Non-Pressurized Solar Hot Water Heating Solar Water Heater Evacuated Tube Solar Collector Geyser Features: 1. Cheap and reliable solution, Simple structures, Easy installation. 2. High efficiency of heating,water heated by sun light directly. 3. Withstands water pressure no more than 0.1MPa. 4. Operated without any power supplying. 5. Electric heater can be used as back-up in rainy days. 6. Hot water can be used directly, or can be used as a pre-heated. 7. Water flow in the vacuum tubes and is operated when confined. 8. Tank is equiped with electric water heater setting,automatic temperature controller(optional ). 9. the insulating layer uses polyurethane bulk bubble,keep hot water 72 hours. Specifications: 1.Inner tank: SUS304-2B,SUS316L,0.31mm,0.4mm,0.5mm 2.Outer tank:Galvanized Steel 3.Tank capacity:80L/100L/120L/150L/180L/200L/240L/250L/300L/320L/360L 4.Vacuum tube:58*1800mm Borosilicate Glass 3.3; Al-Ss-Cu Absorb Coating 5.Stand:Galvanized Steel, 1.5mm; 20-45 degree 6.Insulation layer: 50mm,55mm,60mm 7.Optional accessories : Electric heating, Intelligent controller, Mg. Rod, 3L/5L/8L assistant tank Remark: 1.Solar hot storage tank diameter(mm): 460mm,470mm,480mm 2.Thickness, insulated(mm): 50/55/60 3.Vent connection(inch):1/2'' or 3/4'' 4.Electric heater connection(mm): 47,1/2", 3/4"or 1" 5.Water connection(inch): 1/2'' or 3/4'' 6.Collector angle(degree): 20-45 degree
Inner tank: Food Grade Stainless Steel by argon protect welding, supply water quality and drinkable Outer shell: Galvanized Steel coated uncorrosion layer Heat insulation layer: 50-60mm import polyurethane integral foaming Frame: Galvanized Steel coated uncorrsion layer, both install inclined and flat roof. High Pressure Cold Water In: 6 bar cold water to tank from Feeder or Electric Auto Valve. Automatic Heating Element free 1% spare parts are free 5 years quality warranty All install documents are free Export Cartons
We're the pioneer company in the research & development and manufacturing of the solar water heaters. Consol solar is a supplier of high quality, low cost, easy to install. Solar energy superconductive vacuum collector tubes. Heat pipe has a low hot capacity, and has rapid heat exchange (it is 1000 times of copper heat exchange speed), so it is an available speediness heat exchanger. Heat exchange rate is up to 99%. The startup is fast, collect solar energy fully, at 25, 5 minutes can startup heat. At the same time, it has heat exchange unilateralism diode function system, for example: heat energy exchange is a direct progress from heat absorber to water. But it will not back up or reversal in the water. Because of matter physics effect in the heat tube and especial construction of condenser, the biggest work temperature of this system will be controlled; this particular characteristic ensures the stability under especially conditions
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20;/30;/40;/45;. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, Wood case for samples.
1. Inner Tank: o.41mm SUS304-2B food grade stainless steel (optional material: SUS316L). 2. Outer Tank: o.31mm color steel (SUS304-2B). 3. Bracket: galvanized steel plate with plastic spraying, thickness 1.2mm/1.5mm, angle 20¡ã/30¡ã/40¡ã/45¡ã. 4. Insulation: 55mm polyurethane layer. 5. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating 6. Seal material: Stabilized High Temperature Silicon 7. It resists 25mm hail. 8. Heat preservation: 72 hours Seaworthy cartons for container orders, woodcase for sample
Diameter of cooper coil: 12mm Thickness of cooper coil: 10mm Length of cooper coil: 45m There is no need to wait and hot water is available immediately Completely automatic operation Exported carton
Solar water heater Features 1) tank: Inner tankfv sus304 food grade stainless steel, thickness 0.4mm Isolation layer fv high dense polyurethane integral foam, thickness 55mm Outter shell fv zinc and aluminum coated steel sheet 2) supporting frame: Stainless steel plate with thickness of 1.2mm 3) vacuum tubes: Hard borosilicate glass tube, 30mm hailstone resistant Diameter: 58mm Length: 1, 800mm 4) echo tilt: 38, 45, 50 degree 5) system pressurized runs without pressure 6) water temperature up to 95 degree c Capacity: 1) high capacity model: 18 tubes / 252 l 20 tubes / 280 l 2) high temperature model: 20 tubes / 180 l 24 tubes / 216 l 26 tubes / 234 l 30 tubes / 270 l
Solar water heater III Features: 1) tank: Inner tankfv sus304-2b stainless steel, thickness 0.4mm Isolation layer fv high dense polyurethane integral foam, thickness 55mm Outter shell fv zinc and aluminum coated steel sheet 2) supporting frame: Galvanized steel, electrostatic powder coated 3) vacuum tubes: Hard borosilicate glass tube, 30mm hailstone resistant Diameter: 58mm Length: 1, 800mm 4) echo tilt: 38, 45, 50 degree 5) system pressurized runs without pressure 6) water temperature up to 95 degree c Capicity: 1) high capacity model: 18 tubes / 252 l 20 tubes / 280 l 2) high temperature model: 20 tubes / 180 l 24 tubes / 216 l 26 tubes / 234 l 30 tubes / 270 l
