Vinyl Flooring Production Scrap Regrind Suppliers and Manufacturers

Size : 181x1220 mm, 230x1220 mm, 230x1524 mm

SPC is short for stone plastic composite or stone polymer composite, which is a good material and makes SPC floor one of the most popular interior floors. The SPC floor is rigid core vinyl flooring, which has an ultra stable core, 100% waterproof. The click system makes it DIY friendly for anyone. There are many popular timber grains, which will satisfy interior design, generally used in domestic houses such as bedrooms, living rooms, bathrooms, kitchen, and commercial houses such as offices, libraries, kindergartens, hotels. Slip-Resistant Safety is a top priority when it comes to flooring, and SPC flooring excels in providing a slip-resistant surface. The textured finish of SPC flooring enhances its grip, reducing the risk of slips and falls, even when the floor is wet. This makes it a suitable choice for high-traffic areas, commercial spaces, and homes with children or elderly individuals. With SPC flooring, you can have peace of mind knowing that the floor is designed to prioritize safety without compromising on style

WPC flooring is best known for waterproof. It is luxury vinyl flooring amped up a notch with a special waterproof core that makes it perfect for just about any room in the house. WPC is one of the best flooring types in the vinyl flooring world today and hugely popular among homeowners looking for the look of traditional hardwood without the maintenance. It is also one of the most popular flooring options for commercial spaces and businesses.

LVT Peel and stick is specifically designed for an easy installation, directly onto a smooth floor. The adhesive bottom layer provides excellent adhesion to the substrate. LVT Peel and stick is installed without the use of additional adhesive by simply removing the protective film, and placing the flooring where you want. Then, press firmly from the center to the edges. Immediately after the installation of the self-adhesive luxury vinyl flooring, you can use your room as normal and enjoy the new environment that you have created. This installation is simple, easy and straightforward.

Stone plastic floor, also known as stone crystal floor and SPC floor, is a kind of PVC sheet floor. The surface is covered with a super abrasion-resistant polymer PVC wear-resistant layer. At the same time, it has the properties and characteristics of wood and plastic. This kind of floor has good strength and toughness. Because of its practicality and high cost performance, it is very popular in Europe, America and other countries. SPC is short for stone plastic composite or stone polymer composite, which is a good material and makes SPC floor one of the most popular interior floors. The SPC floor is rigid core vinyl flooring, which has an ultra stable core, 100% waterproof. The click system makes it DIY friendly for anyone. There are many popular timber grains, which will satisfy interior design, generally used in domestic houses such as bedrooms, living rooms, bathrooms, kitchen, and commercial houses such as offices, libraries, kindergartens, hotels. The area of forest cover is declining year by year. The forest is particularly valuable for human life. We cut down the tree to produce solid wood flooring, the decorative material of life. But we have an alternative: SPC flooring is contemporary engineered flooring. The raw material is stone and polymer composite, and there is no woodland. Advanced printing technology supports 3D graphical visualization and 4K clarity for each film type. The wood pattern is also similar to real wood, with different colors and annual rings of the tree.

PS Regrind Mix Color In Big Bags. Materials are clean. No foreign bodies inside. Post industrial. Can load in 1x40'HC container aprox. 24 MT.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

LDPE Pellet Floor Sweeps Plastic Scrap MATERIAL : LDPE pellet floor sweeps CATEGORY : LDPE TYPE : pellet GRADE : floor sweeps SPECIFICATION : "The material is a floor sweep of a film manufacturer. Some boxes can have mix with small % of masterbatch and PA. The material is all good. MSM FI should be between one and two" ORIGIN : US LOADING WEIGHT : 25 MT CNF (USD/Ton) : 800-1000$ Asia main ports

From game machine. 100% ABS No other material.

HDPE Jerrycan Regrind Plastic Scrap MATERIAL: HDPE Jerrycan Regrind CATEGORY: HDPE TYPE: Regrind GRADE: Mix SPECIFICATION: Post-industrial; Blow grade; Made from jerry can; MFI 0,22 g (230 C/2,16kg/10min); Humidity 0.02% and; Impurity

2Lians can supply Plastic scrap product as below: PET Preform Regrind Transparent Plastic Scrap MATERIAL: PET Preform Regrind Transparent CATEGORY: PET TYPE: Preform Regrind GRADE: Transparent SPECIFICATION: No impurities ORIGIN: Japan LOADING WEIGHT: 18 Tons FOB (USD/Ton): 900-1100

HDPE Pallet Regrind Plastic Scrap MATERIAL: HDPE pallet regrind mixed color CATEGORY: HDPE TYPE: Pallet regrind GRADE: Mixed color SPECIFICATION: HDPE regrind mixed color from pallet manufacturer, washed, regular supply ORIGIN: Japan LOADING WEIGHT: 20 Tons FOB (USD/Ton): 700-900

2Lians can supply below PC regrind: PC White Regrind Scrap For Recycling MATERIAL: PC white regrind CATEGORY: PC TYPE: white GRADE: regrind SPECIFICATION: PC white regrind from Pachinko machine, no coating, only white color Origin: JP LOADING WEIGHT: 20-25 Tons FOB (USD/Ton): 2100-2300

MATERIAL : PET Sheet regrind clear color CATEGORY : PET TYPE : Regrind GRADE : Clear SPECIFICATION : Post industrial IV : 76 100% no impurity, moisture ORIGIN : Australia LOADING WEIGHT : 22 Tons FOB (USD/Ton) : 400-550

PET Bottle Regrind Clear and Green Mixed Plastic Scrap MATERIAL: PET Bottle Regrind Clear and Green Mixed CATEGORY: PET TYPE: Regrind GRADE: Blow SPECIFICATION: Unused and unwased. Clear and Green mixed, Sometimes little amber. No cap or any mixed items. IV: 0.65 ORIGIN: US LOADING WEIGHT: 18 Tons FOB (USD/Ton): 400-600

PP Pallet Regrind Plastic Scrap MATERIAL: PP Pallet Regrind CATEGORY: PP TYPE: Regrind GRADE: Black SPECIFICATION: Regrind from pallet ORIGIN: UAE LOADING WEIGHT: 24 Tons FOB (USD/Ton): 700-800