Vanadium pentoxide catalyst Sulphuric acid catalyst (also named vanadium pentoxide catalyst) suits for that sulphuric acid plants use the contact process to promote the oxidation of so2 and o2 to give so3. Based on more than 30 yearf+s experience with sulfuric acid catalyst, our factory can manufacture several types of catalysts in different shapes and sizes, such as s101, s101-2h, s101-3mh, s101-3bz, s108, s108-2h, s108-3mh, s108-3bz, s107, s107-2h, s107-3mh, s109, s106. Our manufacturing technique is advanced. The carrier is treated by repulped stock processing, washed by hot concentrated acid, pretreatment of calcinations, and added several rare accessory ingredients, then molded by using advanced patent technology. The performance of our catalysts is excellent, with high activity, low ignition temperature, high mechanical strength, low losses of screening, and long life. As for star ring type of catalyst, it has advantage of large surface area, low pressure drop, and good resistance of dust accumulation. 125kg/steel drum
This kind of catalyst which is also named sulfuric acid catalyst, and specially used to convert sulfur dioxide into sulfur trioxide in the process of sulfuric acid manufacturing. The catalyst is filled into each bed of the convertor. Generally speaking, the convertor equipment can be classified into two large systems. Double contact double absorption and single contact single absorption. We can supply mainly two large series catalyst as below. 1). Type S101 series of broad temperature catalyst The ignition temperature is 400â??. For continuous operation, the temperature should be in the range 420-620â??, which is suitable for each bed of converter for its high and stable activity. 2). Type S108 series of low temperature catalyst The ignition temperature is 380â?? and operating temperature 400-540â??, which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission. 3). Different catalyst shape is the reason to reduce catalyst bed pressure drops which translates directly into energy savings as a result of reduced blower power consumption. Reduced pressure drops also allow more dust to accumulate before pressure drops increase to the point where the plant must be shut down for catalyst screening. The catalyst shape must achieve all of the above without compromising on catalyst activity or mechanical strength. 4). The length of catalysts can be made according to the userâ??s requirement.
We are offering two lots spent vanadium catalyst, granular, with V2O5 of 14.66% and 17.33%. Quantity : 500 mt each specification.
vanadium pentoxide catalyst, Payment Terms : T/T, Bank or Wire Transfer Upfront Upon Proforma Invoice Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well. vanadium pentoxide catalyst...
Sulphuric acid catalyst Sulphuric acid catalyst (also named vanadium pentoxide catalyst) suits for that sulphuric acid plants use the contact process to promote the oxidation of so2 and o2 to give so3. Based on more than 30 yearf+s experience with sulfuric acid catalyst, our factory can manufacture several types of catalysts in different shapes and sizes, such as s101, s101-2h, s101-3mh, s101-3bz, s108, s108-2h, s108-3mh, s108-3bz, s107, s107-2h, s107-3mh, s109, s106. Our manufacturing technique is advanced. The carrier is treated by repulped stock processing, washed by hot concentrated acid, pretreatment of calcinations, and added several rare accessory ingredients, then molded by using advanced patent technology. The performance of our catalysts is excellent, with high activity, low ignition temperature, high mechanical strength, low losses of screening, and long life. As for star ring type of catalyst, it has advantage of large surface area, low pressure drop, and good resistance of dust accumulation. 125kg/steel drum
Sulphuric acid catalyst Sulphuric acid catalyst (also named vanadium pentoxide catalyst) suits for that sulphuric acid plants use the contact process to promote the oxidation of so2 and o2 to give so3. Based on more than 30 yearf+s experience with sulfuric acid catalyst, our factory can manufacture several types of catalysts in different shapes and sizes, such as s101, s101-2h, s101-3mh, s101-3bz, s108, s108-2h, s108-3mh, s108-3bz, s107, s107-2h, s107-3mh, s109, s106. Our manufacturing technique is advanced. The carrier is treated by repulped stock processing, washed by hot concentrated acid, pretreatment of calcinations, and added several rare accessory ingredients, then molded by using advanced patent technology. The performance of our catalysts is excellent, with high activity, low ignition temperature, high mechanical strength, low losses of screening, and long life. As for star ring type of catalyst, it has advantage of large surface area, low pressure drop, and good resistance of dust accumulation. 125kg/steel drum
Vanadium Pentoxide Catalyst..