Solar water heater Features: Tank : Inner tankfv sus304 food grade stainless steel, thickness 0.4mm Isolation layer fv high dense polyurethane integral foam, thickness 55mm Outter shell fv sus304 stainless steel 2) supporting frame: Stainless steel plate with thickness of 1.2mm 3) vacuum tubes: Hard borosilicate glass tube, 30mm hailstone resistant Diameter: 58mm length: 1, 800mm Temperature resist: -30 ~ 250 degree c 4) echo tilt: 38, 45, 50 degree 5) system pressurized runs without pressure 6) water temperature up to 95 degree c Capacity: 1) high capacity model: 18 tubes / 252 l 20 tubes / 280 l 2) high temperature model: 20 tubes / 180 l 24 tubes / 216 l 26 tubes / 234 l 30 tubes / 270 l
Solar water heater I Features: 1) tank: Inner tankfv sus304 food grade stainless steel, thickness 0.4mm Isolation layer fv high dense polyurethane integral foam, thickness 55mm Outter shell fv sus304 stainless steel 2) supporting frame: Stainless steel plate with thickness of 1.2mm 3) vacuum tubes: Hard borosilicate glass tube, 30mm hailstone resistant Diameter: 58mm length: 1, 800mm Temperature resist: -30 ~ 250 degree c 4) echo tilt: 38, 45, 50 degree 5) system pressurized runs without pressure 6) water temperature up to 95 degree c Capacity: 1) high capacity model: 18 tubes / 252 l 20 tubes / 280 l 2) high temperature model: 20 tubes / 180 l 24 tubes / 216 l 26 tubes / 234 l 30 tubes / 270 l
Tank materials: Inner tank: sus304 Inner tank thickness: 0.6mm Outer tank: sus 304 or colored steel Outer tank thickness: 0.37 Insulation: imported polyurethane Insulation thickness: 50-65 Heat exchanger: copper coil Pressure resistance: 0.6mpa Advanges: pressured operation. The whole system is easily integrated into the building. From outside, it looks more nice. Standard export package
Materials: Inner tank materials: sus304-2b Inner tank thickness: 0.5mm Outer tank: the steel coated with zinc Outer tank thickness: 0.37mm Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame materials: steel coated with the zinc Frame thickness: 1.5mm Advantages: low cost hot water and good heat efficiency. Standard export package
Inner tank: sus 304 Inner tank thickness: 1.2mm Outer tank: sus 304 Outer tank thickness: 0.31 Insulation: polyurethane imported from south korea Insulation thickness: 50-65mm Frame: sus430 Frame thickness: 1.5mm Pressure parameter: 0.6mpa Conducting materials: heat tube Advantages: for the pressured operation, got more rushed hot water while bathing. Even one vacuum tube broken, the whole system can go on working. Standard export package
Specifications: 1) Tank Inner tank: SUS 304-2B (food grade) Stainless Steel. Outer tank: SUS 201 Stainless Steel. Insulation layer: Polyurethane Foaming. Heat preservation: 72h. Tank capacity: 98L ~ 300L. 2) All Glass Vacuum Tube Diameter:ª¦47, ª¦58 Length: 1500mm, 1800mm. Numbers of tube: 15, 16, 18, 20, 24, 30pcs. Hail resistance: 25mm 3) Bracket Material: SUS 201 Stainless Steel. 4) Accessories: Electric Heater, Controller, Assistant Tank, Magnesium Stick and so on. Pack in cartons
1. Inner tank: Import stainless steel SUS304-2B food grade; thickness:1.2mm 2. Outer tank: galvanized steel/Stainless steel SUS201, thickness: 0.4mm. 3. Vacuum tube: heat pipe 58x1800mm 4. The material of insulation:High-density polyurethane integrated foam-forming layer 50mm thickness 5. Frame(Bracket): galvanized steel/Stainless steel 6. Angle: As customer requirement 7. Heat preservation: 72hrs
Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L) Specialty 1. Economical type for most of area, common people can afford it 2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid 3. Mature technology and stable operation 4. Higher efficiency on photo thermal conversion. 5. Accessory is popular and easy maintenance Solar water heater Specifications: 1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm 2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm 3) Inner tank of solare water heater: SUS304 food grade stainless steel. 4) solar water heater Outer tank: Stainless steel, 0.4mm 5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L 6) Thickness of solar water heater bracket: 1.5mm 7) Glass vacuum tube of solar water heater: 58mm X 1800mm Remark: 1. Solar heat storage tank diameter(mm): 460mm/480mm 2. Thickness, insulated(mm): 50mm 3. Vent connection(inch): 1/2''or /3/4'' 4. Electric heater: 47mm 1500W, 3/4'' 5. Water connection(inch): 1/2'' or 3/4'' 6. Collector angle(degree): 25-45
1. Inner tank: Import stainless steel SUS304-2B food grade; thickness:1.2mm 2. Outer tank: galvanized steel/Stainless steel SUS201, thickness: 0.4mm. 3. Vacuum tube: heat pipe 58x1800mm 4. The material of insulation:High-density polyurethane integrated foam-forming layer 50mm thickness 5. Frame(Bracket): galvanized steel/Stainless steel 6. Angle: As customer requirement 7. Heat preservation: 72hrs
