Basic Characteristics Appearance: slightly yellow transparent liquid Ionic: slight cationic PH value: 4.5-6.5 Solubility: can be dissolved in water at any ratio Hand feeling: special soft, smooth Features And Advantages This product is the end of epoxy silicone oil and ammonia ether polymerization (solvent is ethylene glycol monobutyl ether, solvent content of 40%), and finally add the end of epoxy polyether chain derived multi-copolymer block silicone oil emulsion, especially suitable for processing polyester and wool fibers, feel the characteristics of special sponginess, good soft and smooth; also suitable for cellulose fiber, nylon and other blended fabric feel finishing; Mixed with M-100A and 9905A silicone oil products, especially suitable for a variety of polyester velvet, wool blankets, chemical fiber lace and other fabric feel finishing,Meet the needs of customers fluffy, soft and smooth comprehensive effect. Mixed with M-100A and 9906A silicone oil products, especially for poly-cotton, cotton knitted fabric finishing; Dilution and use the method This product is 50% solid content of high concentration emulsion, can be used directly, or better using after thinning, the recommended ratio can be diluted 1 : 2.5 (20% solids) or 1 :5 (10% solids) , do not need to adjust the PH value; After thinning, you can use exhausting method and continuous padding method, Exhausting method: the dosage (20% solids) 2-4% (owf), temperature 30-40 , 15-30min, bath ratio 1: 20-40; Padding method: the dosage (20% solids) 20-40g / l, 120 pre-bake, 150-180 Package And Storage 50kg or 200kg plastic drum.Should be stored in a cool ventilated warehouse, to prevent exposure, storage period of half a years.
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are exporter of Ferro Silicon. FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Silicon metal #3303 Si:99.0%min. Fe:0.3%max. Al:0.3%max. Ca:0.03%max. Size:10-100mm,90%min. In plastic woven bags of 1 mt each. Ferro silicon, ferro silicon powder, ferro silicon briquette.
Silicon Metal 441 (Powder)
Ferro Silicon (FeSi)
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We offer superior quality sponge iron that is also known as direct- reduced iron. Our offered sponge iron is made for high grade, 65-70 fe Min fem-80%, fet-90-92%, s-0.04% max. Loose in form of lumps. Sponge iron filter material In industry through a sponge iron production equipment is widely applied iron phosphorus reduction method, method of reduction of iron ore concentrate, etc., the rolling iron phosphorus or ore concentrate after reduced iron press down into pieces, into the roasting tube into the kiln roasting, produce the high quality reduced iron. Sponge iron filter material for the first time into the deaerator, must first after backwashing, remove the sponge iron residue on the surface of the filter material float ash impurities.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
corrugated silicone tube is widely used in medical industry, it is able to withstand high temperature like autoclave sterilization. silicone is a good material to pass the medical test like bio-compatibility test.
High quality silicone foam tube for medical, consumer and industrial application. It has outstanding heat-resistant air aging performance, strong sealing, ozone resistance, and is moisture-proof.
Our company alba grups ltd.is producer: essential oils: rose oil, lavender oil, mentha pipperita oil, yarrow oil, roman chamomile oil, german chamomile oil,hyssop oil, helichrysum oil, juniper berry oil, pine oil, melissa oil, geranium oil, clary sage oil, salvia officinalis oil, oregano oil, rosemary oil, thyme oil, coriander seed oil, siberian fir oil, jasmine oil. flower waters: rose damascena water,rose alba water, lavender water,juniper berry water, frankincense water, helichrysum water wormwood water, mentha pipperita water, pine water, gernium water, salvia officinalis water, clary sage water, oregano water, rosemary water, thyme water, jasmine water absolutes: rose absolute , lavender absolute, beeswax absolute, oakmoss absolute concrets: rose and lavender dried hers: rose dmascena and rose alba flowers, lavender flowers, juniper berry, tilia flowers, rosehip berry,rosehip seeds and more dried herbs from bulgaria..
Soybean Oil Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 - 141 Saponification Value: mg HOH/g: 180 - 200 Unsaponifiable Matter: %
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
REFINED SUN FLOWER OIL Sunflower Oil Vegetable Oil Soybeans Oil corn oil canola oil Private label orders are welcomed. Origin: Tanzania Inspection is allowed at the factory. Languages: French, German, English, Packaging is available in all consumer packs. Available packaging: 1L, 1.8L, 2L, 3L, 5L, 10L, 20L, Flexi tank.
Used cooking oil Measurements shall be carried out after extraction from the lower part. 1) Total acid number - Less than 5 (Test Method - KS M ISO 6618) 2) Iodine water - g 12/100g (Test Method - KS M ISO 12937) 3) Water and Sediment - Weight % -More than 100 (Test Method - KS H ISO 3961) Water average: Lower layer result x 0.05 + Upper layer result x 0.95 FFA: Max 5% MI&U: Max 2% Iodine Value: min. 90 Sulfur: less than 30ppm
GENERAL TECHNICAL SPECIFICATION SOYBEAN OIL Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
It's a non-volatile oil pressed from the seeds of the sunflower and is commonly used as an oil for frying. ... It's a non-volatile oil pressed from the seeds of the sunflower and is commonly used as an oil for frying. Refined Sunflower Seed Oil Product sunflower oil Processing Refined Transparency without lees Smell and taste depersonalized oil odourless Color number,mg of iodine â?¥ 10 Acid value,mg kon/g â?¥0.25 Mass fraction of not fat admixtures,% Absence Peroxide value,�½ O2 Mmol/kg â?¥ 2.0 Mass fraction of moisture and volatiles content,% â?¥ 0.10 Mass fraction of phosphorus-containing substances in terms of stearooleoletsytyn,% Absence Our sunflower oil corresponds to the Premium grade. Ideal for frying and for salads. This is a good nutritious food product rich in vitamin E, as it is produced by cold pressing without chemical extraction. In the refining process, chemical solvents are also not used, which leaves the oil even after refining very rich in vitamins and vegetable fats with a minimum oxidation index, which gives an shelf life of up to 18 months. I am sure you will be glad to have in your arsenal our competitive oil at a price corresponding to quality.
GENERAL TECHNICAL SPECIFICATION Specific gravity: 0.916-0.922 Refractive index: 1.465-1.475 Heavy metals, Method: 0.001% max Iodine value: 120 â?? 141 Saponification Value: mg HOH/g: 180 â?? 200 Unsaponifiable Matter: %
Specification: Free Fatty Acids (% As Palmitic) : 5.0% Max. Moisture And Impurities (AOCS Ca 2c-25) : 0.1-0.25% Max. IODINE VALUE (Wijis) (AOCS Cd 1-25) : 50-55 Min. SLIP MELTING POINT (AOCS Cc3-25) : 33-39 C Max. COLOUR (Lovibond 5.25 cell) : 3.5R/3.5Y Max. DOBI : 2.31 Min Purity and freshness are the highlights of Crude Palm Oil, which we make available. This Crude Palm Oil is processed hygienically as per the set rules and regulations. We are rated as a dependable Manufacturer and Exporter of Crude Palm Oil. Packing Size: 1) PET Bottle 0.25L, 0.50L, 1L, 2L, 3L, 5L 2) HDPE Jerry Can 1L, 2L, 3L, 5L, 8L, 10L, 16L, 18L, 20L, 25L 3) Big Mouth HDPE Jerry Can 10L, 16L, 18L 4) Tin Can 16L, 18L, 20L 5) Steel Drum 190kgs 6) Plastic Drum 190kgs 7) Bag In Box 20L 8) Flexi Tank 21MT Quality:CP6, CP8, CP10
