Vmc300 3 Axis Small Cnc Machining Center Suppliers and Manufacturers

We Provide Tmt Brand or Private Logo All Type of Cnc Machines as Below 1. Horigantal Turning Centre 2. Verticle Turning Centre 3. Vertical Machining Centre 4. Spm for Special Type of Activity 5. Double Coloumn Vmc 6. Grinding Machines 7. All Type of Industrial Machines

We are a supplier of used and new Heidelberg printing machine, parts and consumables globally , we acknowledge the demand of offset products and we want to fill that gap by bringing to the world the best affordable quality offset products.

Product Name: CNC Lathe Detailed product parameter description: Product model: CKD6150 Parameters\Device Name CNC lathe (Dalian CKD6150) Travel X axis (mm) Workbench 1040 Maximum cutting length 1000 Travel Y axis (mm) Travel Z axis (mm) 500 Load-bearing capacity(KG) 600 discs, 1500 shafts Accuracy IT6-IT7 Surface roughness Ra1.6m Maximum workpiece length (mm) 1040 Maximum cutting diameter of vertical tool holder (mm) 500 Maximum cutting diameter on vertical tool holder slide (mm) 300

Product Name: CNC Lathe Detailed product parameter description: Product model: Dalian CKA6180 Parameters\Device Name CNC lathe (Dalian CKA6180) Travel X axis (mm) Workbench 1000 Maximum cutting length 1000 Travel Z axis (mm) 800 Load-bearing capacity(KG) Disks 1200 Shafts 2500 Accuracy IT6-IT7 Surface roughness Ra1.6m Maximum workpiece length (mm) 3000

Product name: Large CNC lathe Detailed product parameter description: Product model: Shenyang CAK80285D Travel X axis (mm): worktable 3000 maximum cutting length 2850 Travel Z axis (mm): 800 Load-bearing capacity (kg): disc 1200 shaft 2500 Accuracy: IT6-IT7 Surface roughness: Ra1.6m Maximum workpiece length (mm): 3000 Maximum cutting length (mm): 2850 Maximum cutting diameter of vertical tool holder (mm): 800 Maximum cutting diameter on vertical tool holder slide (mm): 480

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

Product Name: Vertical Machining Center Detailed product parameter description: Product model: VM640 VM640 standard configuration: VM640 Select Accessories 1. High rigidity machine tool body 1. Chip removal machine 2.GSK-990MA servo system 2. The fourth axis 3. Spindle servo unit 3.FANUC OI MATE MD servo system 4. BT40 spindle, main motor power 5.5/7.5kw 4. Spindle oil cooler 5. Maximum spindle speed 8000r/min 5. Automatic measuring device for tools or workpieces 6. All-inclusive protective structure 6. Robotic tool magazine (16 stations) VM432 VM640 Workbench size (mm) 320-1100 400-1000 Working stroke (mm) 450-270 350 600-400-500 Maximum load(Kg) 300 500 Spindle center to column guide rail (mm) 300 420 Spindle end to worktable surface (mm) 100-450/100-500 100-600 Spindle specifications NT40/BT40 BT40 Tool magazine specifications BT40 BT40 Tool magazine capacity 3/10 16/20 Spindle speed (r/min) 4500/8000 8000 Spindle power(Kw) 3.7/5.5 4.0/5.5 Drive screw 3205 3205 Knife Cylinder(T) 3.5 3.5 Couplings KTR KTR Spindle bearings HRB/NSK NSK Screw bearings HRB/NSK HRB/NSK Repeat positioning accuracy (mm) ±0.005 ±0.005 Positioning accuracy(mm) 0.015 0.015 Fast moving (mm/min) 8000 â10000 Shell type Semi-enclosed/fully enclosed Semi-enclosed/fully enclosed Lubrication system automatic automatic Cooling system(W) Standard Standard Total weight (Kg) CNC system GSK, KND, SIEMENS, MISUBISHI, FANUC

Product name: Imported vertical machining center Detailed product parameter description: Product model: Doosan Mynx545/50 Travel X axis (mm): 1020 (work table) Travel Y axis (mm): 510 (bed saddle) Travel Z axis (mm): 625 (spindle head) Work table size (mm): 1200*500 Load bearing (kg): 800 Accuracy: Position accuracy +0.005 mm/full repeatability +0.002mm

Product name: Large CNC flame and plasma cutting machine Detailed product parameter description: Product model: Shanghai Jinfeng KG-350*9 Travel Z axis (mm): 6-300 Conventional -350mm Extreme thickness Table size (mm): Effective cutting width 2700*length 7000 Accuracy: Theoretical linear positioning accuracy +0.2mm/10m, linear repeatability accuracy +0.4mm/10m Surface roughness: Rz (um) = 70+1.2a Maximum workpiece length (mm): 300*2700*7000

