Innolux Corporation (hereafter called Innolux) ZJ050NA-08C is a 5.0 inch diagonal a-Si TFT-LCD display screen product, with an incorporated WLED lighting system, without backlight driver, without touch screen. This Innolux TFT-LCD is a 5.0 inch with Consumer Lcd Display, it have LCD Controller and Tft Color Screen. Based on datasheet with version of Final Ver.01 which was released out on 1 28 2015, ZJ050NA-08C supports display 640(RGB) 480 (VGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 101.76(W) 76.32(H) mm, outline size of 117.65(W 88.43(H ?5.9(D) mm, with surface treament of Antiglare, net weight of 67.0g (Typ.). As a TN, Normally White, Transmissive LCM product, ZJ050NA-08C can provides 250 cd/m display brightness 500:1 transimissive contrast ratio, 70/70/50/70 (Typ.)(CR10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 10/15 (Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors, also with performance of color gamut 50% (NTSC). This product adopted WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 15K hours, external backlight driver is additionally needed. ZJ050NA-08C utilizes Parallel RGB (1 ch, 8-bit) as it's signal inputting systerm, which connected by 50 pins FPC with power supply voltage of 3.3/10.4/17.0/-7.0V (Typ.)(DVDD/AVDD/VGH/VGL). It's typical vertical frame rate (Fv) is 60Hz.
2-head packaging machine (also can 4-18head according different capacity choice) Packaging speed 15bags/min Bag length 90-320mm Bag width 80-210mm Overall weight 400kg Power 1.8kw/220v Packaging capacity 20-1000ml Outer packaging size 820 x1220 x 2500mm Packaging form Back sealing This machine is an intelligent weighing automatic quantitative packaging machine with four scales and microcomputer control. Suitable for quantitative packaging of granular materials such as miscellaneous grains, nuts ,pesticides, fertilizers, veterinary drugs, premixes, additives, laundry detergent, salt, monosodium glutamate, white sugar, seeds, rice, snacks, hardware, etc. Performance characteristics: 1. High precision digital sensors enable precise measurement to be achieved instantly. 2. The microcomputer control system is technologically advanced, easy to operate, and more reliable to use. 3. Fast and slow vibration feeding, automatic correction of errors, achieving high-precision packaging. 4. Four scales work alternately, with fast packaging speed. 5. High quality stainless steel is used for the material contact part, which is anti-corrosion, dust-proof, and easy to clean. Host configuration: This machine is equipped with a dual CPU microcomputer control system, a 5-inch LCD display in Chinese or English, a user-friendly operation interface, automatic cursor detection and tracking, and simpler operation. Equipped with high-precision stepper motors to ensure the accuracy of the cutting position of each packaging bag.
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT
Innolux Corporation (hereafter called Innolux) G154IJE-L02 is a 15.4 inch diagonal a-Si TFT-LCD display panel product, with an integral WLED backlight system, With LED Driver , without touch screen. It features an operating temperature range of -10 ~ 70C , a storage temperature range of -20 ~ 80C , This Innolux TFT-LCD is a 15.4 inch with Consumer Lcd Display, it have LCD Controller and Tft Color Screen. G154IJE-L02 supports display 1280(RGB) 800 (WXGA) with aspect ratio of 16:10 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 331.2(W) 207(H) mm, outline size of 352(W) 230(H) 9.2(D) mm, viewing area size of 334.5(W) 210.3(H) mm, with surface treament of Antiglare, Hard coating (3H), net weight of 920g (Typ.). As a MVA, Normally Black, Transmissive LCM product, G154IJE-L02 can provides 400 cd/ display brightness 1000:1 transimissive contrast ratio, 88/88/88/88 (Typ.)(CR10) (L/R/U/D) viewing angle, best view direction on Symmetry , and response time of 15/10 (Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit / 6-bit + FRC gray scale signal for each dot, thus presenting a palette of 262K/16.2M colors, also with performance of color gamut 45% (NTSC). This product adopted 9S5P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 50K hours, With LED Driver. G154IJE-L02 utilizes LVDS (1 ch, 6/8-bit) as it's signal inputting systerm, which connected by 30 pins Connector with power supply voltage of 3.3V (Typ.). It's typical vertical frame rate (Fv) is 60Hz.