Vanadium pentoxide series of sulfuric acid catalysts can be used in the process of sulfuric acid production, to be more specific, is the process of SO2+I/2O2---SO3. With the help of Vanadium Catalyst, the rate of conversion can be improved greatly. It can guarantee the air speed of operation to add 10-20% more when using type star ring catalysts or ring catalysts. Vanadium catalyst can be applied in many fields, such as, sulfur-based acid production, pyrite-based acid production, nonferrous smelting gas-based acid production, gypsum-based acid production etc. Chinese traditional types of catalyst S101 series broad temperature and S108 series low temperature, which are equivalent to the types of BASF O4-110/O4-111, TOPSOE VK38/VK48 and MECS LP-120/LP-110 with shapes cylinder, ring, star ring and Triangular prism. Type S101 Catalyst is a medium broad temperature vanadium pentoxide catalyst to promote the oxidation of SO2 and O2 to give SO3, which is developed independently in China. This catalyst has a manufacturing history of over 40 years with high standard quality and steady performance. Advantages: This catalyst has advantages of wide applicability, broad range of temperature, high conversion and high mechanical strength. Ring or Plum Blossom Ring shaped catalysts have solved some problems with cylinder shaped catalyst, which are small pellets, high pressure drop and high energy consumption, bad resistance of dust accumulation. Type S108 Series sulfuric acid catalysts are invented in early 80sâ?? by China. The advantages of them are outstanding. In general, they are low ignition temperature, high activity in low temperature, high-resistant crushed strength etc. If can be used together with medium temperature type catalyst, such as, S101, you can make more profits; for instance, high conversion, and lowering environmental pollution. 1). Type S101 series are broad temperature catalysts which suit for every bed of converter. 2). Type S108 is low temperature catalysts which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission.
We can mainly supply three series catalyst as below, which are equivalent to overseas brands BASF-O4-110/O4-111, TOPSOE--VK38/48/59/69 and MECS-LP/XLP-120&110. Type S101(04-110/VK38/LP-110) There are four products of type S101, in details, they are S101 (Cylinder); S101-H (Ring); S101-MH (Star ring); S101-YH (Three-Ribs Cylinder). Type S101 Catalyst is a medium broad temperature vanadium catalyst which promotes the oxidation from SO2 to SO3, and it is developed by China. With 20 years of manufacturing S101 catalyst, it has reached the international advanced level. Due to its high-quality and steady performance, The advantages of S101 are as listed. Wide applicability, broad range of temperature, high conversion, and high mechanical strength etc. Ring or plum blossom shaped catalysts have solved some problems that cylinder shaped catalyst encountered; namely, they are small pellets, high pressure drop and high energy consumption, bad resistance of dust accumulation. Type S101 series are broad temperature catalysts which suit for every bed of converter. 2.Type S108: S108 Cylinder; S108-H (Ring); S108-MH (Star ring); S108-YH (Three-Rib Cylinder) (O4-111/VK48/LP-120) Type S108 Series sulfuric acid catalysts are invented in early 80s�¢?? by China. The advantages of them are outstanding. In general, they are low ignition temperature, high activity in low temperature, high-resistant crushed strength etc. If can be used together with medium temperature type catalyst, such as, S101, you can make more profits; for instance, high conversion, and lowering environmental pollution. Type S108 is low temperature catalysts which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission. 3.LS112 Type Cesium Catalyst(VK59/69/Cs120/110) Low ignition temperature; higher activity in low temperature; high-resistant crushed strength, high anti- poison; high anti- pulverization etc. LS112 cesium-promoted catalyst integrates not only the active constituent of vanadium pentoxide and the promoters of cesium and potassium salts, but also the carrier of select diatomaceous earth. Its activity under low and high temperature conditions keeps high due to the unique manufacturing process and optimized formulation. Cesium-promoted catalyst enables new opportunities for improvement in start-up time, energy efficiency of electricity throughout the operating cycle and strong reduction in SO2 emission that far lower than national standard. The product is the all-around catalyst suited for all stages in converter due to its low ignition temperature and good heat tolerance under high temperature condition. Cs series enables the compliance with pollutant emission standards due to its enhanced activity and longer service life.
