YT transparent self-luminous ABS road stud delineator as a traffic signal
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF14
Product name
YT transparent self-luminous ABS road stud delineator as a traffic signal
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT transparent self-luminous ABS road stud delineator as a traffic signal
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF14
Product name
YT transparent self-luminous ABS road stud delineator as a traffic signal
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT transparent self-luminous ABS road stud delineator as a traffic signal
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF14
Product name
YT transparent self-luminous ABS road stud delineator as a traffic signal
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF14 (6)_YF14 (1)_YF14 (6)YF14 (1)YF14 (1)_YF14 (1)YF14 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT Nano-fluorescent self-luminous cat eye road stud delineator with glass beads
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF10 (2)YF10 (3)YF10 (5)YF10 (4)YF10 (1)YF10 (1)YF10 (3)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Factory saqure self-luminous road stud delineator with reflective panels
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF08
Product name
Factory saqure self-luminous road stud delineator with reflective panels
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF08 (1)YF08 (1)YF08 (1)_.jpgYF08 (2)_.jpgYF08 (3)_.jpgYF08 (5)_.jpgYF08 (6)_.jpgYF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT self-luminous ABS plastic reflective road stud with Nano-fluorescent material
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF06
Product name
YT self-luminous ABS plastic reflective road stud with Nano-fluorescent material
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF06 (1)_.jpgYF06 (2)_.jpgYF06 (3)_.jpgYF06 (4)_.jpgYF06 (5)_.jpgYF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries.
The Major Utilization Areas Of Fly Ash :
- Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC).
- Part replacement of OPC in cement concrete.
- High volume Fly Ash concrete.
- Roller Compacted Concrete used for dam & pavement construction.
- Manufacture of ash bricks and other building products.
- Construction of road embankments, structural fills, low lying area development.
- As a soil amender in agriculture and wasteland development.
Types of Fly Ash:
- According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties.
- Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product.
- Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash.
- Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics.
Gayo, which also means nice, is an ethnic group with their own language, strong music and dance culture, and society of highly educated scholars. The Gayo tribe has a population of 85.000, and they live predominantly in the scenic, pine-studded mountainous region of Aceh province on the island of Sumatera, accessible only by road and hence fairly remote. Also known as Urang Gayo, they have traditionally been rice farmers and traders.
Aceh Gayo Arabica Coffee comes from the Gayo highlands, where the superb tropical volcanic soil provides a unique earthy, deep, rich taste. The crop is organically grown without fertilizers and is widely known as green beans for being environmentally friendly. The people of Central Aceh developed the skill of coffee planting with the arrival of Dutch East Indies to the area around 1904.Grown above 1.200 meters, Gayo semi-washed Arabica coffee has thrived and is consistently rated as one of the best among Indonesia's many coffee growing regions. This lot has been hand-sorted a third time before export, hence it is called Triple Pick. This coffee has a light earthy notes with a full body and smooth aftertaste. It is mild in acidity, has caramel fruity tastes and bittersweet spicy.
YT Self-luminous Safety Aluminum Road Stud With Reflectors
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF27
Product name
YT Self-luminous Safety Aluminum Road Stud With Reflectors
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
750 (3)_.jpg750 YF27 (5)_.jpg750 YF27 _.jpg750(4)_.jpg750(6)_.jpgYF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT hangzhou energy storaged square self-luminous road stud with cat eyes
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF01
Product name
YT hangzhou energy storaged square self-luminous road stud with cat eyes
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF01 YF01 YF01 (4)YF01 (1)YF01 (5)YF01 (5)YF01 (3)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
This cream, enriched with Hyaluronic acid and organic Leaf of Life extract intensely hydrates and plumps the skin. At the heart of its formula, the Hyaluronic Power Complex developed by Clarins Laboratories helps boost the skin's natural self-hydration mechanisms and preserve its moisture reserves. Its fresh and silky texture melts instantly into the skin, leaving it plump, supple, luminous and comfortable.
YT round circle self-fluorescent double sided road stud with reflective film
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF05
Product name
YT round circle self-fluorescent double sided road stud with reflective film
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF05 (6)YF05 (2)YF05 (5)YF05 (6)YF05 (1)YF05 YF05 (2)YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Hangzhou YT Self-illuminating ABS road stud d with strong visibility
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF22
Product name
Hangzhou YT Self-illuminating ABS road stud d with strong visibility
Get ready to meet your complexions new best friend. With a featherweight texture, Damascena CC Face Cream is brimming with skin-beneficial natural extracts alongside complexion-correcting pigments to create a flawless base for makeup.
