Dimension of sliding table 3000íß370mm Cross cut capacity 3000mm Width of cut between saw blade and rip fence 1250mm Saw bladeª¦ 300mm(ª¦250-ª¦300) Height of cutª¦300mm 80mm Height of cut with saw blade ª¦300mm at 45íp55mm Speed of main saw blade 4000/6000rpm Spindle diameter 30mm Tilting saw blade 0-45íp Main motor 4kw Scoring saw blade 120mm Speed of scoring saw blade 8000rpm Spindle of scoring saw 20mm Scoring motor 0.75kw Weight 700kg Overall dimensions 3050íß3050íß900mm
Dimension of sliding table 3200íß370mm Cross cut capacity 3200mm Width of cut between saw blade and rip fence 1250mm Saw blade ª¦300mm(ª¦250-ª¦300) Height of cut ª¦300mm 80mm Speed of main saw blade 4000/6000rpm Spindle diameter 30mm Tilting saw blade 0-45íp Main motor 4kw Scoring saw blade 120mm Speed of scoring saw blade 8000rpm Spindle of scoring saw 20mm Scoring motor 0.75kw Weight 1100kg Overall dimensions 3250íß3050íß900mm
The chippers can be used to cut logs, branches, slab, waste veneer, bamboo, cotton stalks, and other non-wood fiber stems into dimensional chips which are the essential material for the production of particle board, fiberboard and paper pulp. The chippers, boasting advanced structure and wide adaptability, can produce chips of high quality. They are easy to operate and maintain. The chipper is made up of machine base, rotor, upper and lower feed roller, feed belt conveyor, hydraulic system, etc.
This series of machine can produce chips of high quality. They can be used in paper mill, particle board plant, fiberboard plant and chip production bases. They can cut logs and small wood into high quality chips with even length, smooth chip cut and uniform chip thickness. They can also cut branches and slabs. This chipper consists of frame, knife disc, feed and discharge spout, case and electrical control system, etc. The chips length is adjustable in accordance with the requirement of the paper pulp, particle board and fiber board industries. Compact in structure, easy to operate, high capacity, excellent production and low energy consumption, which make the machine the ideal equipment for chip production industries.
Knife Ring Flaker is one of the main equipments in the preparation workshop section of particle producing. It takes wood chips, bamboo chips, broken veneer as raw materials and cut them into particles of certain thickness(0.25-0.4 mm),which is the raw material of particleboard. The machine is made up of machine base, rotor, impeller, magnetic separation, separation, weight separation, vibrating feeder, hydraulic system, and brake system, etc. In addition, it has some assist devices such as knife grinding adjustment devices. After removing iron and non-ferrous impurities, the chips are delivered into the cutting chamber and are made into particles at the 60m / s cutting speed. The particle thickness is controlled by the outer knife. By reducing the length of the outer knife, the machine can be used for preparation of homogeneous particleboard wood shavings.
Drum re-chipper can chip the large wood sheet, waste veneer, and the bark into small sheets as the raw materials of wood based panels or fuel. It also can be used to cut shredded paper and cardboard, and also can be used to crumble plant straw cellulose, such as cotton stalks, bags, waste flax, jute shank, and wild couch grass and straw, which can be the raw materials of particle board or press board.
Screen ring wood grinding machine is used to grind particles made by flakers into fine particles, which is the surface material of particleboard. It polishes wood shaving into fine particles of certain technical requirements. It consists of machine base, grinding sieve ring, impeller, vibrating feeder, magnetic separation, and separator, etc.
The quality of the blade for various wood machining, wooden products manufacturing is very important. According to the need of wood machining, our company has developed new technics for various materials machining and blades manufacturing, especially for rotary cutter and surfacer knife for veneer machining. By using new material, new technics, this blade has the characters of impact resistance, wear resistance, long-term sharpness and convenient maintenance, deeply loved by users both in home and oversea.
1, The table for leading international high-intensity, and vacuum adsorption countertops, wood materials for the electrical and high adsorption power can be strong adsorption of different materials. 2, Leading Rack Drive, fast, high efficiency, air-speed can reach 35 m / min or more, against the wave plate is carved in manufacturing can be up to 20 m / min above the speed equivalent to the purchase of 4 -- 5 ordinary type machines. 3, Intelligent protection work table: Prevention of misoperation or software errors, and so on the surface may cause damage. Intelligent processing of cross-border protection: preventing processing format over the layout design of mechanical collision caused the phenomenon. 4, Fully in line with international standards: can use any CAD / ArtCAM software and other relief. 5, Advanced DSP control handle, control automatically processing multiple levels 3 D. To carry out rapid, smooth 3D processing, carving or cutting. Offline operation can be realized. 6, The overall program structure welding tempering aging treatment, is not strong deformation. Gantry mobile, fixed working table can be arbitrary processing work table material. 7, Suitable for a variety of materials processing large quantities of production. Performance Parameter: DM-M25 X,Y working area 1300mm*2500mm Z working area 220mm Table Size 1480mm*3000mm Max. Speed 25m/min Work-holding by suction CPU DSP/100MHZ Interface USB Command G code*.u00*.mmg*plt Power 1840W Work Mode Steper Work voltage 380V/50Hz Spindle power 4.5kw Power vacuum pump 0-18000rpm/min Spindle rotating speed DSP. Packed in wooden case; groose weight is 650 kG Machines' dimension is 1300*2500*200mm.
