Name:6v15kg-cm digital servo, size:a:40.2mm b:20.1mm c:38.8mm d:48.0mm e:10mm, weight:56g ±0.2(1.46oz), gear type:titanium gear, speed:0.10sec/60º at (6v) 0.12sec/60º at (4.8v) Torque:15kg.Cm.At(6v) 13kg.Cm.At(4.8v) the features:waterproof, plastic case, resist heat and corrosion, all aluminium hull, easy to eliminate heat,adopt high quality coreless motor. Size:a:40.2mm b:20.1mm c:38.8mm
Name:6v20kg-cm digital servo; size:a:40.2mm b:20.1mm c:38.8mm d:48.0mm e:10mm; weight:56g ±0.2(1.46oz); gear type:titanium gear; speed:0.11sec/60º at (6v) 0.13sec/60º at (4.8v) Torque:20kg.Cm.At(6v) 17.2kg.Cm.At(4.8v) the features:waterproof; plastic case, resist heat and corrosion; all aluminium hull, easy to eliminate heat;adopt high quality coreless motor. Size:a:40.2mm b:20.1mm c:38.8mm
Single output shaft, 180 degrees rotation robot servo Name 6v13kg-cm digital servo size :40.2*20.1mm*38.8mm*48.0mm*10mm; weight:56g ±0.2 1.46oz) gear type:titanium gear speed:0.11sec/180º at (6v) 0.13 sec/180º at (4.8v) Torque:12.8kg.Cm.At(6v) 12kg.Cm.At(4.8v) Size :40.2*20.1mm*38.8mm*48.0mm*10mm
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stationsâ?? need, there are 48Vã??96Vã??120Vã??192Vã??220Vã??240Vã?? 360Vã??384Vã??480Vã??492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
SIZE:41.1*23*24.4MM WEIGHT:36g SPEED:0.3sec/60°/4.8 0.28sec/60°/6.0 TORQUE:7kg/4.8V 7.5kg/6.0V Voltage:4.8V-6V SIZE:41.1*23*24.4MM
Size:40.8*20.1*38 Weight:56g Speed:0.18sec/60°/6.0 0.16sec/60°/7.2 Torque:15kg/6.0v 16kg/7.2v Voltage:6.0-7.2 Size:40.8*20.1*38
AC to DC converter battery charger 150-1000VDC rectifier 120KW power supply Product Introductionï¼? SANDI AC/DC Charger is specially developed for DC chargers. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase, DC output voltage range from 150 to 1000VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger. Unique function High efficiency over the full load range, full load efficiency greater than 95% Wide output voltage range, 150-1000VDC, suitable for a wide range of Lithium or lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main featuresï¼? Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Wide input voltage range: 260~ 530Vac, adaptable to various power grid environments Three-phase AC input without neutral wire: Simplifies system design, eliminates the risk of excessive neutral current, and reduces system costs. Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Battery anti backflow: effectively protects the battery while ensuring reliable and safe operation of the system Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. RS485 interface (Optional)
Product Introduction SANDI AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-750VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface (Optional)
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Product Introduction SAND AC/DC Charger is specially developed for DC chargers module. It has high efficiency, high power factor, high power density, high reliability advantage. AC input 3 phase or single phase, DC output voltage range from 100 to 750VDC can be set, compliant with CE safety requirements, EMC standard EN61000-6-3 and EN61000-6-1 Class A, it is an advanced international level charger module. Unique function High efficiency over the full load range, full load efficiency greater than 95.5% Wide output voltage range, 100-1000VDC, suitable for a wide range of Lithium and lead acid battery 5-inch LCD touch screen, easy to operate Flexible application, charging voltage, charging current, charging time, timing charging can be set by LCD screen, easy to operate Main features Powerful protection, overheating, short circuit, overload, overvoltage, undervoltage, etc. Three phase active power factor correction technology, reduces the harmonic interference to the grid Dual DSP design, achieve the full digital control, less components means high reliability Wide input voltage range, allows operation in most poor grid conditions Soft start charging and soft shutdown minimize the impact on the battery. Input, output have protective circuit breaker switch Module adopts hot pluggable design, which is convenient for maintenance. CAN/RS485 interface
