Vacuum Insulation Oil Filtration Machine Suppliers and Manufacturers

Vacuum Insulation Oil Filtration Machine for Series ZY Vacuum Insulation Oil Purifier Vacuum Insulation Oil Filtration Machine for Series ZY Application This purifier is applied to treat various of unqualified or used insulation oils including aging transformer oil, mutual inductor oil, switch oil,cable oil. This type of Insulation Oil Filtration Machine can degas, dewater by low vacuum distillation,removing the impurities of insulating oil quickly and effectively. It improves the value of voltage value, oil dielectric strength, extends oil service life and make sure electrical equipment work safely. The power station and mine mainly use the machine to deal with transformer oil,mutual inductor oil, switch oil and cable oil. Features: 1.This machine is small, hi-efficient conveniently. And it can live operated with electrical, vacuum oiling the power equipment and dry moisture of power equipment. 2.Distinctive removing the impurities technology filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power.3. This machine adopts a high effective vacuum and the internationally advanced stereo-evaporation technology 4.The oil of any grades can be treated on line at the working site 5.This machine can work independently; also it can work with the oil regeneration system. Technical Parameter Parameters Unit ZY-10 ZY-20 ZY-30 ZY-50 ZY-70 ZY-150 ZY-200 ZY-300 Flow rate L/h 600 1200 1800 3000 4200 9000 12000 60000 Working vacuum MPa -0.06  -0.095 Working pressure MPa 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 Breakdown voltage KV 55 55 55 60 60 60 60 65 Moisture PPM 5 Gas content % 0.1 Impurity content 5 Temperature range 10  80 Power supply 50HZ380V(or as needed) Working noise dBA 61 63 70 70 75 70 70 70 Heating power KW 11 13 15 30 48 52.5 57.5 60 Total power KW 12.5 14.5 16.5 33.5 51.5 57.5 65.5 68 Inlet/outlet caliber   mm 25 25 25 32 40 50 50 60

Vacuum Hydraulic Oil Filtration Machine for Series TYH Hydraulic Oil Filtration Plant Vacuum Hydraulic Oil Filtration Machine for Series TYH TYH Series Hydraulic Oil Filtration Machine is specially used in the treatment and regeneration of fire-resistant hydraulic oil in the big and medium-sized thermo electric generator speed-governing system. It can remove free water, emulsified water ,suspended solids and dirt from hydraulic oil. Hydraulic lubricating oil treated by this machine contains so low emulsification value, few water content and impurities that it can be used repeatedly in the highly precise hydraulic lubricating equipment Enhances the oil quality, restores the lubricating oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suit for many lines, such as the mine, metallurgy, electric power, transportation, manufactures and so on. Features: 1.Strong capability of breaking emulsification, make the turbid and emulsified hydraulic oil become limpid and clear. 2.The combination of coalescing-separation filter elements and vacuum dehydrator. 3.Strong ability to filter the impurity, which can filter the particles completely. 4.It has the back flush system, which can clear impurities automatically. 5.Advanced dielectric condensation device 6.This machine installs the new pressure protector, which can control the temperature automatically; 7.We adopt the high quality filter materials, which has a good function in anti-corrosive, thermostable, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities. 8. The unique degas and dehydrator system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology. Technical specs( It will be changed as customer's requirements) Item Unit TYH-10 TYH-20 TYH-30 TYH-50 TYH-100 TYH-150 TYH-200 TYH-300 Flow Rate L/min 10 20 30 50 100 150 200 300 Vacuum Degree MPa -0.06 -0.095 Working Pressure MPa 0.4 Temperature 0 100 Power Supply 3phrase,50Hz, 380V(or as needed) Working Noise dB(A) 75 75 75 78 78 78 80 82 Heating power kW 36 40 45 72 80 90 120 135 Total power KW 38 42 47 75 87 101 135 147 Inlet/outlet caliber mm 25 25 25 32 42 50 50 60 Weight Kg 450 550 600 750 850 1000 1200 1500 Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100 Width mm 1000 1050 1050 1150 1250 1600 1700 1700 Height mm 1200 1600 1600 1700 1800 1950 2000 2100 Parameter After Purification

