You can use this product for break clods on your farm/field before planting but this machine more usable in red earht or terra rosa. This machine easily turnover your fields contained minerals so your seeds easily grow up.
Helical circular mixture, fast and evenly stirring
Suitable for all kinds of plastic raw materials and color powder or granules
Fully stainless steel contacting parts, rust free and easy to clean
Installed with power control device to ensure safety
Customizable for drying type model
Vertical stirrer are able to perform even mixture for large volume of materials in short mixing time by utilizing the paddles rotation to gather the material from the bottom of dump center to the top, shed the material flow back to the bottom and complete the mixing function in short period of time .
1.Features:
·The mixer has many types. such as heating type, cooling type, vacuum type and heavier type. According to your needs, we can add a jacket in the external of the barral.
·If the material's viscosity are heavy, you can adopt to ribbon mixing method to mix the materials.
·There are two types of driven form : manual drive and pneumatic drive.
2.Application:
Conical Screw Mixer is widely used in the industry such as pharmaceutical, food, battery materials, dyestuff & pigment, chemical industry, fertilizer, rare earth, titanium powder etc.
Product features:
1. Urea crusher mainly uses the grinding and cutting of the gap between the roller and the concave plate.
2. The clearance size determines the degree of material crushing, and the drum speed and diameter can be adjustable.
3. When the urea enters the body, it hits the body wall and the baffle and is broken. Then it is ground into powder through the rack between the roller and the concave plate.
4. The clearance of the concave plate shall be adjustable to the extent of crushing by the regulating mechanism within 3-12 mm, and the feeding port regulator can control the production volume.
Product introduction:
Crop straw crusher can crush corn straw, straw, peanut skin, beanstalk, flowers and other burning residues. It avoided the burning of crop straw, protected the environment, and effectively developed renewable energy. The machine is reliable in operation, that easy to operate and maintenance. The equipment has a wide range of raw materials, and is suitable for crop residues.
Performance characteristics:
This product design is reasonable, the manufacture quality is reliable, has the structure simple, the operation is convenient, the volume is small, occupies the land little, saves the labor, saves the electricity characteristic.The designed automatic control electric heating device can adjust the dry and humidity of materials randomly, ensure the stability of discharging molding, and improve the working efficiency.The main parts of this product are made of wear-resistant material, which is specially treated, so it can be continuously pressed and durable.Suitable for all kinds of biomass raw materials (corn straw, wheat straw, cotton straw, straw, branches, leaves, sawdust and other agricultural materials as raw materials or wood.
Working principle:
Straw crusher can be matched by motor, diesel engine or 30-50 horsepower tractor, the main engine is composed of feeding mechanism, zha cutting mechanism, throwing mechanism, transmission mechanism, walking mechanism, protective device and rack.It has the advantages of reasonable structure, convenient movement, automatic feeding, safety and reliability.
Its components are as follows:
1. Feeding mechanism: it is mainly composed of feeding platform, upper and lower cao kun, fixed blade, fixed knife support base.
2, zha cutting and throwing mechanism: mainly by the moving knife, knife disc, lock screws and other components.
3. Transmission mechanism: mainly composed of triangle belt, transmission shaft, gear, universal joint, etc.
4. Walking mechanism: mainly composed of ground casters.
5. Protective device: it is composed of protective cover.
16345 Vertical Mixer Suppliers
Short on time? Let Vertical Mixer sellers contact you.
PRODUCT NAME:
Vertical Plastic Color Mixer
MODEL NO.:
AMX-25KG AMX-50KG AMX-100KG AMX-150KG AMX-200KG AMX-300KG
High quality Vertical Color Mixer, Plastic Color Mixer, Vertical Plastic Color Mixer for sale, Welcome to cooperate with us.
Note
1) The standard power supply is 3Ã? 380V 50Hz. Other power supply is available.
Application:
AMX series vertical plastic color mixers are mainly used to mix plastics material of master batch, raw materials and recycled materials. AMX plastic mixers can mix different granule and power material completely in a short time. The machines are widely used in plastic injection, plastic recycling and extrusion industry, it also be used in industry of powder metallurgy, pharmacy, chemicals, foodstuff and ceramic ware.
Features:
The mixing barrel is made of stainless steel.
Safety protection device, guarantee the safe of operator and plastic mixer machine.
Mixers work in high efficiency and low energy consumption.
24 hours timer to control the mixer working time and stop machine automatically.
Optimized designed structure makes machine easy and simple for operation, clean and maintenance.
The Dosing & Mixing series including Plastic Color Mixer, Storage Plastic Mixer Machine, Gravimetric Blender, Vertical Plastic Color Mixer, Volumetric Dosing Unit, Gravimetric Mixer Machine, Material Proportional Valve, Plastic Masterbatch Doser etc.
What is the size of the PTO shafts? PTO Shaft for PEECON Vertical Feed Mixers
When buying a new tool that comes with a PTO shaft or choosing to replace one that is old or replacing an old one, the majority of PTO shafts require to be cut to the length of both the tractor as well as the machine which is using it. This is an easy procedure we've outlined in the next steps.
Connect the implement to the tractor's 3-point linkage, but do not connect to PTO shaft.
For determining the size of the PTO shaft it is essential to determine how far the PTO shaft is from the PTO shaft of the tractor and the shaft of the PTO that is attached to it.
After you've measured it, we typically suggest taking another 75mm off the PTO shaft to create buffers to make it easier to connect. If there's any buffer in place, the shaft could restrict movement and could damage the universal joint to the PTO shaft, the tool or the tractor.
To help explain, we used the following example:
The end-to-end length for new PTO shaft is 1000mm.
The distance between the tractor's shaft of output and the implement's output shaft is 800mm.
Additional buffer = 75mm
In order to get our results from measuring then we must do these things:
PTO shaft length is The distance that is between the tractor the implement plus 75mm buffer.
1000mm - 800mm plus 75mm = 275mm. The latter is required to get removed from PTO shaft.
The easiest way for cutting to cut the PTO shaft into the right size is to split it in half, so there are both internal and external parts. There is no need to take off the cover made of plastic. In the example above the cover needs to be removed 275mm from the length which means we have to cut 295mm and 275mm steel pipes onto both the PTO shaft cover and the inner and outer components and the outer and inner parts, respectively. Begin by measuring the desired amount on the plastic cover, and mark it with the required text. Cut off any excess. Measure the amount you need out of steel pipe, and cut it using an angle grinder or hacksaw. Repeat the process for the second half of the PTO shaft.
It is important to make sure that any burrs found on the cut side of the PTO shaft are removed, so that the PTO can slide in the correct direction. Also, we recommend applying grease on each side of the PTO prior to reassembling. After rebuilding your PTO shaft, it is possible to attach it to your tractor, and then implement it.
Please note that the information above is only for reference. Diesel Machinery is not responsible for any injuries or damages to any equipment or person while measuring or cutting the PTO shaft.
A mixer grinder is a compact kitchen appliance used for mixing, grinding, and blending ingredients. It is an essential tool for various cooking tasks, including preparing dosa batter, grinding spices, making pastes, and blending liquids
* 750 WATTS.
* 3 SS JARS WITH HANDLE ( 1.5 LTR / 1.0 LTR / 450 ML )
* COPPER MOTOR
* AVAILABLE IN METALLIC AND NON METALLIC FINISH.
* BS PLUG / VDE PLUG - BASED ON YOUR MARKET REQUIREMENT.
* 3 SPEED.
* OVER HEATING PROTECTION.
* ANTI SLIP
* 3 PLY COLOUR INNER CARTON / GIFT BOX
* 5 PLY OUTER CARTON.
These are provided in a range, which includes 2 Speed With Pulse, 1.5 Ltr Juicer, 450 to 1000 Watt range and many other mixes. The said products are used for making various delicious juices such as mango, pomegranate, orange, milk chocolate shakes and many other beverages in both commercial as well as residential complexes. Our mixers are also used for grinding chutneys, spices etc. Juicer Mixer Grinders are made of using superior grade 304 SS, ABS plastic and these have high strength, stainless steel sharp blades for cutting things.
* 550 WATTS.
* 3 SS JARS WITH HANDLE ( Plastic Jar 1.5 ltr / SS 1.5 LTR / SS 1.0 LTR / SS 450 ML ) - (Option available for 2 jar or 4 jar requirement.)
* COPPER MOTOR
* AVAILABLE IN METALLIC AND NON METALLIC FINISH.
* BS PLUG / VDE PLUG - BASED ON YOUR MARKET REQUIREMENT.
* 3 SPEED.
* OVER HEATING PROTECTION.
* ANTI SLIP
* 3 PLY COLOUR INNER CARTON / GIFT BOX
* 5 PLY OUTER CARTON.
16345 Vertical Mixer Suppliers
Short on time? Let Vertical Mixer sellers contact you.