CHIMEI INNOLUX 10.4 inch 800x600 TFT LCD display with 60pin RGB interface LSA40AT9001 Heng Cheng electronic technology company limited,one of the professional agent of Innolux TFT LCD module in Shenzhen, China We provide grade A Innolux TFT LCD module and helped worldwide clients on projects of automotive system, industrial control, security, bank, securities, medical instruments, monitoring, instrumentation Specifications Size: 10.4 inches Resolution: 800x3 (RGB) x600 Aspect ratio: 4: 3 Module size: 228.4 x 175.4 x 5.9 mm Active area: 211.2 x 158.4mm Viewing angle: 50/60/70/70 Operating temperatures: -10 to 50°C Storage temperatures: -20 to 60°C Relative humidity: 50ºC,80% RH Interface: RGB (60-pin) Applications: For Digital photo frame, consumer machines, automotive, camera, POS machine, building intercom and printer OEM can be accepted, if you have any requests do not hesitate to contact us
AT056TN53 V.1 (Alias: AT056TN53 V1) is a 5.6 inch diagonal a-Si TFT-LCD display screen product from Chimei Innolux, with a built-in WLED backlight, With LED Driver, without touch screen. On the basis of latest version datasheet Final Ver01 which was released out on 4 6 2010, This Innolux TFT-LCD is a 5.6 inch with Consumer Lcd Display, it have LCD Controller and Tft Color Screen.AT056TN53 V.1 supports display 640(RGB) 480 (VGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 112.896(W) 84.672(H) mm, outline size of 126.5(W) 100(H) mm, viewing area size of 115.90(W) 87.67(H) mm, with surface treament of Antiglare, net weight of 83.1g (Typ.). As a TN, Normally White, Transmissive LCM product, AT056TN53 V.1 can provides 350 cd/m display brightness 500:1 transimissive contrast ratio, 70/70/50/70 (Typ.)(CR10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 10/15 (Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 6-bit gray scale signal for each dot, thus presenting a palette of 262K colors, also with performance of color gamut 50% (NTSC). This product adopted WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 20K hours, With LED Driver. AT056TN53 V.1 utilizes Parallel RGB (1 ch, 6-bit) as it's signal inputting systerm, which connected by 40 pins FPC with power supply voltage of 3.3V (Typ.)(VCC). It's typical vertical frame rate (Fv) is 60Hz.
Chimei Innolux Corporation (hereafter called Chimei Innolux) AT056TN52 V.3 is a 5.6 inch diagonal a-Si TFT-LCD display panel product, with an integral WLED backlight system, without backlight driver, without touch screen. It features an operating temperature range of -20 ~ 70C , a storage temperature range of -30 ~ 80C . This Innolux TFT-LCD is a 5.6 inch with Consumer Lcd Display, it have LCD Controller and Tft Color Screen. AT056TN52 V.3 supports display 640(RGB)480 (VGA) with aspect ratio of 4:3 (W:H), whose pixels are arranged in RGB Vertical Stripe. As for mechanical detail, it features active area of 112.896(W)84.672(H) mm, outline size of 126.5(W) 100(H)6(D) mm, viewing area size of 115.70(W)87.47(H) mm, with surface treament of Antiglare, net weight of 127.5g (Typ.). As a TN, Normally White, Transmissive LCM product, AT056TN52 V.3 can provides 200 cd/m display brightness 500:1 transimissive contrast ratio, 70/70/50/70 (Typ.)(CR10) (L/R/U/D) viewing angle, best view direction on 6 o'clock , and response time of 10/15 (Typ.)(Tr/Td) ms. Gray scale or the brightness of the sub-pixel is determined with a 8-bit gray scale signal for each dot, thus presenting a palette of 16.7M colors. This product adopted 3S5P WLED as it's backlight systerm which was placed as Edge light type and have a working life time of 20K hours, external backlight driver is additionally needed. AT056TN52 V.3 utilizes Parallel RGB (1 ch, 8-bit) as it's signal inputting systerm, which connected by 50 pins FPC with power supply voltage of 3.3/5.0/15/-10V (Typ.)(VCC/AVDD/VGH/VGL). It's typical vertical frame rate (Fv) is 60Hz.
