Water Soluble Fertilizer Npk 20 20 20+Te Suppliers and Manufacturers

Van Iperen WS NPKs are top quality blends made from the purest raw materials, with limited caking sensitivity and with high level EDTA-chelated micro-nutrients for fertigation or foliar application. Van Iperen WS NPK | 20 - 20 - 20 + TE is part of our Low pH line. Our Low pH line was developed using specific acid technology that will drop the pH of the final product. This gives the formulation an increased efficiency in alkaline waters thanks to the buffering of bicarbonates with acid, for higher plant assimilation of all elements including micro nutrients. As Nutrient Use Efficiency remains our main concern at Van Iperen, we try our best to come with adequate solutions for all situations. Improves root and shoot growth, vegetative growth and gives high quality buds and fruits Micronutrients 100% chelated and fully available Developed for fertigation in open field and greenhouses. Also suitable for foliar application Produced in a broad range of intense colours, to distinguish the product and the final solution

NPK 15 15 17 Fertilizer NPK 20 20 20 and DAP Fertilzers packaed in 9.5KG/25KG/50KG PP woven bag with PE liner; packaged in 500kg/1000kg/1250kg jumbo bag lined with PE bags inside; packaged customized as per clients' request chemical Granular 2 - 4mm npk suspension fertilizers Delivery Time:15 days

The notation NPK 12-12-17+MgO+TE refers to a type of NPK fertilizer, and each number represents the percentage of a specific nutrient in the fertilizer. N (Nitrogen): 12% â?? Nitrogen is essential for the vegetative growth of plants, including the development of leaves and stems. P (Phosphorus): 12% Phosphorus is important for root development, flowering, and fruiting. K (Potassium): 17% Potassium is crucial for overall plant health, disease resistance, and various physiological processes. MgO (Magnesium Oxide): This component provides magnesium, an essential element for photosynthesis, enzyme activation, and the formation of chlorophyll. TE (Trace Elements): This represents various trace elements or micronutrients that are required by plants in smaller amounts. These may include elements like iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), molybdenum (Mo), and others. So, in summary, NPK 12-12-17+MgO+TE is a fertilizer formulation with a balanced ratio of nitrogen, phosphorus, and potassium, along with magnesium and trace elements. As Ark Global Kimya, we do NPK Fertilizer 12-12-17+Mgo+TE wholesale and export in Turkey

The NPK fertilizer with the formulation 15-15-15+MgO+TE contains specific percentages of three major nutrients nitrogen (N), phosphorus (P), and potassium (K) as well as magnesium oxide (MgO) and trace elements (TE). N (Nitrogen): 15% Nitrogen is crucial for promoting vegetative growth, including the development of leaves and stems. P (Phosphorus): 15% Phosphorus is essential for root development, flowering, and fruiting. K (Potassium): 15% Potassium is vital for overall plant health, disease resistance, and various physiological processes. MgO (Magnesium Oxide): This component provides magnesium, an essential element for photosynthesis, enzyme activation, and the formation of chlorophyll. TE (Trace Elements): This represents various trace elements or micronutrients that plants require in smaller amounts. The specific trace elements included can vary but may encompass elements such as iron (Fe), manganese (Mn), zinc (Zn), copper (Cu), molybdenum (Mo), and others. In summary, the NPK 15-15-15+MgO+TE fertilizer is a well-balanced fertilizer that provides a combination of essential nutrients to support various aspects of plant growth and development. As Ark Global Kimya, we do NPK Fertilizer 15-15-15+Mgo+TE wholesale and export in Turkey

Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size

1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so

3ply face mask comfortable for user. The face mask is latex free and use brand new hypoallergenic material, odourless and lint free. Product Disposable 3-Ply Non-Woven Face Mask with Ear Loop Size 18cm x 9.5cm (18cm after expended) Color Blue/Green/White/Yellow/Pink or can be customized Outer Layer Spund-bound PP Nonwoven: 20 - 25 gsm Filter Medium Meltblown PP Nonwoven: 18 - 20gsm Inner Layer Lint free ES Nonwoven: 25 gsm Nose Piece Aluminum Packaging 50 pieces per box or 50pcs per bag; 10 boxes/bags per carton. 1600 cartons/20 ft container , 3200 carton/40 HQ container. MOQ 50,000 pieces min order Quantity: 10,000PCS/Day MOQ : 10,000 pieces Packaging: 50 pieces per box/bag; 40 boxes per carton. Payment condition: TT Shipping Duration: 7 Days ( ONE WEEK) Origin: Thailand/China Condition: Subject to availability

Name : Weed control mat/Ground cover/ 1. Weight 2oz/sm - 14oz/sm or 60gsm-150gsm 2. Width 1.6' -20' or 0.5m-6m 3. Roll Length 16', 33', 65', or 5m,10m,20m,25m,50m,100m or as required 4. Color Black,Green,Black-green or as required 5. Weave 8*8,10*10,11*11,12*12,12*16 6. Material 100% PP material 7. UV resistance 3-5 years 8. Sample Avaliable 9. Delivery time About 20 days 10. Min order No limit 11.Terms of payment 1.TT or LC 12. Supply capacity 500 tons per month 13. Packing In rolls with paper core inside and polybag outside or in Carton or as your request 14. Quantity 1x20ft container can load about 11 tons 1x40'HC can load about 26 tons 15.Export market Australia,Canada,Argentina,USA,The Middle East,Europe market ,Japan and so on.

Jumbo Bags : Name : Big bag/Bulk bag/Jumbo bag/FIBC/Super sack/Ton bag Raw Material : Polypropylene virgin material Color : White, blue, Beige, or whatever Printing : Onside or both sides in multi-colors,offset print color print Size : As the customers requirement Type of bag : U-panel,Circular,baffle Weave : 10x10,12x12,can be customized or as the customer requirement Denier : 700D to1000D Weights/m2 : 120gm to 240 gm or as the customers requirement Feature : Breathable and airy, anti-static, UV stabilization, reinforcement dust-proof, moisture- proof Sealing : Single/double fold saw bottom Top Filling : Top full open,top skirt,top filling spout Bottom : Flat bottom,discharge spout Saftey factory : From 3:1 to 6:1 Liner : coated or with liner bag for moisture proof Usage : sand,cement, chemical,mineral,sugar,food,flour,etc. Packing : 20pcs/bundle(bale), or as the customized MOQ : Above 1000pcs Delivery Time : 20-30 days after place an order Trade Term : FOB Payment Term : T/T