Find Verified Video Optic Transceiver Suppliers, Manufacturers and Wholesalers

Video optic transceiver

1.Support point-to-point connection
2.Digital broadcast transmission without compressing and damaging
3.No mutual interference of frequency modulation. phase modulation and amplitude modulation
4.Support video regenerated delay without loss.
5.Compatible with PAL, SECAM and NTSC video standard
6.Support any high-resolution video signal
7.Support simultaneous transmission of video. audio. data. Ethernet telephone signals
8.Gigabit fiber transmission technology. high capacity. easily upgrade
9.Provides single mode or multi-modes fiber transmission. Distance0-100 kilometer
10.Dedicated ASIC design and high speed DSP Technology
11.Fiber technology of WDM / CWDM / DWDM Advanced adaptable technology and no regulation
12.Surface Mount Technology

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

Olympus CV-170 Video Processor / LED Light Source


About Us
Endoscopic Resources specializes in sourcing excellent new and pre-owned medical equipment. We are a qualified repair center and guarantee the equipment we sell.

Please contact us if you have any questions, comments, or concerns. We will respond within 1 business day and do our best to help you out! We want to be sure you are completely satisfied with your purchase.

Contact now

We are an EU approved CE certified, REACH Certified and RoHS Certified company manufacturer of Optical Brighteners OBA 220 for Paper Industry.

We all want our papers to be as white as possible, don't we? Well, that's where optical brightening agents BBU Powder come in.

The raw material of paper often consists of impurities such as snippets of bamboo sticks and wood. These impurities dampen the brightness of the paper.


We have various Whitening Agent Optical Brightener Available for Paper application like...

Optical Brightening Agent OBA 220 in powder form Optical Brightening Agent OBA 220 in Liquid form Optical Brightening Agent OBA 264 in Liquid form Optical Brightening Agent OBA 24 in powder form Optical Brightening Agent OBA 253 in Liquid form Optical Brightening Agent OBA 28 in powder form Optical Brightening Agent OBA 154 in Liquid form Optical Brightening Agent OBA 28 in powder form.

Additional Information

Physical Appearance : Greenish-Yellow Powder

CAS No.: 16470-24-9

EINECS No.: 240-521-2

Specific Gravity / Bulk Density : 0.8-1.0

pH of Liquid or 1% Solution : 8-9

Strength by 100% : 100%

Shade/Hue: Bluish white

Whiteness/ Brightness : Equal to Std

% of Active Substance : 21.95%

Absorbance (18mg/l) : 0.217

Moisture Content : 2.40%

BrightOmni UP is a Disulpho type Fluorescent Whitening Agent with high affinity for Paper in wet end applications to achieve high whiteness and brightness properties of Paper.
It Can be added either batch wise in the mixing chest or continuously at suitable dosing points in the stock preparation system.
It Should be applied prior to either alum or cationic auxiliaries.
Typical average dosage is 2 - 6 kg/Ton of dry pulp depending on:
- Type of furnish
- Base pulp pH and brightness
- Desired brightness and whiteness gain

Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.

3 in 1 Digital Camera,
Take it with you everywhere
PC Camera, Digital Camera, Digital Camcorder

Laundry Detergent Optical Brightener 71 CXT DMS CAS 16090 - 02 - 1 Optical Brightener Powder For Soap Making and For Detergent Powder Production Line,For Laundry Detergent Making For Washing Powder Soap Making, synthetic washing powder, soap, toilet soap, etc. Brightener CXT can make the appearance of soap and washing powder white and bleaching. For example, CXT was added into washing powder according to achieve the whitening effect of washing clothes, or just make the detergent looks crystal clear. Fluorescent brightener CXT is used for whitening cotton fiber, nylon and other fabrics. It has excellent whitening effect on man-made fibers, polyamide and vinylon.

Cybervision CHM-4K series Ultra HD-SDI optical transceiver consists of optical transmitter CHM-4KT and Optical receiver CHM-4KR for transmitting 1 channels 4K ultra HD-SDI signal , or 4 channels 3G ultra HD video, and downward compatible with SD-SDI with bit rate of 143, 177, 270, 300, 1485Mbps etc.

With circuit reducing the signal jitter at CHM-4KR, it can deal with the distorted signal well, it can provide more than 120m automatic balance for 3GMbps signal, more than 250m for 270Mbps signal.

With built-in distribution amplifier, CHM-4KR provides 2 channels output.

CHM-4K supports SMPTE178 standardpassed the test of SDI pathology.
Features:
1. Supports SMPTE424M, SMPTE292M, SMPTE259M
2. Supports 3G-SDI/HD-SDI/SD-SDI/DVB-ASI
3. The best solution for live casting by connecting with 4 channels 3G-SDI
4. With cable equalize at the input/Output, it can make up the loss of cable transmission
5. With circuit reducing the signal jitter, it can deal with the distorted signal well. Input/output cable transmission distance can be up to 120m@3G (BELDEN8281 cable)
6. LCD at both transmitter and receiver show working status, it is convenience to operate and maintain:
1) Optical interface type;
2) laser working wavelength;
3) transmitting/receiving optical power;
4) working temperature;
5) input/output working status of each channel signal;
6) voltage of dual power supplies for main board;
7. With clear working status, there are LED indicators on panel for input SDI signal, optical signal, power supply.
8. Supports SMPTE178 standardpassed the test of SDI pathology
9. Dual power suppliers can be selected, which can supply power independently, backup redundantly
10. Network management can be selected, support SNMP and web monitoring

Properties
1. Excellent transparency, outstanding resistance to aging.

2. It has good insulating properties and mechanical strength; to acid, alkali, salt has a strong resistance to corrosion; and because easy processing.

Applications
1.Extruded sheets for signage, displays and building material

2.Motive parts such as tail lamps, meter covers and sun visors

3.General sundries such as tableware, kitchenware, giftware and bathroom accessories

4.Optical lenses such as sunglasses, reading glasses and camera lenses

5.Light guide panels for LCD displays

6.Other applications such as mobile phone display panels, clock covers, lighting covers/accessories, optical fibres, toys, etc.

Scunoe is a professional fiber optical components manufacturer in China.
which is offering a best quality range of Fiber Optic patch cord .

Features: UPC?APC?Simplex / Duplex
Types: SC FC ST LC MTRJ E2000 MU MPO etc
Polishing : UPC , APC
Single Mode , Multi Mode , OM3(10G)
The dia of cable : 0.9mm, 2.0mm, 3.0mm
Multiple option of Optic Cable Core,Simplex,Twin cores,4 Cores,6 Cores,12 Cores,24 Cores, 48 Cores

Return Loss:=50dB(UPC/PC)=65dB(APC)
Insertion Loss : Single mode:PC=0.3dB, UPC=0.2dB, APC=0.2dB, MTRJ=0.5dB; Multi-mode:PC=0.3dB,
Repeatability:=0.2dB
Frequency of Usage:=1000Times

Duplex LC connector
Commercial temperature rang -40C-85C (optional)
10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
Maximum link length of 120Km
Single 3.3V power supply
Standard bail release mechanism
RoHS Compliant Products Available.

Inner Communication System Optical Transceiver
Introduction
CA-D inner communication system can construct an optical transmission system by connecting with the equipment with some distance fiber; it can realize the function to transmit multi-channels audio and data signal in two-way via one fiber, extend the transmission distance of ClearCom and Drake brand inner communication system

Features:
1. Support Clear-Com and Drake Brand Inner Communication System
2. Transmitting 8 channels audio and 8 channels control data in two-way via single fiber
3. 24bit digital codec
4. Single level transmission distance can be up to 100Km (standard configuration is 40Km)
5. Large audio dynamic scaleMax. input/output audio can be up to +18dBm
6. There are LED indicators on front for input/output audio signal, optical signal, status in the equipment, and power supply

Introduction
Cybervision CGE series 3G-SDI+ Data Optical Transceiver consists of optical transmitter CGET and optical receiver CEGR, which can realize mixture transmission for profession video and standard data interface for one channel 3GSDI, dual channels 10/100m Ethernet signal and multi-channels RS485/RS422, the SDI supports the HD signal with bit rate 3Gb/s, 1.5Gb/s, and compatible with SD-SDI or ASI video signal.

With multiple bit-rates cable equalizer at electric input of CGET, and built in distribution amplifier at CGER, it can output dual channels HD-SDI (main and standby). With incomparable accuracy, and the electro circuit which can reduce the signal jitter, the equipment can deal with distorted signal well, it can provide 100m automatic balance for 1485 Mbps, 250m for 270 Mbps.

Features:
1. Meets all video standard of SMPTE 424M, support the 3G SDI video format with bit rate of 2.97 Gb/s or 2.97/1.001 Gb/s
2. Meets all video standard of SMPE 292M, support the HDSDI video format with bit rate of 1.485 Gb/s or 1.485/1.001 Gb/s
3. Meets all video standard of SMPTE 259M, support the SD-SDI video format with bit rate of 270 Mb/s
4. Meets the interface standard of DVB-ASI (270 Mb/s) and SMPTE 305M (SDTi)
5. Passed the test of SDI pathology
6. With automatically identifying SD/HD/3G bit rate, the identifying scale: 270Mb/s ~ 2.97Gb/s
7. With automatic equalizer at SDI input port, the input of 270 Mb/s can be up to 400m, 1.485Gb/s can be up to 140m, 2.97 Gb/s can be up to 120m (the testing cable is Belden 1694A)
8. Support two channels 10/100m Ethernet interface, the two ports have switching function
9. Support 4 channels RS485 or 2 channels RS422, every channel is independent.
10. The optic signal is 3 wavelength CWDM signal, the wavelength can be customized, the transmission distance can be up to 100KM.

DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION
Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature
Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for
cotton (terry-towel) & blend.
Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2
bleach.
Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2
bleach.
Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach.

TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature
Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder -- Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder (B) -- Padding & Exhaust at medium temperature
Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White BVN Powder
(BB Supra) --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White HI Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White S Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature

HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature.
Bridgeo Milky White HF Liquid
(UF AS LIQ) -- Padding and exhaust at low temperature.
Bridgeo Milky White BSU Liquid 264 Padding and exhaust at low temperature.
Bridgeo Milky White AS Powder --
Suitable for Acid Cross Linking, Padding and exhaust at
low temp, reddish tone

DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION REMARKS
Bridgeo Milky White BA 267% Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BMK Powder 113 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White SRK Powder 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BHT-HC Powder 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White BHT-HC Liquid 252 Suitable for recycled pulp at wet end at
alkaline pH.
Bridgeo Milky White UP-HC Liquid 113 Suitable for virgin and wood pulp at
alkaline pH.
Bridgeo Milky White UP Liquid 113 Suitable for virgin and wood pulp at
alkaline pH.
Bridgeo Milky White UF-UP Liquid 113 Suitable for virgin and wood pulp at
alkaline pH. Urea & Salt Free

TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Used in Waste Paper & Straw Pulp in acidic to
neutral pH.
Bridgeo Milky White ABP-X Powder 220 Mostly used in Waste Paper Pulp in acidic to
neutral pH.
Bridgeo Milky White UF-P Liquid 220 Mostly used in Pulp Board & Tissue in acidic to
neutral pH.
Urea &
Salt Free
Bridgeo Milky White ABIZ Liquid 220 Used in Tissue from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White API Liquid 220 Used in newsprint from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White ABP Liquid 220 Used in newsprint from Waste Paper in acidic to
neutral pH.
Bridgeo Milky White SI Liquid 220 Used in newsprint from Waste Paper in acidic to neutral pH.


HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Used in Size Press & Coating, at any pH. Urea &
Salt Free
Bridgeo Milky White HF Liquid -- Used in Size Press & Coating, at any pH. Urea &
Salt Free
Bridgeo Milky White BSU Liquid 264 Used in Size Press & Coating, at any pH for extra
bluish whiteness
Urea &
Salt Free
Bridgeo Milky White MST Liquid 353 In Board Machine at Coating for reddish shade Urea &
Salt Free
Bridgeo Milky White BSUT Liquid 264 Used in Size Press & Coating for violetish
blue shade
Bridgeo Milky White AS Powder -- Used in Size Press & Coating.

DISULPHO GROUP
PRODUCT NAME C.I. NO. AREA OF APPLICATION
Bridgeo Milky White BA 267% Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White SRK Powder 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BHT-HC Powder 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White WHN-C Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White WHN Powder 113 Suitable at high temperature exhaust with H2O2 bleach for
cotton, nylon, wool & silk
Bridgeo Milky White S Powder -- Tinted product for Exhaust at high temperature
Bridgeo Milky White 4BB Powder 28 Tinted product for Exhaust at high temperature for
cotton (terry-towel) & blend.
Bridgeo Milky White BHT-HC Liquid 252 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White TG Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White BA Liquid 113 Suitable at high temperature exhaust with H2O2 bleach.
Bridgeo Milky White 4BK Powder 252 Suitable at high temperature exhaust with H2O2 bleach

TETRASULPHO GROUP
Bridgeo Milky White BBU Powder 220 Padding & Exhaust at medium temperature
Bridgeo Milky White 2B CONC Powder 24 Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder -- Padding & Exhaust at medium temperature
Bridgeo Milky White BVN CONC
Powder (B) -- Padding & Exhaust at medium temperature
Bridgeo Milky White 2B Powder 24 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White 2BT Powder 28 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White BVN Powder
(BB Supra) --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White HI Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White S Powder --
Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White UF-P Liquid 220 Bleaching with H2O2, padding and exhaust at medium
temperature
Bridgeo Milky White ABIZ Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White API Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White ABP Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White SI Liquid 220 Padding & Exhaust at medium temperature
Bridgeo Milky White UBR Liquid 263 Padding & Exhaust at medium temperature

HEXASULPHO GROUP
Bridgeo Milky White AS Liquid -- Padding and exhaust at low temperature.
Bridgeo Milky White HF Liquid
(UF AS LIQ) -- Padding and exhaust at low temperature.