Its fresh texture, in perfect affinity with the skin, offers a natural, luminous finish.
Enriched with SPF 50 + broad-spectrum mineral sunscreens, which protect from harmful UVA and UVB rays, this intelligent, hybrid formula transforms your skin, to give a velvety, ultra-soft spotless finish. Damascena CC Face Cream is the first high definition radiance skincare: this ultra-fine, deeply moisturising texture is enriched with CC pigments. The new generation pigments self-adjust to your natural luminous beauty, freshness and radiance. With Golden C Technology it helps significantly reduce the look of key signs of ageing.
It is formulated with skin-loving ingredients! Infused with skin tone unifying and hydrating Natural Rose water, the formula spreads out evenly smoothing out any discolorations and imperfections for an instantly unified result.
Ideal for daily use, Damascena CC Face Cream significantly streamlines your makeup routine. Buildable formula allows you to create sheer to medium coverage. Perfect lightweight fluid foundation that reduces redness and perfects skin for an even, naturally glowing complexion.
Suitable for
Suitable for all skin types
How to Use
Apply a thin layer just like your daily moisturiser. Wear alone, for a veil of sheer, skin-perfecting coverage, or follow with foundation for a polished, full-coverage look.
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
Product Code
YF18
Product name
YT Factory Energy Storage Self-luminous Highway Road Reflective Delineator as Traffic Signs
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
YF18 (4)_YF18YF18__
YF18 (3)YF18 (2)
YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
YT yellow shell self-luminous rectangle reflector road studs with cat eye
Self-luminous series
These self-luminous road studs and delineators are highly durable devices, providing day and night visibility in adverse weather conditions. These are reflector type road stud offering a long response time and reflect light from vehicles headlight back to the driver's eye. They are used to provide distinct outline of pavement markings during poor visible conditions under fog and bad weather conditions. The fluorescent part is made of nano - fluorescent material. The greatest convenience is that they dont need any electric power or solar panel. Only with light, not even the sunshine, it can also absorb the daylight and storage it in the polymer material made part. Till the night, it shines out and guide the drivers for road safety. For further usage of warning purpose, LED solar road stud can also be combined with self-luminous function so that it provides drivers double safety guarantee.
light weight, lower cost-effecitve, high reflectivity, long-lasting, easy installation, wide range of application
Payment terms
T/T, L/C, Western union, Trade Assurance
yf03_YF03 (1)YF03 (9)YF03(8)YF03 (7)YF03 (4)YF04 YF03 (3)_YF self-luminating series
table of brightnessYetong road studplastic road stud_application
Procedures and precautions for installation of road stud.
1.Environment: keep the ground clean, out of water and dust. The ground must be dry.
2.Drill hole on the ground: drill holes according to the distance of the two holes on the road stud. Then put the road stud on and make holes to holes match and clear the dust.
If the spike is with anchor, then drill a hole 5mm deeper than the anchor to put it into the hole. And also need to put some glue into the hole.
3.Ratio of resin glue: make it 1:1 with the A and B type of resin glue. It will dry faster in summer than winter.
4.Apply glue: use a tool to take 5g glue and put it on the bottom of the road stud. Then put the road stud immediately on the ground. Finally install the screws.
5.Inspection: inspect whether the bottom is empty or not in case the glue comes out.
6.Time of solidification: it takes one day in winter and half day in summer.
Road studs are commonly known as highway studs or railways studs or highway markers.Road studs are a type of traffic safety product fixed in the middle of lane lines or yellow double-line for, through its retro reflection, reminding drivers to drive their vehicles along with the lanes.
Features :-
~ 112L x 91W x 20H (mm);
~ Shank 55mm;
~ Load capacity up to 25 tons;
~ Highest reflectivity lens area 168 square millimeters;
~ High durability;
~ High impact resistance;
~ Grove bottom for better grip and easy installation;
Epoxy resin installation method is normally adopted generally for installation of road studs. Two component road stud epoxy adhesive is usually used. Part A and Part B should be mixed thoroughly. To avoid wastage do not mix more epoxy than what will be required in the next 25 minutes (i.e. start with 1 liter only). 8 to 10 studs can be installed per liter of epoxy.
![Hydra-Essentiel [HA�²] Silky Cream](https://didwblovvwmoz.cloudfront.net/product_images/3707337/1654509/compressed/featured_image/24bb9ba7f07569e17a2703c488b1_886_1757.jpeg?format=webp)