1.High speed style . Adopt thicken square pipe for whole structure , high speed gear wheel and Italy air cooling spindle. 2.Wood working area : waving board , cabinet door , solid wood door , craft wood door , no-paint door , folding screen , craft window , shoe polisher , game machine cabinet , Ma-jiang Table , computer table and panel type funiture . 3.Advertising Area : making advertising products made from Brand Board , Acryl cutting , mould and some other material . 4.Mould Area : Metal mould eg ,engraving copper , aluminium and iron, and nonmetal mould eg scagliola ,sandstone , plastic board , PVC pipe , wood sheet etc . 5.Other area : art and craft area , embossment and engraving photo. Performance Parameter: DM-F1325 X,Y working area 1300mm*2500mm Z working area 220mm Table Size 1440mm*3000mm Max. Speed 20m/min Work-holding by suction CPU DSP/100MHZ Interface USB Command G code*.u00*.mmg*plt Power(not include the spindle) 1840W Work Mode Steper Work voltage 380V/50Hz Spindle power 3kw Spindle rotating speed 0-24000rpm/min Surroundings for software DSP. Packed in wooden case; groose weight is 520kg.
This is an thermic fluid dryer inside temperature required is 200 degree celsious
Features: M42 hss edge, a spring tempered alloy backer. Hardness 66-68rc. Advantages: High heat resistance. Shock and wear resistant teeth. Fatigue resistant. Benefits: High productivity. Longer life than carbon. Quick tooth penetration. Applications: For general purpose cutting of ferrous metal, tool steel, solids, shapes, tubing and structural shapes. Wood case.
Precise two rollers coater Features 1, specially designed for painting of such boards as floor window shutter and furniture as well as table boards.Leaves a smooth and piant film of good appearance without any paint piling. 2.Both conveyer belt and silica get tyre driven by imported motor, adopts frequency convertor to adjust the speed, get aprecise control of the smoothness of paint and thickness of paint film. 3.Mobile silica get tyre can be easily installed or replaced can accurately positioned, the height Can read form the meter, so as to allow you to know the different thickness of boards, thus facilitate your operations. 4.Electro light tyre and scraper allow you to select different working modes to facititate your operations.5.Choose to provide with 5 sets actuator or choose to go together with the plc the each set can use alone, process extremely accurate.Oroces Model lzdt1300 Coating width 1300mm Feeding speed 5-30m/min Peeding power 1.5kw Coaling roller power1.5kw x2 Smooth roller power 0.75kw x2 Heating power 3kw Total motor power 9kw Overall dimensions 1600x2450x1300mm Weight 1500kg
Priming paint sander Priming paint sander is mainly used for uv pu lacquered sanding .It is one of the equipment machine for floor board.Furniture ect. Technical data: Working width 600mm Working thickness 2.5-100mm Speed of abrasive belt ¦Sµ¦¦˜d· Speed of conveyor belt 6-30m/min Size of abrasive belt 1560*600mm Working air pressure 0.5mpa Total motor power 5.6kw Volume of suckta air 1000m /h Overall dimensions(lxwxh) 1500x1100x1750 Weight 1000kg
Priming paint sander Working width 600mm Working thickness 2.5-100mm Speed of abrasive belt ¦Sµ¦¦˜d· Speed of conveyor belt 6-30m/min Size of abrasive belt 1560*600mm Working air pressure 0.5mpa Total motor power 5.6kw Volume of suckta air 1000m /h Overall dimensions(lxwxh) 1500x1100x1750 Weight 1000kg
Double-unit wide-belt sander Working width 900mm Working thickness 2.5-100mm Speed of obrasive belt 18m/s Speed of conveyor belt 6-30m/min Size of abrasive belt 1620x600mm Working air pressure 0.5mpa Total motor power 28kw Volume of sucktd air 1000m /h 1850x1400x1800mm 1850x1400x1800mm
Double-unit wide-belt sander Double-unit wide-belt sander can sand the following boards intensively or according to the required Thickness;solid-wood board, veneer.Flakeboard, fiberboard.Semi-density flakeboard, Affixed flakeboard, semi-density flakeboard, affixed flakeboard, affixed air board, Air board, affixed veneer.Etc
Three-unit wide-belt sander It can sand the following boards intensively or according to the required thickness;solid-wood board, veneer.Flakeboard, fiberboard.Semi-density flakeboard, affixed flakeboard, semi-density flakeboard, affixed flakeboard, affixed air board, air board, affixed veneer.Etc Max working width 610mm Max working thickness 100mm Speed of obrasive belt 18, 18, 12m/s Speed of conveyor belt 6-30m/min Size of abrasive belt 1560x610mm Total motor power 11, 7.5, 7.5kw Volume of sucktd air 1500m /h Overall dimensions(lxwxh) 2200x1100x175mm Weight 2100kg
A special spraying equipment with high automatization. Equipped with press wind and exhaust system and double filters system. Exactly scan the width and length of workpiece;Automatically adjust the spraying range of the gun. Adopt OMRON PLC system and touching screen, chief control electric parts adopt SCHNEIDER brand. Transport belt adopts special material with anti-abrasion and anti-cauterization.Transport speed is adjusted by inverter to reach differeent speed. With special cleaning and reclaiming system.
Woodworking machinery-profile spraying machine Automatic profile spraying machine is a special machine for spraying slightness work piece.This machine has high automatization; symmetrical spraying surface;accurate control;high producing efficiency and high cost performance. It is suitable for uv, pu, pe, nc.Etc.It has uv lacquer reclaiming equipment to reduce waste. It can work independently and also can achieve a perfect effect when it is equipped to make the workpiece dried as soon as spraying finished With line drier.
