Solvent based modified bituminous rust proofing , waterproofing emulsion incorporating elastomers and reinforcing agents.
PROPERTIES
Colour : black
Solids : 70 ± 2%
Specific gravity 1.40 at 25 C
Theoretical Coverage 3 5 m2/lit (@ 70u M)
DRYING TIME : AT 25 T
To touch: 15 min
To Recoat: 2 hours
Max.overcoat interval: Not applicable
Vehicle type: bitumen coal tar
Flash Point: 35C.
Tollens Solvbit imparts outstanding weather and light chemicals resistance. Surface has to be primed with Tolokote bitumen emulsion, if the surface is very dry or porous. The dry film provides a durable, flexible coating, which will not brake under severe climatic conditions. Typical range: -10C - +70 C
Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
Geo Textile Netting made of Natural Coco Fiber in White or Brown Coir. (Machine or Hand woven). Used to control Soil Erosion, at work sites, road construction areas, river banks etc.. as a protective measure/Mesh. Can be used as backing for hydro seed spraying.
Specifications
Mesh Hole size : 20mm x 20mm or 30mm x 30mm or (As per buyer’s requirement for any pattern and size)
Supplied in rolls any length and any width (up to 2 meters of maximum width).
Akfix C900 is polyester injection mortar for general purpose for solid and hollow supports having a short cure time. It is suitable for use in concrete, perforated bricks and cavity blocks in a wide range of applications.
Suitable for solid and hollow structures.
High solid content.
Easy to extrude and to inject.
Thixotropic, can be applied in vertical and horizontal direction.
Fast curing.
Food ingredients, animal feed raw materials, and chemicals used in many fields, including construction, petroleum, mining, agriculture, printing, rubber, detergent, etc.
.
SBR Latex URP (Universal Repair Polymer) is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. Its used to repair of spilled concrete floor, columns, beams, roofs, water tanks, toilets & bathrooms, small terraces etc. It bonds strongly to old & new concrete and to plasters. Its reduces shrinkages, prevents cracking, improves abrasions resistance.
AREA OF USAGE:
PLASTER AND PLASTER PLATE
ROAD COATING
SOIL CONDITIONER -
FERTILIZER
SPECIFICATIONS:
DRY SOL�°DS @60C %60 -90
DRY SOLIDS @250C %60-90
W.S P205 % 2 MAX
UNREACTED P2O5 % 1.5 MAX
CO.CRYST.P2O5 % 1 MAX
T.P2O5 % 4.5 MAX
SO3 % 48 - 55
CaO % 33 - 41
Na2O % 0.35 MAX
Fe2O3 % 0.30 MAX
Al2O3 % 0.40 MAX
K2O % 0.02 MAX
MgO % 0.03 MAX
Sio2 % 11 MAX
F % 2 MAX
CI PPM 700 MAX
ORGANIC MATTERS % 0.5 MAX
Our product (ProBond-SS) is a water-based polymer product that can help in:
* dust and sand control
* Reduce Construction Cost
* Reduce Maintenance Cost
* Reduce Environmental Impact
* Fast results
The product can be used in:
* Stabilization and dust control of open desert sand.
* Polymer Sand road alternative to asphalt.
* Dust control on construction sites.
* Dust and erosion control of highway embankments and pipeline embarkments, railways, helipads, and pedestrian walkways.
Platina Hi-Gloss is an aluminium oxide paste for final polishing of direct or
indirect anterior and posterior resin restorative materials. It contains
potassium nitrate topical desensitizer for patient comfort.
INDICATIONS
Final polishing of composite restorations or veneers
PRODUCT BENEFITS
Non splatter-non drying formula
Spearmint flavored
With potassium nitrate topical desensitizer
Light Cured Radiopaque Calcium Hydroxide Paste
Cal LC is light cured radiopaque calcium hydroxide paste useful in pulp capping
and as a protective base/liner under dental filling materials, cements & other
base materials.
INDICATIONS
For direct & indirect pulp capping
Acid protection when applying etch technique
As cavity liner under all filling materials
PRODUCT BENEFITS
Time-saving, direct application and light curing
Ready to use one component material
Acid Resistant
Effective protection of the pulp
Light Cured Radiopaque Calcium Hydroxide Paste
Cal LC is light cured radiopaque calcium hydroxide paste useful in pulp capping
and as a protective base/liner under dental filling materials, cements & other
base materials.
Helps formation of secondary dentine
Excellent adhesion to composites
High compressive strength
Low solubility in oral fluids
Product Description
ZHUOJUN® polyvinyl alcohol powder, also known as ZHUOJUN® PVA, is slightly off-white to beige stable non-toxic water-soluble macro-molecular synthetic polymer, which is made from vinyl acetate through the polymerization and saponification and quickly dissolves in water to form a stable colloid. It exhibits excellent water solubility, bonding strength, film forming properties and chemical stability.
Chemical Properties
ZHUOJUN® PVA can be regarded as a linear macro-molecular polymer with a secondary hydroxyl group. The hydroxyl group in the molecular of the PVA powder has high activity and can carry out typical chemical reactions of low alcohols, such as esterification, etherification, acetalization, etc., and can also react with a variety of inorganic or organic compounds.
Typical Applications:
- various construction mortar
- dry powder render/putty
- tile adhesive
- gypsum spray plaster binder
ZHUOJUN® PVA Advantages:
-Improves bonding strength
-Improves smoothness and surface gloss
-Improves oil resistance and abrasion resistance
-Improve film forming properties and chemical stability
Technical Data
Model No. PVA2488-01A
Degree of Polymerization 1750±50
Saponification Value (mol %) 86.5-88.5
Viscosity (mPa's) 45.0-55.0
Volatile Matter (%) â?¤5.0
Sodium Acetate Content (%) â?¤1.5
pH Value 5-7
Particle Size (μm) 120-180
Application Various Construction Mortarï¼?Dry Powder Renders and Tile Adhesiveï¼?Gypsum Spray Plaster Binder; Suitable for wall, ceiling finishes and tile fittings
Packaging
A.Standard packed in 25 KG per paper plastic composite bag
B.Big bags or other special packages are possible on request
Weight/20' container: approx. 16 metric tons with pallets, approx. 18 metric tons without pallets
Storage
Stored in its original packaging in a dry and place with temperature below 30
Warranty
It is recommended to use ZHUOJUN® PVA powders within 6 months.
If not caked under prolonged storage, they can still be usable.
Notes
The unused ZHUOJUN® PVA powders have to be sealed to avoid moisture in contact with air.
We offer :
ISE MEL-101 is a powder form superplasticizer of a sulphonated polycondensation product based on melamine. Is especially optimized forplastification and water reduction of cement andcalcium sulphate based materials, e.g.
