to 60Hz, single phase
* Operating temperature: 32° to 104° F (0° to 40° C)
* Storage temperature: -4° to 113° F (-20° to 45° C)
* Relative humidity: 5% to 95% noncondensing
Size and Weight Height: 122 mm Width: 63 mm Depth: 244 mm Weight: 1.2 kg
Product Code EAN:4713227440240
UPC:884826504429
Carton: 8 pcs per carton
Package Accessories:
* GR3660-TB3 Product Unit x1 (Removable Tray x2)
* Thunderbolt Cable x 1
* AC/DC Adapter x1
* Power Cable x 1
* Accessory kit
* Quick Installation Guide x1
CR-605 series universal liquid level gauge is suitable for measurement of sewage, oil (sheathed tube), high viscosity, easy to crystallize, easy to adhere, changeable medium , foam or aerosol impact and other diffcult to measure situation. The whole machine does not have any movable or elastic parts with advantages of impact resistance, convenient installation, high reliability, high precision and good cost performance. It can replace the RF admittance, radar, ultrasonic, magnetostrictive and other level gauges to make accurate measurements.
The core components use advanced RF capacitance sensing circuit to convert to standard electric signal after precision temperature compensate and linear correction through inner processor. The product uses tomography technology to automatically detect the dielectric constant and temperature changes of the medium, automatically calibrate, and automatically adapt to the measured medium. In any case, you can adapt to different measurement requirements in complex locations without recalibration. And it has excellent resistance to hanging materials, anti-condensation, anti-bubble and other super adaptability. The products own protection rating is IP68, which enables long-term stable measurement in harsh environments.
6040 co2 laser engraving machine 40w 4060 co2 laser engraver
Features
This machine adopts imported linear guide and dsp system control software. The machine has stable performance and applicable for different industries. It is the ideal choice for non-metal processing industry.
Dy-13 Reci Co2 Laser Power Supply for 1400mm RECI W4 100watt CO2 laser tube
Features:
1.This� DY 13� laser power supply adopts zero current and half bridge soft switch circuit, it makes the power supply have high efficiency and quick response speed. Thus it is easy to match with RECI W4 100W CO2 laser tube.
2.This� 100watt� laser power supply is easy to be controlled, it is suitable to High or Low level signal. The TTL level can control start or stop of laser output. While the power supply has emergency protection switch which can indicate water through and ventilation.
3.The laser output power� of this DY13 CO2 power supply� can be adjusted by 0-5V analog signal or PWM signal.
4.This� DY-13 CO2� laser power supply has open circuit protection function. When protective earthing is good, the laser power supplycan be in open circuit status during short time. This function can protect power supply when laser tube burst.
5.Aging test:Each laser power supply must pass this test which is taken at 60 degree centigrade for 12 hours in full load status. And the power supply must start and stop at each 7 seconds for 500 times. In this way we can ensure the laser power supply is qualified.
6. This DY-13 100W CO2 laser power supply uses ordinary H/L/P/G/IN/5V interface as laser control signal and it uses blue aluminum case.
Specification:
Input AC Voltage AC220V or AC110V
Input DC Voltage DC 300V or DC150V
Input AC Frequency 47-440Hz
Max. Output Voltage 40KV
Max. Output Current 28mA(Depends on Laser tube)
Efficiency 91%
Over Current Protection 130% of Max. Current
Open circuitProtection Yes (For short time)
Cooling Fan Cooling
Voltage Range of High Level Control Not Less Than3V
Voltage Range of Low Level Control Not More Than0.8V
Working Temperature -30 - +65 Degree Centigrade
Humidity 20-85%RH(No Dew)
Ã?Â
Withstand
Voltage Input-Output AC1500V/MinNot More Than10mA
Input-Shell AC1500V/MinNot More Than10mA
Output-Shell Connected
Insulation Not Less Than 50MOHM(DC500V)
Leakage Current Not Less Than 1mA(AC220V)Not More Than 0.5 mA(AC110V)
Shock Resistance Amplitude: 0.5mm, Frequecy:10-55Hz, 3D Dretion:2 Hours
MTBF Not Less Than30,000hours
Full Load 60 Degree Centigrade test 12Hours
7 Seconds Start/Stop Test 500 Times
Dimension(LXWXH) 270x160x80mm
HANDLE SWITCH QSA160-400
Sold by YOYIK. Deyang YOYIK is a professional production, development, sale of power plant dedicated spare parts and accessories processing company. Through more than 21 years of efforts, the majority of customers have been fully recognized.