Vacuum Lubricant Oil Filtration Machine for Series TYA Vacuum Lubricant Oil Purifier Vacuum Lubricant Oil Filtration Machine for Series TYA TYA series Vacuum Lubricant Oil Filtration Machine is applied to recover and purify various high-precision lubricating oil,hydraulic oil, compressor oilgear oil, heat treatment oil,cutting fluids,quench oil and various industrial oils etc It can remove free water,dissolved water, free gas, acid, emulsification, and eliminate impurity, big and small particulates,dust, and foam in the waste oil. It can also eliminate metallic impurity,colloid,slude and the volatile matter (for example ethyl alcohol, gasoline, ammonia and so on). It enhances the oil quality, restores the oil viscosity, augments the flash point and improves the operational performance. Guaranteed the hydraulic system and the dynamic system, the lubrication system normal operation, so the machine is suitable for many lines, such as the mine, metallurgy, electric power, transportation,drilling and so on.  Features 1. Strong capability of breaking emulsification. 2. The combination of coalescing separation and vacuum dewatering. 3.The unique degas and dewater system: Using the Stereo-Evaporation technical, which can separate the water and gas from the oil quickly by the Multi-level water-oil separation technology. 4. Advanced dielectric condensation device  5. With H.P.M high polymeric absorbing material 6.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities. Technical specs( It will be changed as customer's requirements) Item Unit TYA-10 TYA-20 TYA-30 TYA-50 TYA-100 TYA-150 TYA-200 TYA-300 Flow Rate L/min 10 20 30 50 100 150 200 300 Vacuum Degree MPa -0.06 ï½? -0.095 Working Pressure MPa â?¤0.4 Temperature â?? 0 ï½? 100 Power Supply 3phrase,50Hz, 380V(or as needed) Working Noise dB(A) â?¤75 â?¤75 â?¤75 â?¤78 â?¤78 â?¤78 â?¤80 â?¤82 Heating power kW 36 40 45 72 80 90 120 135 Total power KW 38 42 47 75 87 101 135 147 Inlet/outlet caliber mm 25 25 25 32 42 50 50 60 Weight Kg 450 550 600 750 850 1000 1200 1500 Dimension Length mm 1500 1500 1500 1600 1750 1900 1900 2100 Width mm 1000 1050 1050 1150 1250 1600 1700 1700 Height mm 1200 1600 1600 1700 1800 1950 2000 2100 Parameter After Purification

Ultra High Voltage Vacuum Transformer Oil Filtration Machine (1000KV, ±800KV, 750KV, ±660KV project) ( two stage vacuum chamber) for Series ZYD-U Untra High Voltage Transformer Oil Treatment Plant Vacuum Transformer Oil Purifier Application: ZYD-U Series Ultra-high voltage Transformer Oil Filtration Machine with Double Vacuum Distillation is for Ultra-High Voltage transformers like 500KV, 750KV, 1000KV, it is mainly used to improve the properties of insulation oil for 66KV to 500KV project. It can remove trace water, gas, particulate matters etc. from the insulating oil effectively and rapidly so as to boost performance of transformers, circuit breakers, mutual inductors, cable and capacitors which has insulation system. ZYD-U series specialize in purifying branded oil, insulating oil of high voltage and super high voltage transformer. Additionally, it is suitable for treating low viscosity lubrication oil. Features: 1.ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine has one pot with two-stage vacuum-segregating space, it come into being different pressure so as to keep oil line balance between two stages. 2.The pump of this product is adopted vacuum-pump imported from Europe, which have preceding level in the world, and with high air pump speed so as to get high working vacuity. 3.As the new technology, vacuum-segregating employs particular spinning disk and stainless steel machine with dehydration and air pump so that enlarge the area of segregating and coming to three-dimensional evaporation. 4.Using new type of heating equipment , it can reduce heating burden and extend oil life. 5.Oil level control adopt photoelectric way which the main components is imported from Switzerland and have features of sensitive control, exactitude so much as feel the spume of oil, mount the equipment to prevent super high and super low oil level. Spurting oil phenomena is never appeared. 6.As the clients requirement, they could choose equipment which their components were all or partly imported from overseas. Include touching screen and flow gauge is can be selected according to customers. This series could meet different kinds of customers need. 7. ZYD-U series Ultra-High Voltage Vacuum Transformer oil purifying machine equips filter assemblies imported from U.S.A. and it has large filtering area, strongly absorbent-dirt capability, high filtering precision. 8. Whether clients choose the oil pump from domestic or abroad, they all must be airproofed by our factory, moreover running without noise and leakage. extended oil life

Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant for Series ZYM Mobile Trailer Type Vacuum Transformer Oil Purifier Vacuum Transformer Oil Filtration Application: Series ZYM Mobile Trailer Wheel Mounted Vacuum Transformer Oil Filtration Plant is designed for purifying used or aged transformer oil, super high-voltage transformer oil, switch oil and other insulating oils. According to fieldwork requirement, this machine equips the car wheels, which can be easy to move to any work point by traction. It is special suitable for purifying the transformer oil which locate in different fields. This machine can recover the seriously transformer oil. The treated transformer oil can reuse again in transformer. With single-axle or double-axle or wheels, able to move from one location to another in order to recondition multiple tanks/batches Features: 1. Mobile (trailer) type, completely closed structure, waterproof, dustproof, move easy. 2. Installation of car tyres, Bridge shock absorber, braking system and steel welding of entire trailer guarantee 60km/h speed. 3. Dealing with unqualified insulating oils, rapidly remove water, gas, particles from oil 4. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technologies 5. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 6. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 7. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically.

Vacuum Transformer Oil Filtration Plant Dielectric Oil Purification Machine Transformer Oil Filtration Machine Application scope ZYD series vacuum transformer oil filtration machine is a typical product, develop and produced by HOPU Oil Purifier Manufacturer as especial equipment for dehydration, degassing, purification process of various kind of insulation oils in electrical transformers and circuit breakers etc,. it is designed on vacuum drying principle, accurate fine filtration and other modern technique . Characteristics 1. Precise multi-stage filtration system adopts high quality filtering materials and big capacity of containing pollutants to remove solid mechanical impurities in the oil effective. 2. The constant electric heating system is easy to operate the oil temperature increases quickly and temperature is even and constant, suitable for different kinds of oil. 3. High quality filtration element which can resist acid, alkali and high temperature, the mechanic strength is high and service life long 4. No environment pollution function in many cases Guarantee value: Moisture PPM 5 Gas content % 0.1 Impurity size ¼1 (no free carbon) Breakdown voltage kV70 IFT dynes/cm Acid value mgKOH/g0.03 Dielectric loss factors tg´(90 C)0.001

Cooking Oil Filtration Machine for Series COP Cooking Vegetable Oil Cleaner Cooking Oil Filtration Machine for Series COP The cooking oil filtration machine is special for filtering used cooking oil, Coconut Oil,dirty vegetable oil , groundnut oil, olive oil,palm oil etc. It can remove particle ,separate moisture, gas, free fatty acids, volatile odoriferous material,odor, and wax, foam in the waste oil. The treated oil is clean, limpidity, and good smell. It is a good purification machine for Fry food factory, oil restaurant, cooking oil factory, biodiesel factory,vegetable oil factory, and waste oil collecting store. According to the treated oil usages, you can choose different machine body. For edible usage, we suggest you choose stainless steel body; For industrial use, we suggest you choose carbon steel body. If your oil contains too many impurities,we suggest you choose a press filter. Feature: 1.Strong ability to filter the impurity,strong capability of breaking emulsification. We adopt the high quality filter materials, which has a good function in anti-corrosive, thermos table, mechanical strength. Especially, the precision of eliminates impurity is high and the service life is long. Also, it has a large volume for storing the impurities. 2.The combination of coalescing separation and vacuum dewatering 3.Advanced dielectric condensation device 4.With H.P.M high polymeric absorbing material 5.Using the 3D Stereo-Evaporation technology, which can separate the odor and gas from the oil quickly . 6.This machine installs the new pressure protector, which can control the temperature automatically; also it can drain water on line by the waterseparator device. So it is easy to control this machine. Parameters Item Unit COP-10 COP-20 COP-30 COP-50 COP-100 COP-150 COP-200 COP-300 Flow Rate L/min 10 20 30 50 100 150 200 300 Work Vacuum MPa -0.06 ~ -0.095 Work Pressure MPa 0.4 Temperature 0 ~ 100 Power supply 380V,50Hz, 3 phase (or as needed) Work noise dB(A) 75 75 75 78 78 78 80 82 Heating power KW 36 40 45 72 80 90 120 135 Total power KW 38 42 47 75 87 101 135 147 Inlet/outlet mm 25 25 25 32 42 50 50 60 Net weight Kg 450 550 600 750 850 1000 1200 1500 Dimensions mm 1500 1000 1200 1500 1050 1600 1500 1050 1650 1600 1150 1700 1750 1250 1800 1900 1600 1950 1900 1700 2000 2100 1700 2100 Guarantee Value Item Guarantee indexes Moisture content 20 PPM Demulsification value New oil15min,running oil30min Impurity size 1 micron (no free carbon) Gas content 0.1% Clean degree 4 Grade (NAS1638) Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ETC. Please feel free to contact us.