Scientific name Plukenetia Volubilis Linneo Ingredient - Sacha inchi Description - Extra virgin sacha inchi oil is made using a careful cold pressing process, ensuring all the seed properties conservation. Nutritional Characteristics - Rich in polyunsaturated fatty acids: 48% Omega 3, 38% Omega 6 and 14% Omega 9. High protein content food (more than 50%). Rich in vitamin A (681 ug in 100 ml) and vitamin E (among 175.68 and 223.29). Sensory Characteristics Color Light yellow Smell Caracteristic Taste Caracteristic Texture Oily liquid Physicochemical Characteristics Characteristics : Range or Limit Acidity : 0.2 - 0.8 mg KOH/g Peroxide index :
Sacha Inchi (Plukenetia volubilis Linneo) Sacha Inchi, which in Quechua means mountain peanut, is a tree that grows in the Amazon of Peru. The seed of the plant is eaten raw like a nut or in the form of extra virgin oil. It is known for its incredibly high levels of Omega 3, 6 and 9 fatty acids even more than fish oil. It also contains vitamins A and E and amino acids. The health benefits of Sachi Inchi are numerous, including blood pressure regulation, prevention of certain types of cancer, hormonal balance, alleviation of cardiovascular problems and the reduction of bad cholesterol. Lowers LDL and raises HDL cholesterol, helps us deal with stress and feel calm and happy due to presence of tryptophan., thanks to the tryptophan, also regulate appetite so we don�??t get cravings, overeat, presence of high amount of Omega 3 helps control glucose levels., anti-inflammatory nature of sacha inchi may make it a good supplement to ease joint pain and rheumatoid arthritis. PRODUCT DESCRIPTION Scientific name : Plukenetia Volubilis Linneo Ingredient : Sacha inchi Without Salt Description : It is a native plant of tropical South America. Produces oilseeds with the highest content of unsaturated fatty acids and the lowest percentage of saturated fats. NUTRITIONAL : Contains 48% Omega 3, 38% Omega 6 and 14% Omega 9. High protein content food. CHARACTERISTICS : 50%). Rich in vitamins A and E. SENSORY CHARACTERISTICS Color : Light brown Smell :Characteristic Taste :Characteristic Appearance : Seed bulging in the center and crushed to the edges, rough and oval PHYSICOCHEMICAL CHARACTERISTICS Characteristics : Limit Humidity : Maximun 4% Preservatives :Absent Antioxidants : Absent MICROBIOLOGICAL CHARACTERISTICS Characteristics Limit Mesophilic A. (CFU/g)
Sacha Inchi (Plukenetia volubilis Linneo) Sacha Inchi, which in Quechua means mountain peanut, is a tree that grows in the Amazon of Peru. The seed of the plant is eaten raw like a nut or in the form of extra virgin oil. It is known for its incredibly high levels of Omega 3, 6 and 9 fatty acids even more than fish oil. It also contains vitamins A and E and amino acids. The health benefits of Sachi Inchi are numerous, including blood pressure regulation, prevention of certain types of cancer, hormonal balance, alleviation of cardiovascular problems and the reduction of bad cholesterol. Lowers LDL and raises HDL cholesterol, helps us deal with stress and feel calm and happy due to presence of tryptophan., thanks to the tryptophan, also regulate appetite so we dont get cravings, overeat, presence of high amount of Omega 3 helps control glucose levels., anti-inflammatory nature of sacha inchi may make it a good supplement to ease joint pain and rheumatoid arthritis. Product Description Scientific name : Plukenetia Volubilis Linneo Ingredient : Toasted Sacha inchi Without Salt Description : It is a native plant of