Water Hose Introduction: Flexible Stainless Steel hose for water are used for the tubing connection between water heater, shower, valve, and other water providers in building with advantages of anti-cautery, temperature flexibility, high pressure resistant, well-sealed, bend freely, install easily, good-looking and durable. Specification: Item No.DNMin.Bend R.-mmMax Bend timesWorking pressure-MpaThread size SL94151/23025f_1.8G1/2 SL94203/44020f_1.6G3/4 SL942515015f_1.2G1
Shale oil and gas exploitation fracturing hose It is mainly used for long-distance large flow high-pressure transmission of fracturing fluid during shale oil and gas exploitation by hydraulic fracturing method, as well as the return of contaminated liquid pumped back from the underground to the sewage treatment plant. Shale oil and gas exploitation fracturing hose, shale oil gas fracturing water supply hose, shale oil gas fracturing hose, flat polyurethane shale oil and gas exploitation hose, shale gas fracturing hose, shale oil and gas exploitation fracturing water supply large-diameter polyurethane hose Features: high strength, long length, large caliber,puncture resistance, low extension, low expansion, etc. Large transportation flow, convenient connection, good weather resistance and chemical resistance, can adapt to different landforms, is flat when not in use, easy to roll up, small storage and transportation volume, and the use temperature is - 50 70 Optional lining: polyurethane (TPU), special rubber Optional structure: double layer Customized process: add fluorescent strips and metal wires
Jet a1, en590 diesel, crude oil .Connect buyers and sellers
Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,.Buying office, oem, components sourcing, value added services
CR03 Jet A1, EN590 FOB CI DIP Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan FOB CI DIP & PAY Transaction Procedure 1. Seller mandate issues SCO, buyer issues official ICPO including buyer company certificate and buyer international passport to the seller. 2. Seller Acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and return back Commercial Invoice (CI) along with Tank Storage Agreement (TSA). 3. Seller provides Buyer with the Below Listed PPOP: a) Certificate Of Origin b) Dip Test Authorization (DTA) c) Injection Report (IR) 4. Buyer endorse DTA with his Tank Farm or Extend Seller Tank to enable Buyer receive full GPS coordinates of the tanks, Hub Numbers, Terminal Access Permit to dip test in Seller Tank and obtain fresh SGS Report. 5. After a successful Dip Test in Sellers tanks, Buyer takes over sellers tank or Seller injects into buyers vessel / Tank and the buyer makes the payment for the total value of the product injected into the tanks through the means of MT103-TT. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. The seller pays all Intermediaries involved in the transaction Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.
CR02 Jet A1, EN590 CIF ESCROW PROCEDURE Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan CIF ESCROW PROCEDURE 1. Buyer issues LOI, seller issues FCO for buyer to sign and return with following below: a) Buyer official Irrevocable Corporate Purchase Order (ICPO). b) Buyer company certificate of business incorporation/ registration. c) Buyer Company comprehensive profile. d) Buyer�¢??s Copy of identification materials (international passport). 2. Seller issues SPA to buyer for review/countersign forward back to seller with acceptance letter, and seller issues Product Passport/Company Certificate and appoint Escrow Company in USA for both parties to sign Escrow agreement. Both parties pay consultation costs (1) to the attorney law firm before an escrow agreement can be drafted. 3. Seller and Buyer sign Escrow agreement and buyer makes 10% Escrow deposit of total value products for one shipment and Seller schedules shipment, ships out the cargo to the buyer destination port and sets of Full POP documents below to buyer/delivery documents send to buyer below; All party sign NCNDA/IMFPA. a) Certificate of Authenticity. b) Bill of Lading. c) Q88. d) Packing List Certificate. e) Export Clearance Permit. f) Insurance Policy. g) Commercial Invoice. h) Company registration certificate. i) Certificate of origin GOST. j) Passport of the Product. k) Commitment to Supply. l) Statement of Availability of the Product. m) Export clearance Affidavit. n) Registered, Legalized, Approved SPA. 4. Transaction certificate for 12 months which gives the BUYER the legitimate approval to purchase oil products from the Republic of Kazakhstan for yearly contracts. 5. The Buyer makes the product payment in full via MT-103/TT and Escrow company return 10% Escrow deposit to buyer. Seller transfers the Title Ownership to the Buyer Company and the Seller pay commissions to all involved via NCNDA/IMFPA.
CR01 Jet A1, EN590 Tank To Vessel Procedure Jet A1 $84.00 EN590 $540.00 Origin: Kazakhstan Tank To Vessel Procedure (TTV ROTTERDAM PORT) NOT NEGOTIABLE. 1. Buyer issues official ICPO including buyer company certificate and buyer international passport to the seller 2. Seller acknowledges Buyer ICPO and issues Commercial Invoice, Buyer signs and returns back Commercial Invoice (CI) along with, all parties sign NCNDA/IMFPA; a) Charter Party Agreement (CPA) b) Pipeline Injection Agreement (PIA) 3. Seller provides Buyer with the below listed PPOP: a) Certificate Of Origin (COO). b) Local Dip Test Analysis Result Report (Equivalent to SGS). c) Injection Report (IR). d) Tank To Vessel Injection Agreement (TTVIA) to be endorsed by Buyer Pipeline Company. 4. Buyer endorses TTVIA with his Pipeline Company or transfers Title to the buyer's name to facilitate physical verification and dip test of the product in seller tank before Injection into vessel. 5. After a successful Dip Test in Sellers tanks, Buyer Pipeline Company starts Injection into the Buyer Vessel or Seller injects into buyers vessel and the buyer makes the payment for the total value of the product injected into the Vessel through the means of MT103-TT. 6. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. 7. The seller pays all Intermediaries involved in the transaction and close the transaction. Transaction Procedure TTO/OPL/STS 1. Buyer accepts the seller's offer/Procedure, and Buyer will issue an ICPO, CP and Passport Copy. 2. The seller will issue MOU, Cargo Marine Insurance Bid Bond to Buyer for Securing the Vessel and Title Transfer ownership. All parties sign NCNDA/IMFPA. 3. Seller Issues: a) Bill of Lading b) Q88 c) CERTIFICATE OF ORIGIN d) CERTIFICATE OF QUALITY AND QUANTITY (Q&Q) at the Loading port. 4. Buyer pays 1% of the product amount for Cargo Marine Insurance Bid Bond to secure the Vessel and Transfer Title Ownership OR pays $195,000 for Authorization to Board the Vessel at the Destination port as the vessel arrive. Note: Buyer does not have the right to Dip Test the product they have not secured. 5. The seller will issue the following POP documents and order the re-routing of the vessel to the buyer's desired port and transfer the title to the potential buyer's company's name. a) Product Passport (Quantity & Quality Dip Test Analysis Report) b) Certificate of Origin c) Commitment to Supply d) Ullage Report e) Cargo Manifest f) Vessel Q88 g) Title Transfer Invoice h) Fresh SGS Report i) Injection Report 6. The vessel will arrive at the discharge port, and the buyer will carry out the CIQ/SGS inspection. Upon successful inspection, the buyer will make the full payment for the product to the seller through MT103 T/T.