Transformer Oil Filtration Machine PLC Fully Automatic Transformer Oil Purification Machine Transformer Oil Filtration Machine Vacuum Transformer Oil Filtration Plant 1. Famous brand PLC control, fully automatic operation, high precise filtering for insulating oil and transformer oil filtration. 2. Enhance the oil performace to protect the machine. 3. Low energy consumption. 4. Water content: 3ppm, impurity content: m, gas content: â0.1%. 5. Breakdown Voltage: 75KV Product Introduction This oil purification plant is applied to purify various of unqualified insulating oils including aging transformer oil, specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Features: 1. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa 2. High absorption speed: Absorption speed power 333L/Sr. 3. Duplex 3D stereo-evaporation: eliminating the liquid water quickly. 4. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 5. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power. 6. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment. 7. Especially applied to vacuum oiling and drying for power transmission equipments which are over 110KV. 8. The oil of any grades can be treated on line at the working site.

Supply vacuum transformer oil filtration machine, insulation oil purification plant, lube hydraulic oil fluids separation system, turbine oil dehydration purifier, tan reduction solutions for different.Supply vacuum transformer oil filtration machine, insulation oil purification plant,lube hydraulic oil fluids separation system,turbine oil dehydration purifier,tan reduction solutions for different

Vacuum Turbine Oil Polishing and Flushing Machine for Series TY Vacuum Turbine Oil Purification Plant Vacuum Turbine Oil Polishing and Flushing Machine for Series TY Application: TY Series Vacuum Turbine Oil Polishing systems can remove free, emulsified, and dissolved water quickly and effectively to improve system performance and reduce your operating and maintenance costs. It aims at turbine oils nature of high water content, easy emulsifiable and high impurity content, and make the oil recover to the new oil's nature. It can also mounted on high pressure pump for flushing requirements Series TY oil purifier is widely used for filtering turbine lubricating oil in electric power, metallurgical, chemical engineering industries. It is good at emulsion breaking, dehydration and removing soap, gelatin, acid, pigment and metal particulates in emulsified turbine oil and low-viscosity lubricating oil as well as turbine oil used in other machinery and electric power equipment. Feature: 1. Breaking emulsification thoroughly with high- molecule polymeric material. 2. Dewatering very effectively with once and for two steps dehydrating method. It can thoroughly clear away the liquid water, free water and 80% dissolved water 3. With distinctive removing impurities technique filtering through double FH trapezoidal network and absorbing by high polymer material, this machine can make the Ã?3 equal or surpass 200 and make the cleanness lower grade 6(NAS1638). 4. With the trapezoidal, spiral, automatic back flushing system. 5.With the advanced dielectric condensation devices. On-line oil purification can be carried out with turbine or water turbine automatically without any person. Technical Parameter item unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 Flow rate L/h 600 1200 1800 3000 6000 9000 12000 Working vacuum degree Mpa 0.06 0.095 Working pressure Mpa 0.3 Running temperature 40 70the temperature of turbomachine below 55 Heating power KW 14 16 18 30 45 55 60 Total power KW 16 18 20 33 48 61 71 Inlet/outlet caliber mm 25 25 25 32 42 50 50