Vanadium pentoxide series of sulfuric acid catalysts can be used in the process of sulfuric acid production, to be more specific, is the process of SO2+I/2O2---SO3. With the help of Vanadium Catalyst, the rate of conversion can be improved greatly. It can guarantee the air speed of operation to add 10-20% more when using type star ring catalysts or ring catalysts. Vanadium catalyst can be applied in many fields, such as, sulfur-based acid production, pyrite-based acid production, nonferrous smelting gas-based acid production, gypsum-based acid production etc.
Vanadium pentoxide catalyst.
Sulphuric acid 98% Sulfuric acid (HSO) at a concentration of 98% is one of the most widely used industrial chemicals due to its strong acidic properties and versatility. Properties of 98% Sulfuric Acid Chemical Formula: HSO Concentration: 98% (remaining 2% is water) Appearance: Colorless, oily liquid Density: ~1.84 g/cm³ (highly dense) Boiling Point: ~337°C (639°F) Melting Point: ~10°C (50°F) Corrosivity: Highly corrosive to metals, organic materials, and human tissue. Hygroscopicity: Absorbs moisture from the air, making it a strong dehydrating agent. Applications of 98% Sulfuric Acid 98% sulfuric acid is a key raw material in numerous industries due to its strong acidic and dehydrating properties. Major applications include: 1. Fertilizer Production Used in the manufacture of phosphate fertilizers (e.g., superphosphate and ammonium sulfate). Reacts with phosphate rock to produce phosphoric acid, a key fertilizer ingredient. 2. Chemical Manufacturing Production of chemicals such as hydrochloric acid, nitric acid, and sulfate salts. Used as a catalyst or reagent in organic synthesis (e.g., sulfonation, alkylation). 3. Petroleum Refining Used in alkylation processes to produce high-octane gasoline. Purification of petroleum products by removing impurities. 4. Metal Processing Pickling and Cleaning: Removes rust and scale from steel and iron surfaces. Used in the production of copper, zinc, and other metals. 5. Water Treatment pH adjustment and neutralization in wastewater treatment plants. 6. Textile Industry Used in dyeing processes and the production of synthetic fibers. 7. Battery Manufacturing Key component in lead-acid batteries (though typically at lower concentrations, around 30-50%). 8. Dehydrating Agent Used in laboratories and industries to remove water from gases and organic compounds.
Power HF Series land use Diesel generator set uses 95 and R series diesel engines of the company, among which R series introduces technology from Ricardo in Britain and forms a complete set with alternators famous at home and abroad such as Stanford and Marathon alternators. The prime power of the set is from 15 to 2000kva. The generator set powered with R Series Diesel Engine has advantages of sufficient power, low fuel consumption, low emission, low noise, and good starting performance at low temperature. Over the last 17 years, we have supplied JOHN DEERE, the world's largest agricultural equipment manufacturer, with over 100,000 units diesel engines. Over the last 17 years, we have supplied JOHN DEERE, the world's largest agricultural equipment manufacturer, with over 100,000 units diesel engines.