tropical South America. Produces oilseeds with the highest content of unsaturated fatty acids and the lowest percentage of saturated fats. NUTRITIONAL : Contains 48% Omega 3, 38% Omega 6 and 14% Omega 9. High protein content food. CHARACTERISTICS : 50%). Rich in vitamins A and E. SENSORY CHARACTERISTICS Color : Light brown Smell :Characteristic Taste :Characteristic Appearance : Seed bulging in the center and crushed to the edges, rough and oval PHYSICOCHEMICAL CHARACTERISTICS Characteristics : Limit Humidity : Maximun 4% Preservatives :Absent Antioxidants : Absent MICROBIOLOGICAL CHARACTERISTICS Characteristics Limit Mesophilic A. (CFU/g)
1. Solar multifunction fan 10W with LED light 2. Solar panel: polysilicon panel 6V/12W 3. Battery capacity: 32650 Lithium 15500mah 3. Charger: 5 V power supply adapter 4. Wind Type:3 Gears , Soft and strong 5. Charging time: 3-5 hours with USB Funcation 6. working time: 5-8 hours 7. Fan size: 10 inches, 32cm high, 30cm wide 8. Solar panel size: 34*29cm 9. Packing q'ty: 1 sets/box 10. Measure: 36*22*31 cm 11. FCL: 3KGS
About this item *Extendable & Foldable Selfie Stick The Selfie Stick thanks to the hidden retractable design, It is extremely compact when folded up, only 10.7 inches (27.3 CM) 205g, very light to carry, Fits perfectly in a handbag ready to use whenever. But also can extend a long way (to 41 inches including the handle), and let you capture selfies with a larger field of view, great for Selfies, Group Photos, Face-time, Life-Vlog, Video shooting, Social life, etc. Selfie Stick Tripodã??This is a nifty piece of kit, not only a selfie stick but can also be converted very easily into a phone stand, At the bottom end, you can release the four legs to get a tabletop tripod. In normal conditions on a flat surface, The shorter it is extended, the more stable it will be. A nice steady balanced tripod for convenience of hands free selfies and Facetime/video calling. Detachable Remote Control The selfie stick comes with a battery-powered button, The button clicks out of the handle with a little push, To switch on and make the unit visible to the phone via, itâ??s as simple as holding the remote button down for a few seconds and the selfie stick appears and is ready to connect, and once connected and open the phone camera app to use it to take a selfie. ã??Adjustable Phone Holder and Rotation Angleã??The Phone clips to hold your phone are simple enough, you unfold the two little pads and extend the sprung end of the clip to hold your phone, very sturdy and grips your phone nice and tight. 225�° rotation head allows you to find your favourite shooting angle by simply rotating the knob to meet different needs better. Widely Compatible and Warranty The width of the phone holder is between 6-9cm, Compatible with Most Smart Phone and Gopro in Market, such as phone holder for iPhone 15/14/13/12/12 Mini/12 Pro/12 Pro Max/11/11 Pro/XR/X/8 Plus/Galaxy Note 20/S20/S10/S9/Google/OnePlus/Android Smartphone. If you are not satisfied, DIKA team Service of items includes a one-year Warranty,24 hour Online Best Service!
Name8.5v16kg-cm digital servo; Size :a40.2mm b20.1mm c38.8mm d48.0mm e10mm; weight:56g �0.21.46oz); Gear type:titanium gear; Speed:0.14sec/60� at (7.4v) 0.12sec/60� at (8.5v) Torque:(205.5 oz-in)14.8kg.Cm.At(7.4v) (234.7 oz-in)16.9kg.Cm.At(8.5v) Digital servos features: support high voltage;waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. - -
(201.4 oz-in)14.5kg.Cm.At(4.8v) the features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. - -
Name:6v20kg-cm digital servo; Size :40.2mm 20.1mm 38.8mm 48.0mm 10mm; weight:56g 0.2(1.46oz); Gear type:titanium gear; speed:0.13sec/60o at (6v) (238.9 oz-in)17.2kg.Cm.At(4.8v) The features:waterproof; plastic case, resist heat and corrosion; aluminium middle hull, easy to eliminate heat;adopt high quality coreless motor. -