Physical properties 1. Appearance: No residue at 40 deg. C 2. Cold test: Min.48 hours at 0 deg. C 3. Colour: Max.1.2 red, lovibond tintometer 5/20 inch 4. Refractive index:1.465-1.475 at 40 deg. C 5. Density:0.91-0.92 g/cm3 at 20 deg. C 6. Volatile matter: Max.0.07 % at 105 deg. C 7. Taste : Excellent 8. Odor : None Chemical specifications 1. %free fatty acids (ffa): Max 0.1 2. % ash (*): Max.0.05 3. Saponification value:190.32 koh/g. Of oil 4. Iodine value:134.13 (wijs-hanus method) 5. Peroxide:0.2 meq/KG. Of oil 6. % soap:0.0005 7. % unsaponifiable matter: Max.0.12 8. Impurities: None 9. % saturated fat(-ty acids):8-12 10. % unsaturated fat(-ty acids):87-91 11. Feeding energy:900kcal 12. Iron : < 0.02 mg/lt 13. Fatty acid composition : C14:0 :0.06 C16:0 :5.77 C18:0 :4.1 C18:1 :27.3 C18:2 :59.2 C20:0 :0.27 C18:3 :0.25
Place of origin: beijing, china (mainland) Brand name: stone Model number: sta050wt-01 Type: tft Size: 5'' Module: cpu Colour: 65k ( 16bit) Resolution: 480*272(16:9) Brightness: 450cd/m2 Packaging details: Packed by carton Delivery detail: 2 weeks
1.Size: 126*83*18 MM 2.Voltage: 9-35 V 3.Contrast: 350:1 4.Brightness: 350cd/m2 5.Physical resolutionï¼?800*480 6.Standard: PAL /NTSC 7.Power supply: DC port 8.Ratio: 16:9/4:3 9.Power: About 2 W 10.Control: OSD 11.Operation temperature: -20 ~ 50 12.Storage temperature: -30 ~ 70 13. Color: black and silver
CHEMICAL CHARACTERISTICS: Free Fatty Acid: 0.1 - 0.15% max Peroxide Value: 1.0 - 2.0 meq/kg max Color (Lovibond): 12.0 - 15.0 Yellow / 1.5 - 2.0 Red Iodine Value (Wijs): 100 - 122 Moisture: 0.05 %max AOM: 20 hrs min Cold Test: 5.5 - 12 hrs min Refractive Index @ 40oC: 1.460 - 1.467 Specific Gravity @ 25oC: 0.914 - 0.920 Saponification Value: 182 - 193 Smoke Point: 460 - 530oF Flash Point: 610 - 640oF Fire Point: 670 - 690oF FATTY ACID PROPERTIES: C16:0 Palmitic 3.0 - 5.0% C16:1 Palmitoleic 0.2 - 0.3% C18:0 Stearic 1.0 - 3.0% C18:1 Oleic 56.0 - 76.0% C18:2 Linoleic 10.0 - 24.0% C18:3 Linolenic 4.0 - 13.0% C22:1 Erucic 0.2 - 1.8% FATTY ACID DISTRIBUTION: Saturated 4.3 - 7.4% Monosaturated 54.4 - 65.0% Polyunsaturated 27.2 - 37.0% CRUDE CANOLA/RAPESEED OIL SPECIFICATIONS: Free Fatty Acids (As OLEIC) Molecular Weight 282-Basis: BASE 1.00% MAX. 1.25% Moisture and Volatile Matter: 0.20% MAX. Density (Specific Weight) at 25 C and 4 C Min. 0.9180 Max. 0.9225 Flash Point: MORE THAN 121 (250 F) Saponification value Min. 188 Max. 198 Impurities (Insoluble in Petrol Ether): 0.10% MAX. Unsaponifiables Matter (test as per N.O.P.A.): Max. 1.50 pct. Sediment (Gardner Break Test): 0.10% MAX. Lecithin (expressed as Phosphorous): 0.02% MAX. Color Index (MG Iodine) (Lovibond Cell 1 inch): 50-60 Yellow and 5-6 Red. Refractive index at 20 degrees C: 1.505 to 1.512 Halphen reaction Negative Density (at 15�° C): 900-930kg/m3 Flash Point: 220�°C ( closed up, Pensky-Martens method) Calorific value: 35.000 kJ/kg Kinematic viscosity: 38 mm2/3 (40�°C) Coke deposit: 0.4 mass-% (Conradson procedure) Iodine value: 100-120g/100g Sulphur content: 20mg/kg Neutralizations number: 2,0mg KOH/g Phosphorus content: 15mg/kg Water content: 75mg/kg Ash: 0.01 mass%
Ultrasound therapy unit Description Ultrasound therapy 1 and 3 Mhz clinical use Digital with LCD Deluxe Model Metallic Body Manarti 1 and 3mhz frequency Pulsed and continuous therapy operation 10%, 20%, 50% and 100%veriable duty cycle output of 16hz, 48hz, or 100hz. Clinical protocols, the most appropriate application and parameter set for the patientâ??s condition. light weight designs for clinic, hospital and home visits. auto detection of ultrasound applicator. micro controller-based design for optimum accuracy. Soft touch buttons. timer 0-30 minute put power is up to 2. 5 watts / cm2, which is controlled digitally back light LCD display
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Product name: 5 inch TFT LCD Size: 5 inch Resolution: 800*480 Outline Dimension: 120.7(W)*75.8(H)*3.1(D)mm Active Area: 108(W)64.8(H) mm Viewing Direction: 70/70/50/70 Operating Temperature: -20~70 Interface: RGB