Black Pepper Oleoresin Botanical: Piper nigrum Family: N.O. Piperaceae Hindi Name: Gol Mirch General Description: The best Pepper of commerce comes from Malabar. Pepper is mentioned by Roman writers in the fifth century. The plant can attain a height of 20 or more feet, but for commercial purposes it is restricted to 12 feet. The plant is propagated by cuttings and grown at the base of trees with a rough, prickly bark to support them. Between three or four years after planting they commence fruiting and their productiveness ends about the fifteenth year. The berries are collected as soon as they turn red and before they are quite ripe; they are then dried in the sun. Geographical Sources: Black pepper is native to Malabar, a region in the Western Coast of South India; part of the union state Kerala. It is also grown in Malaysia and Indonesia since about that time when it was found in the Malabar Coast. In the last decades of the 20th century, pepper production increased dramatically as new plantations were founded in Thailand, Vietnam, China and Sri Lanka. The most important producers are India and Indonesia, which together account for about 50% of the whole production volume History/Region of Origin: In South India wild, and in Cochin-China; also cultivated in East and West Indies, Malay Peninsula, Malay Archipelago, Siam, Malabar, etc. Varieties -> in trade, the pepper grades are identified by their origin. In India -> The most important Indian grades are Malabar and Tellicherry (Thalassery). The Malabar grade is regular black pepper with a slightly greenish hue, while Tellicherry is a special product. Both Indian black peppers, but especially the Telicherry grade, are very aromatic and pungent. In the past, Malabar pepper was also traded under names like Goa or Aleppi. Cochin is the pepper trade center in India. In South East Asia, the most reputated proveniences for black pepper are Sarawak in Malaysia and Lampong from Sumatra/Indonesia. Both produce small-fruited black pepper that takes on a greyish colour during storage; both have a less-developed aroma, but Lampong pepper is pretty hot. Sarawak pepper is mild and often described fruity. Description: Oleoresin Black Pepper is the natural extract of dried tender berries of Piper Nigrum Linn of family Piperaceae. Manufacturing Process: It is obtained by the solvent extraction of Black Pepper and the solvent traces are removed by distilling it in vacua at controlled temperature. Physical Appearance: It is a yellowish brown viscous liquid with pungent slightly biting aroma of Black Pepper.

The manufacture of both granulated and powdered garlic is the same, except for the grinding or powdering process. Granulated garlic is coarse while garlic powder is ground extra fine. Whole cloves of garlic are peeled, cleaned and then sent into a machine that slices and chops them into smaller sections. The sections are dried in slow ovens for three to four hours. When the garlic has cooled it is ground to the desired consistency, be it granulated or powdered. The finished products are put through sifters to separate any debris or undesirable pieces. Both are packaged in air-tight containers and stored in a cool, dry place. Granulated and powdered garlic are used to season and enhance the flavor of many foods. Often it is an appropriate substitute when fresh garlic is called for in a recipe. Powdered garlic dissolves almost instantly when incorporated into any dish, hot or cold. Granulated garlic takes a few minutes to become incorporated and release its flavor. We can offer Garlic Granules in 0.5mm to 1.0mm, 40/60 mesh, 26/40 mesh - 20 FCL: 10 Mt (Flakes/Cloves), 14-15 Mt (Minced/Granules/Powder) - 40 FCL H/C: 20 Mt (Flakes/Cloves), 25-30 Mt (Minced/Granules/Powder) Product Packing - 12.5/13/14 Kg Paper Bag inside 1 Poly Bag - 20/25 Kg Cartoon inside 1/2 Poly Bag - 20/25 Kg Cartoon inside 1/2 Aluminium Foil Bag Our range includes: - Dehydrated Garlic Flakes/Cloves (5-10mm) - Dehydrated Garlic Minced (1-3mm, 3-5mm) - Dehydrated Garlic Granules (G1, G2, G3) - Dehydrated Garlic Powder (80-100 mesh) -

Lovage-, Levisticum officinale, is a perennial herb that looks like parsley and is in the parsley, or Apiaceae, family, like anise, dill, caraway, cumin, and fennel. Lovage is native to mountainous areas of southern Europe and Asia Minor. It is sometimes called sea parsley. Lovage (Levisticum officinale) is a plant, the leaves and seeds or fruit of which are used to flavor food, especially in South European cuisine. It is a tall (3 to 9 ft) perennial that vaguely resembles its cousin celery in appearance and in flavor. Lovage also sometimes gets referred to as smallage, but this is more properly used for celery. Herb (Levisticum officinale) of the parsley family, native to southern Europe. It is cultivated for its stalks and foliage, which are used for tea, as a vegetable, and to flavour foods. Its rhizomes are used as a carminative, and the seeds are used for flavouring desserts. Oil obtained from the flowers is used in perfumery. The French call lovage céleri bâtard, "false celery," because of its strong resemblance to that plant. Lovage has been used since Greek and Roman times for everything from a seasoning, to a curative for maladies ranging from indigestion to freckles, to a love potion. It grows up to 7 feet high and has large, dark green, celerylike leaves. The flavor of the pale stalks is that of very strong celery. The leaves, seeds and stalks can be used (in small amounts because of their potent flavor) in salads, stews and other dishes such as fowl and game. The stalks can be cooked as a vegetable. Dried lovage leaves and chopped or powdered stalks can be found in natural food stores and gourmet markets. The seeds are commonly called celery seed. Lovage is also called smallage and smellage. lovage, tall perennial herb (Levisticum officinale) of the family Umbelliferae (parsley family), native to the mountains of S Europe and cultivated elsewhere. Its aromatic fruits are used in soups and as a flavoring for confectionery and for some liqueurs. An aromatic oil extracted from the roots has been used medicinally and also for flavoring. The edible leaves are usually used like celery. Lovage is classified in the division Magnoliophyta, class Magnoliopsida, order Apiales, family Umbelliferae.

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. â?¢ Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2. Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement.