Description Te261 visual fault locator is visible red laser source for finding breaks and tight bends in optical fibers. Te261 generates red laser and the visible red laser that escaping from optical fibers makes testing and finding breaks in lans, verifying continuity, checking the validity of patch cables or looking for cracked fiber in splice cases, bad connectors, and tight bends in fiber cable. Paper carton, 0.5kg
Mtrj visual fault locator This mtrj universal visual fault locator is ideal for both singlemode and multimode mtrj patchcord/cable plant inspection. Breaks, bad splices, tight crimps, faulty splice and bad connection can be identified by means of visible red laser emitting from vfl. Individually packed with pouch
Central Wavelength 650nm±10nm Emitter Type FP-LD Output Power 1mw or 10mw Optical Connector 2.5mm universal connectorFor 1.25mm connectors, FC-1.25mm Hybrid adaptor can be optional on customer requests Operating Model Both CW and Pulse(2Hz) available Power Supply Two AAA alkaline batteries Battery Operating Time 650nm@1mw 45hours;650nm@10mw15hoursTest with Panasonic LR6 AAA ALKALINE battery Operating Temperature -10~+60 () Storage Temperature -25~+70 () Dimension (mm) 115*45*27 Weight 50g(Without Batteries)
Features Rugged construction providing shock, dust and moisture resistance Dual monitor position with automatic image orientation Automatic arc calibration and iber identiication User-selectable iber clamping method sheath clamp or fiber holders Auto-start tube heater feature Color LCD display with anti-relective coating for excellent visibility in bright sunlight Simultaneous battery charge and splicer operation Long life battery (up to 160 splice/heat cycles per charge) Detachable work table incorporated into the transit case Data and video download software and splicer upgrade software included; software upgrades through PC application via the internet Green friendly RoHS & WEEE compliant Specifications Model FSM-60S Applicable Fibers SM(G.652),MM(G.651), DS(G.653),NZ-DS(G.655) Cladding Diameter 80 um to150 um Coating Diameter 100 um to 1000 um Fiber Cleave Length 8 to 16mm with 250um coating diameter, 16mm with 900um coating diameter Typical Average Splice Loss 0.02dB with Sm, 0.01dB with mm, 0.04dB with DS, 0.04dB with NZDS Splicing Time Typical 9 seconds with standard single-mode fiber Arc Calibration method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available Splicing modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera core alignment data Storage of Splice Result Last 2000 results to be stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation Magnification 300X for single X or Y view, or 187X for X and Y view Viewing method Dual cameras with 4.1 inch TFT color LCD monitor Operating Condition 0 to 5,000 m above sea level, 0 to 95 % RH and -10 to 50°C respectively mechanical Proof Test 1.96 to 2.25N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 30 seconds with FP-03 sleeve, 35 seconds with FP3(40), 35-55 seconds with Fujikura micro sleeves Protection Sleeve Length 60mm, 40mm, micro Splice Cycles with Battery Typical 160 cycles with power save functions activated Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11, 13.2V DC with BTR-08 battery Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater Wind Protection Max. wind velocity of 15m/s. (34 mph) Dimensions (W × D × H ) 136 × 161 × 143 mm; 5.3 × 6.3 × 5.6 inches Weight 2.3 kg (5.1 lbs) with AC adapter; 2.7 kg (5.9 lbs) with BTR-08 battery.
Feature Locate the fault of naked fiber optic cable and connector. Constant output power, adopt unique laser driving circuit 650nm red laser, lighter, stronger penetrability, able to penetrate Avoid OTDR blind zone Fiber optic cable tracking, locate the fault place Continuous and impulse two modes of radiation, impulse modulation frequency: 2HZ The head of laser source is drop proof, more safe. 160mm x 26.5mm.