Yoyik can offer many spare parts for power plants as below:
#DF-HANDLE SWITCH QSA160-400-DF
Zero speed sensor XD-TD-1
linear measurement transducers 5000TDZ-A
Differential pressure switch RC0373020912
Speed sensor CS-1G-D-100-05-01
Electric actuator D047H000V004
PLC SPEED MODULE HY-6000VE731
boiler heating element RJ-14.5-140
Hydrogen leakage detection transmitter LH1500-C
Current transformer FPVDH-A9-03
Proximitor 5300-11-050-03-01
ID Fan Inlet/Outlet Temperature Element WZPM2-001S
eddy current proximity sensor working CWY-DO-810500-50-04-02-02
NEPM meter KV
Flame detection probe 2653-093-03
Anti-interference relay UEGH/F-4DPDT
Pulse forming module ADAM-5081S
sensor Difrential Expantion TM0120-A01-B00-C06-D50s
Flame detection probe EFD-â?¡-B-2
pressure switch cost BPSN4KB25XFSP12
Eddy Current Sensor PR6422/003-031
Coal flow sensor XD-TH-2
Bolt electric heating rod ZJ-18-730
Mass Flow Controller DF6101-005-065-01-09-00-00
Eddy Current Sensor PR6422/002-040
Motor protection circuit breaker PKZMC-6.34.06.3A
Sensor LVDT For GV (Governor Valve) TDZ-1E-32 0-100
Boiler electrode rod DJY2612-115
Expansion transducer TD-2-02
Eddy Current Sensor PR6423/000-140
LVDT Position sensor DET25A
PS Board CS057210P
Oil Tank Level Meter 242YR71-0
Auxiliary power PSMU-1-5V/30W
Drive sharft(Upper part connected to reducer) SR-106V
Temperature and humidity controller THS-Y/OLED
Signal conversion board DF-KTVI-10204
HANDLE SWITCH QSA160-400
Electronic weight indicator kit
Compact and rugged instrument designed for any type of weight, force measurement application, to operate under any type of conditions.
It is very simple to use and operate and is very user friendly.
It is ideal for tabletop scales, weigh platforms, crane scales, conversion kits, weigh bridges, milk weigh bowls, tank-weighing systems, check weighers, packaging machines, bagging machines
Apart from weighing related applications, it can also be used for force measurement applications such as in universal testing machines, spring testing machines, dynamometers, presses (mechanical, hydraulic or pneumatic)
Its prominent features are -
+ Full software calibration
+ Provision for extra display
+ Provision for battery back-up
+ Provision for various options such as rs232 / rs485 output, printer output, two set points
+ Options of Class 2, 3, 4 or dual range
General technical specifications:
-Load cell excitation: ¦ 5V DC
-Load cell drive capacity: 1 no. 350 W load cells (6 nos. optional)
-Load cell connection: 4 wire or 6 wire
-Input signal range: 0 to 30 mV
-Sampling rate: 4 per second
-Internal resolution: 40,000 counts
-Display resolution: 1,000 to 15,000 counts
-Accuracy class: Acc. To IS:9281 Class II, III, IV or dual range
-Non- linearity: +/- 0.05 % of F.S.