HF R-Series Diesel Engine for Generator Application Technical Data Sheet Engine Model XR2105D-F Prime power (Kw) 17 Type 4 strokes,watercooled in line .N.A Rating speed 1500 Highest and lowest noloading speed 1575 / 700 Combustion type Direct injection Cylinder No and type 2 / Wet liner Bore X Storke Total displacement L) 1.9 Compression Ratio 17:01 Firing order 1-2 Injection timing 10 Dry .Weight kg) 230 Direction of Rotation Counter clockwise viewed from flywheel Mechanism type OHV
Take the sulfur and burn it with oxygen to make SO2. Then, direct the stream of SO2 gas into a reactor bed with some vanadium pentoxide catalyst and extra oxygen gas to make sulfur trioxide gas which is the acid anhydride of sulfuric acid. vanadium pentoxide is added to in the contact phase of making of sulfuric acid. V2O5 acts as a catalyst at 450�¢?? where SO2 is made to react with the left over O2 in the first step. Vanadium pentoxide series of sulfuric acid catalysts can be used in the process of sulfuric acid production, to be more specific, is the process of SO2+I/2O2---SO3. With the help of Vanadium Catalyst, the rate of conversion can be improved greatly. It can guarantee the air speed of operation to add 10-20% more when using type star ring catalysts or ring catalysts. Vanadium catalyst can be applied in many fields, such as, sulfur-based acid production, pyrite-based acid production, nonferrous smelting gas-based acid production, gypsum-based acid production etc. Type S101 Catalyst is a medium broad temperature vanadium catalyst which promotes the oxidation from SO2 to SO3, and it is developed by China. With 20 years of manufacturing S101 catalyst, it has reached the international advanced level. Due to its high-quality and steady performance, The advantages of S101 are as listed. Wide applicability, broad range of temperature, high conversion, and high mechanical strength etc. Ring or plum blossom shaped catalysts have solved some problems that cylinder-shaped catalyst encountered; namely, they are small pellets, high pressure drop and high energy consumption, bad resistance of dust accumulation. Type S101 series are broad temperature catalysts which suit for every bed of converter. Type S108 Series sulfuric acid catalysts are invented in early 80 s by China. The advantages of them are outstanding. In general, they are low ignition temperature, high activity in low temperature, high-resistant crushed strength etc. If can be used together with medium temperature type catalyst, such as, S101, you can make more profits; for instance, high conversion, and lowering environmental pollution. Type S108 is low temperature catalysts which suit for 1/3 top of the first bed to decrease inlet operating temperature, and 4th bed, 5th bed to improve equilibrium conversion and decrease gas emission.
Low ignition temperature; higher activity in low temperature; high-resistant crushed strength, high anti- poison; high anti- pulverization etc. LS112 cesium-promoted catalyst integrates not only the active constituent of vanadium pentoxide and the promoters of cesium and potassium salts, but also the carrier of select diatomaceous earth. Its activity under low and high temperature conditions keeps high due to the unique manufacturing process and optimized formulation. Cesium-promoted catalyst enables new opportunities for improvement in start-up time, energy efficiency of electricity throughout the operating cycle and strong reduction in SO2 emission that far lower than national standard. The product is the all-around catalyst suited for all stages in converter due to its low ignition temperature and good heat tolerance under high temperature condition. Cs series enables the compliance with pollutant emission standards due to its enhanced activity and longer service life.
PHF4F Series Diesel Engine is a four-stroke direct-injection type high-speed diesel engine whose prototype is the new generation product of domestic diesel engine of the same type jointly developed by Ricardo in Britain and Power HF Co., Ltd.. Based on the former R4105G series diesel engine, this series adopts new electronic unit pump technology and enables itself to meet the Stage III emission standard for NRMM diesel engine. Power HF makes a matching design considering the characteristics of a bulk material semi-trailer. By making corresponding changes in some components and parts of the engine, it makes this series an ideal supporting power for large- and medium power construction machines in China. It is strongly universal with large inventory commercially available, rugged and durable, having plenty of accessories. Its reliability and service life have reached the advanced level among those of the like products in China and the top overhaul period is as long as 8000 hours.
Diesel Engine is an In-line, four-stroke, water-cooling high-speed diesel engine with a swirl combustion chamber or a direct-injection combustion chamber. Diesel Engine is improved significantly and designed based on the former 495 Series diesel engine. In this way, its power, economy, reliability and service life reach the advanced level among those of like products in and it is awarded the title of quality product and passes the reliability test. This series is named as the energy-saving internal combustion engine in Diesel Engine matches, optimizes and customizes the engine and the assembly according to the assembly configuration and the actual use; it has good supporting adaptability with multiple options for flywheel, flywheel housing and alternator available.
Vanadium pentoxide catalyst, vanadium catalyst, diesel engine and generator set.Export
We are in a position to supply germanium ingot 99.999%min (>47 ohm), if there is any interest, please feel free to contact us for more details and pricing. Carton