Product Description TLD1500 Series is high quality of Optical Fiber Checker. It contains the most advanced laser technology and microelectronics technology, and can be measured with various fiber optic adapter with 2.5mm common Interface. It is very convenient for them to check the single-mode and multimode fiber. Features High visible red laser output Easy-to-use "quick access" interface Small size, light weight, high reliability Battery for power supply Suitable for all 2.5 mm optical fiber connector Applications Fiber production and research devices Fiber network testing and maintenance Optical communication teaching and test
It adopts advanced pas fiber adustment technology . Adopt four motors drive, have fiber Adjustment function, it is not only used for fttx project, but also can be used for the trunk Line, it is a machine which is the smallest volume , the lightest weight , the most fast splicing Speed Weight 1.54kg (without battery), 1.82kg (including Battery), including attachments packing gross Weight: 5.38kg Size 150d¡¨¢130w¡¨¢126h(mm)
You can diagnose and repair simple fiber link problems with our visual fault locator-cable continuity tester. The laser-powered cable continuity tester locates fibers, verifies continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. Long battery life for hours of use.
JX9010 is an optical fiber fusion splicer with a brand new design. With powerful functions and super low splicing loss, it is highly competent for construction of trunk lines and FTTx. Lightweight and compact, it is easy to use even in confined space. The novel fiber imaging system makes the image clearer. The real-time embeded Operating System provides a friendly man-machine interface and abundant functions. According to clients needs.
Handheld OTDR is the newest instrument designed for testing FTTx network According to clients needs.
Hand held fiber microscope, visual fault locator, cable continuity tester.
Fusion Splicer, Optical power meter, Visual Fault Locator.
Measuring range: salinity: 0-32% brix Determines the amount of dissolved salt and dissolved solids Approved by strict quality and safety standards Durable and built to last long Heavy-duty and lightweight with its aluminum construction Easy to focus and calibrate Accurate testing results guaranteed Made with the highest and finest quality of aluminum & rubber that makes it lightweight Cushioned with soft & comfortable non-slip rubber Extremely easy to use and calibrate
Key features 5 inches high resolution colorful lcd display, image can be turned according to position average splice time: 10 seconds average tube-heat time: 30 seconds lithium battery: rechargable and up to 200 times of continuous splice and heat after fully charged x or y axis separately views with 360 times magnification, or simultaneously 220 times cutting-edge technology for image processing new developed technology providing strong wind and dust resistance splicing mode: auto & manual & full-auto usb port storing 6, 000 groups of latest splice results new technology of fiber core alignment, enhanced accuracy new 3-in-1 cutting fixture for drop cable, pigtail & bare fiber (patented technology) new multipurpose 1+n fixture (patented technology) * 1+n: one 3-in-1 fixture ( for drop cable, fiber optic pigtail, bare fiber) & optional fixtures ( for sc/lc/fc connector).
Optical power meter, visual fault locator, optical fiber identifier, optical light source, cable tracker.
Hand held refractometer, ph meter, fiber microscope, visual fault locator, gem refractometer, jewellery led loupe.
Fusion splicer, OTDR, fiber cleaver, light source, power meter, visual fault locator, fiber identifier.
Fusion splicer, OTDR, optical power meter, laser source, fiber identifier, visual fault locator.
Handheld fiber microscope can check out depression , scratches, contamination and other conditions on FC / SC / LC fiber optic jumpers/pigtail quickly, the image of fiber end is very clear, it is applied to optical fiber communications and other industries. It not only can test PC end , but also can test APC end;it is an important fiber inspection equipment for operator/engineering contractors which proceed field operations and work on laser printing/ platemaking maintenance. Model number:SDF-400X SDF-200X/400X:Dimension(LWH ):22539.556mm Weight(KG):0.65 Fiber Microscope with universal"slip-grip"adapter
2.Features: ï¼?1ï¼?.Sturdy and light weighted copper body ï¼?2ï¼?.High quality and accurate testing result ï¼?3ï¼?.ATC Compensation Range (i.e. Built-in Automatic Temperature Compensation System) ï¼?4ï¼?.Easy and very convenient to use