-Zero temperature co-efficient: +/- 0.01% RO/¦C/h
-Span temperature co-efficient: +/- 0.01% RO/¦C/h
-Drift of no-load output with temperature: +/- 0.05%
-Drift of no-load output after 1 hour: +/- 0.15%
-Drift of full scale output after 1 hour: +/- 0.01%
Calibration:
Full digital software calibration through keyboard (also possible through PC keyboard with MODbus protocol)
Weight display:
5 digit 7 segment LED 12.7mm with negative sign
Indications:
Tare, Gross & Set points, through LEDs
Keys:
Micro keys (sealed membrane keyboard optional)
Operating temperature range: 0 ¦C to +50 ¦C
Storage temperature range: -10 ¦C to +70 ¦ C
Operating voltage: 230 VAC +10%, 50 Hz (Optional - 110V AC, 12 VDC)
Specification:
1.Supply voltage: loop power 18~32 vdc
2.Dcv input: 0~500 mv/ 0~1v/ 0~5v/ 0~10v/ 0~20v
3.Dca input: 0~20 ma/ 4~20 ma
4.Thermocouple input: k / j / t / e / r / s / b / n
5.Rtd/ resistance input: pt100/0~400w
6.Analog output: 4~20 ma (loop power)
7.Ambient temperature: -20~60c
8.Communication: hart
9.Galvanic isolation: 1500v
Feature:
1.Isolation voltage: 1500 vac
2.Loop power 12~32vdc
3.Linear current output
4.Lcd display with 3 press buttons
5.Universal type with multi-signal input
6.With communication port for programming
7.Optional: hart
Woven wire cloth screen sections filter cloth, Square mesh: Plain weave, Square mesh: twilled weave. Precrimpedwire screens : double intermediate crimp screen,
Filter cloth: Oblong mesh, EGla - 5, HIFLO High Capacity filter weave, SPW single plain Dutch weave, RPD Reverse plain Dutch weave, DTW Dutch Twilled weave, BMT Broad mesh Twilled Dutch weave.
Details required for wire cloth order
1. Quantity: number of pieces and / or in rolls.
2. Dimensions: Length & Width of pieces and / or In Rolls.
3. Material of construction,
4. Aperture Width - W, mesh count (Per Linear inch) or number of meshes per CM2 may like wise be stated instead of the Apreture Width,
5. Wire Diameter
6. Type of Weaves: If necessary, 7. shaped parts or filters: Provide sample, Sketches or drawings preferably with permissible tolerances.
Gauge pressure sensor with dual in-line package is a small size piezo-resistive pressure sensor. When the input voltage is 3vdc the sensor produces mv dc output voltage which is direct proportion of the input pressure. All the products can be customized according to your requirement.
Features
Solid-state reliability
Low cost
Gauge pressure type:0-40kpa;
Easy to use
Applications
Medical instrumentation & monitoring
Digital blood pressure meter
Environmental monitoring
Consumer & sports
Pressure type
Type
Gauge
Psg010
Gauge
Psg010r
Gauge
Psg010s
Min Typ Max Unit Remarks
Excitation voltage 5.0 V
Excitation current 1 Ma
Span
(fs rang) 40kpa 50 65 80 Mv
Offset -25 0 +25 Mv
Tc span -24 -19 -15.5 %fs/100 celcius Measured at 5v constant voltage excitation.
Tc offset -7 +7 %fs/100 celcius
Tcr +18 +25 +32 % /100
Linearity -0.45 -0.15 +0.45 %fs
Bridge impedance 4.5 5 5.5 K|¸
Proof pressure 2x Fs
Burst pressure 4x Fs
Operating temperature -20 +80 Celcius
Storage temperature ,
The series of pressure sensor is a small size piezo-resistive pressure sensor. The die size is 1x1mm2. When the input voltage is 3vdc the sensor produces mv dc output voltage which is direct proportion of the input pressure. Pressure sensor is the absolute pressure sensor, and we can also offer the differential pressure mode. All the products can be customized according to your requirement.
Features
Solid, mems technique, high reliability
Low cost, tiny size,-1700kpa
Nonlinearity: < 0.20%fso
Silicon/silicon bonding wafer, high stability
Application
For high resolution absolute sensor systems
Engine control
Tire gauge
Barometers, altimeters, variometers, sphygmomanometer
Min Typ Max Unit Remarks
Excitation voltage 5.0 V
Excitation current 1 Ma
Span
Fs rang 100kpa 50 70 90 Mv 1
150kpa,
200kpa,
350kpa,
700kpa,
1000kpa 80 120 180 Mv
1.7mpa 100 150 200 Mv
Offset -35 35 Mv 2
Tc span -24 -19 -15.5 %fs/100 3
Tc offset -7 +7 %fs/100 3
Tcr +18 +22 +33 % /100 3
Linearity -0.45 -0.15 +0.45 %fs 4
Bridge impedance 5 K|¸
Proof pressure 2x Fixed fs
Burst pressure 4x Fixed fs
Operating temperature -40 +125
Storage temperature -55 +150
Notes:
1. Measured at 5v constant voltage excitation.
2. The offset is ¡¡§¡è50mv for 100kpa, 150kpa
3. Measured from 0 to 60 c
4. Defined as best straight line.
Feature
1.Water-based ink printing,green enviromental protection,no pollution, in line with international environmental protection
printing standard
2.From 1 to 15 colors printing color group,can be arbitary combination
3.Printing unit using high-precision
4.Flexo printing method:flexo printing or combination of flexo and gravure
5.Upper feeder structure reduces the version of the plate roller and network roller,thus reduce the focus of whole printing group
,the equipment run more smoothly,completely overcome the surface dust,flying ink, the ink on the printing quality of pollution;
6.Totally enclosed type doctor blade can supply quantitative ink,overcome the flying ink, ink leakage phenomenon,save in,can accurate
control for the ink amount,makes the ink stability,further improve the printing quality
7.High precision tension sensor closed loop design of constant tension,ensure accurate printing tension stablility
8.Computer automatic color register control,overlay accuracy and stability
9.High performance correction system,ensure base material is running the end face of the linear stability and winding finised product uniformity
10.Air drying unit takes high energy efficient,the heat conduction oil or steam heating mode is also choosed
11.HD color still images, easy printing quality was observed
12.Distribued console,easy to operate
13.Save paper and supplies,reduce labor and cost
Scope of applications
Printing and packing industry high speed presswork of roll paper and plastic films, such as food package,cigareete package,madecines,daily necessities,
industrial, carton pre-printing and so forth
Model Max web width Max printing width Max repeat Max rewinder dia Max material speed Mark
XYRA850 870 850 1200 1100 150
XYRA1000 1020 1000 1200 1100 150
XYRA1100 11201100 1200 1100 150
XYRA1270 1300 1270 1200 1100150
XYRA13501370 1350 1200 100 150
XYRA1450 147014501200 1100 150
XYRA1600 1620 1600 1200 1100 150
Mark
Advantages(compare with CI flexographic printing machine)
1.printing speed 150m/m(CI flexo max printing speed 120m/m)
2.With long dryer 1.6meter length, will be dryed fast
3.Easy operation, worker can be in and out freely, CI with big central drum cannot do it
4.Color register anilox roller for the ink transfer, sealing doctor blade, 7 motor, pre color register
5.Unwinding and rewinding automatic
6.Water based ink for more enviromental
7.Our successful case for sold usa and autrilia:CSR company
Peristaltic pump CM1000/YZ1515X Flow range is 0.007~380ml/min/channel. Flow speeds can be adjusted either by hand through switching knobs, instead of the traditional way of membrane keypad, which reduces obviously the failure rate, or by automatic control through the external controller interface, with three available modes: 0-5V, 0-10V and 4-20mA. Memory function is also available in the product in case of power off. Besides, switching knobs are designed clearly so that it is easy to operate for customers. FULL SPEED button available for filling in & emptying out. Good capability price rate. Not suitable when used in the open air.
Function & Characteristics
1. With liquid calibration function to ensure the high accurancy liquid transfer.
2. With both-way large torque high power motor. It can be connected with several pump heads to meet different flow rates.
3. Long life digital rotary knob easy to operate high control precision and ensure to transfer the high precision fluid.
4. FULL SPEED button is available to fill in & empty out the tubing.
5. Memory function available in case of power off and it will continue working once the power was restarted.
6. Long-range control is available through the DB15 interface of the drive: speed control start-stop control direction control.
7. With RS485 communication interface supports MODBUS communication protocol. And communication protocols customized is available.
Description:
1. Stack Sizer Screen by the separator, feeder, screen frame, rubber spring, anti-wear polyester screen, electric vibrator, support, collection bucket and so on.
2. Stack Sizer Screen is a unified vibration source to drive multi-layer screen box common vibration equipment.
3. Stack Sizer Screen using independent screening system screen boxes stacked up and down the layout of scattered methods, the screen surface of each layer to complete the independent feeding, screening operations, the screening surface of each layer of material were collected from the discharge .
4. Feeding concentration: 25 -50% (according to the nature of the material to determine).
5. Ambient temperature: no more than -20 ~ 40 .
6. Excitation force: 0 - 3500 kg, adjustable.
7. Double vibrator configuration, linear vibration with the reconstruction of pulp patent technology, flow area screening materials, transmission speed, the maximum from the feed in screening fine materials.
Advantages:
1. Laminated high-frequency fine screen is developed by our company's high-performance grading materials grading equipment.
2. Advanced 5 laminated linear vibration technology, large vibration amplitude, saving floor space.
3. Two sets of cylindrical motor configuration of the linear motion, hanging rubber spring system suspended in the outer support frame, vibration force uniformity, low noise, low load, low power consumption, environmental friendly.
4. Wear-resistant parts of the equipment, according to the use of resistant ceramic, rubber, polyurethane and other wear-resistant materials to extend the service life of equipment and reduce equipment maintenance.
5. Frequency conversion design, effective control of screening size.
Applications:
1. Used in iron ore, ilmenite ore concentrator concentration control and grading.
2. Widely used in tungsten, tin, tantalum, niobium ore concentrator, such ore is more brittle, than the major, can be used instead of high-frequency vibration sieve spiral classifier, cyclone classification, or combination of classification, improve the efficiency of mineral processing , So that the recovery rate increased by 8% to 15%, while the processing capacity of the grinding system increased by about 20 to more than 30%.
3. Quartz sand for the glass raw materials, feldspar ore dressing plant, quartz sand bar mill product size wide, angular, and is difficult to screen materials, Using high-frequency vibration fine screen can be stable to produce qualified products.
4. Kaolin beneficiation plant for controlling the final product particle size.
High-temperature cable HSDS-30/L by Yoyik
YOYIK, located in the industrial city of Deyang, Sichuan, is a leading enterprise specializing in the production of power station equipment and accessories. With its excellent manufacturing technology and strict quality management system, it has won wide acclaim in the domestic and foreign markets. The company not only provides key components of traditional power generation equipment such as turbines and generators, but also keeps pace with the times and actively develops products that adapt to new energy trends, such as wind power generation and solar power generation system accessories, and is committed to providing diversified solutions for the global energy industry.
Yoyik can offer many spare parts for power plants as below:
#DF-High-temperature cable HSDS-30/L by Yoyik-DF
Indicator light XB4BVM5
speed sensor JRZS-075-05
SPEED INDICATOR WZ-3C
Electromegnatic valve (GOV) MFZ2-3C
Speed card DF2012
Eddy Current Sensor PR6424/101-000
micro lvdt sensor DET100A
EH oil level low low shutdown liquid level switch CCH04.330Z-1
PRESSURE SWITCH TBN JACKING OI 9NN-EE45-M4-C1A-X371
magnetic linear sensor C9231125
Axial Displacement Sensor WT0112-A90-B00-C01
PRESSURE SWICTH LOW EH OIL TRIP RC860MZ097Z
Card for controller A-A/D U11
rotary hall effect sensor TD-01
thermocouple WRNK2-336GF-K-GH3039L=10000
Plasma cathode head EPBS-G-II-175-YJ/XL
Eddy Current Sensor PR6422/101-111
Communication board CI-1321
Eddy Current Sensor PR6422/001-141
Pt100 -RTD temperature probe 30cm Probe length, Fixing Thread: 1/8" G or NPT
HP CASE EXPANSION SENSOR TD-2-25
8mm Current Probe CWY-DO-812510
Transmitter Differential pressure 328A8677P102
Eddy Current Signal Converter CON041/914-080
level gauge in tank UHZ-DB
pressure switch price TP33B-30
DC splitter FL-II
linear transducer sensor HTD-100-6
Temp sensor AS5181PD50Z2
Temperature sensor Platinum PT100 WZPM2-001 L:10 m
Pressure transmitter 2200BGC2505F3DA
Rotation Speed Probe ZS-04-75-5000
Pressure Transmitter 4th Stage Extraction 3051TG2A2B21AB4M5Q4
mechanical seal CZ65-250
Magnetic level gauge UZ-O
Expansion indicator HPSQ-150\220*250
High-temperature cable HSDS-30/L by Yoyik
Product description
Advantage of kaisi product
Compact size, complete type
High test accuracy
Long-life using
Easy installation
Passed ce(certificate of compliance)
Good after-sale service
Technical data
Series ks15
Output typeDigitalAnalogue
Stroke range0~500mm0~400mm
Resolution0.004 0.002 0.001Infinitesimal
Output signalC(npn/pnp) pull-push line driver0~5ko 0~10ko
4~20ma 0~5v, 0~10v 485 232
Linearity0.05%fs0.5%fs~0.1%fs
Working voltageDc5v or dc5-24vDc10-30v or none
Working temperature-25?~85?-45?~125?
Net weight450g450g
Protection classIp54~ip65Ip54~ip65
Service life5 million~10 million5 million~10 million
Cable length4m2m
Package and delivery
1pc per box and the carton size is 11.5cmx8.5cmx9.5cm
Delivery in 3-7 workdays after receiving payment.
Goods shipping by ups, ems, dhl or other express way
After-sale service
We test goods before delivery and provide 12 months quality guarantee.
Factory overview
Kaisi manufactures linear position transmitters with analogue and digital signal output. We supply effective stroke from 0mm to 50, 000mm. Also, we accept oem, water-proof and explosion-proof order. Our products passed ce(certificate of compliance) already. Any inquiry about our product and company will be highly appreciated here.
Any inquiry, please feel free to contact us. And we will reply you asap.
Pressure transmitter CY-I for Thermal Power
YOYIK, located in Deyang, Sichuan, is a comprehensive power station equipment and accessories company integrating R&D, manufacturing and sales. It is well-known in the industry for its exquisite craftsmanship and strict quality control. The company not only provides key components for thermal power and hydropower stations at home and abroad, but also involves in new energy fields such as wind energy and nuclear energy, showing strong innovation and adaptability. With customized services and global market layout, YOYIK has become a trusted partner of many large projects.
Yoyik can offer many spare parts for power plants as below:
#DF-Pressure transmitter CY-I for Thermal Power-DF
Level Gauge Sight Glass With Seal AL-Si 88412 No-0019 TLTG
Eddy Current Sensor PR6422/003-031
Displacement sensor LVDT for GV TD-1-250-10-01-0
Eddy Current Sensor PR6422/001-030
pressure switch price RC861CZ090HYR
speed sensor CS-4-100-02-01
card CI-132I
Presure Sensor SZ010BF-C2
Turbine Expansion Sensor TD-2 (0-35mm)
Thermal Case Expansion TD-2-26
Eddy Current Signal Converter CON041/915-040
Temperature Transmitter JM-B-T010-562D2
VACCUM CIRCUIT BREAKER ZN63-VS1-3150-40KA
Proximity switch E2B-M12LS04-WZ-B1 PNP
industrial displacement sensor HTD-200-3
SFP Multimode LC OSP155-312DTR
tachometer magnetic sensor ZS-04 L=65
differential pressure sensor 1NN-K45-M4-F1A
INTELLIGENT REVERSE ROTATING SPEED MONITORING DEVICE JM-C-337
sensor CS-3-M10-L100
LVDT Sensor TDZ-1E-20B
Pressure Controller RC778NZ097Z
Thyristor NFP-KC5
Embedded touch screen HSDS-30/C
vibration transmitter STA-SZ6-50
LVDT Sensor 4000TD-15-01
Intermediate relay UEG/C-3H3D
LVDT Governor Valve 191.36.09.07 RANGE:�±127mm
Furnace tube leakage data acquisition board AD6311
Coil 1240-220V
Eddy Current Sensor PR6426/000-120
linear motion sensor 14000TD 0-700mm
magnetic level sensor UHZ-618C17
Thermohygrograph Monitor L2W2K-Z3A(TH)
Thermal expansion monitoring instrument DF9032/05
Auxiliary power PSMU-1-12V/480W
Pressure transmitter CY-I for Thermal Power
MY-DFYL-2024-7-17
21 Zxtr2105Ff 7 Instead Ci Regulador Linear 5V 89Ma Suppliers
Short on time? Let Zxtr2105Ff 7 Instead Ci Regulador Linear 5V 89Ma sellers contact you.