Application & Function: HOPU Series ZYD oil regeneration system is equipped with decolorization system to improve oil color. It is mainly used to remove trace water,gas and other contaminants such as solid particles in the the waste oil, widely used to purify various unqualified electrical insulating liquids such as transformer oil, capacitor oil, switch oil and silicone fluids, etc. After process, oil puncture voltage(breakdown voltage BDV) can be greatly increased, the coefficient of loss tan delta can be significantly improved, and the oil dielectric strength can be maintained. Feature: 1.Higher than the national standard, it can increase oil puncture voltage by at least 35KV at a time, greatly reduce the oil processing period, due to reduced general oil repeatedly heating oil quality aging filtration lead hazards. 2.High vacuum pressure and high flow rate: Absorption speed power=333L/s to meet with the requirements in the installation and maintenance of transformers vacuumize. It is suitable for degas, dewater of transformer oil. 3.Adopt the nano-molecular material filtration and three-dimensional flash distillation technology to remove water, gas and impurities of the transformer oil effectively, to improve the voltage-withstand value and the quality of oil. 4 .Carbon fiber infrared heating system, it can remove all the ethyne from the oil. 5. Adopt VK technology, it can remove the water effectively, such as the dissolve water. 6. Especially applied to vacuum filling oil and drying for power transmission equipments which power is over 110KV. Please contact for more technical details and latest price: Michael Hua is at your service Email 1: mh@hopufiltration.com Email 2: oilfilter@aliyun.com QQ:330713880 Mob: 0086 13896055638 Tel: +86 23 62538144 Fax:+ 86 23 62538144-3 Website: www.hopufiltration.com Branch 1: www.oilpurifiertech.com Branch 2: www.oilfiltration123.com

Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength) Transformer Oil Tester Insulation Oil Tester for Series HJT (test oil breakdown voltage dielectric strength) ? Introduction IIJ series fully automatic oil tester is apply to test the insulating oil's dielectric strength, which is designed as per the requirement of IEC156 Testing Method of Insulation Oil Medium Strength, which via proper programming, has got functions of auto boosting, step down, stirring, display and print out. After breakdown of oil medium, HV break off will operate within 10 seconds to enable an auto isolation of control system partly; this effectively safeguards the personnel security and equipment safety. The automatic oil tester adopt industrial SCM to control, which is applied to integrate circuit, new model I/0 connection, particular testing and anti-jamming technology which largely improve the machines capacity . Main features: 1.Simple operation, automatically (can be finished just press on key) 2.Menu controlled. Input data can clear 3.Can store 99 groups oil testing data which is convenient to reading and print. The testing data can keep 100 years under the condition of power off. 4.System time can go on running under power off; (The system time just for reference can not be the standard of timing) 5.Can upgrade software through RS232 6.High capacity of anti-jamming and high precision of testing. 7.Small volume, light which operated in the open air very conveniently. 8.The set shall be provided with smooth and continuous of output voltage between zero and maximum having no distortion of waveform. 9.Audio sound and visual signal will indicate at the instant of sample failure. ?¡ Technology and parameter data 1.Power Supply: 220 ±10% VAC, 50HZ 2.Output: 60 kV,70KV, 80 kV, 100 kV 3.Capacity: 1.2 kVA (for 60kV), 1.6 kVA (for 80 kV), 2.0 kVA (for 100 kV) 4.Pressure increase rate: About 2 KVA/S 5.Pressure testing speed: 3% 6.Break down sensitivity :

Vacuum Hydraulic Oil Purifier, Oil Purification plant for injection molding machine Hydraulic Oil Filtration Plant hydraulic oil purification systems for injection molding machine 1.effectively break emulsification for high water content hydraulic oil 2.lube oil cleaning system Newly hydraulic and oil filtration systems,emulsion oil purifier Why do we choose oil purifier? After a period of operation, owing to its exposal to oxygen and mixed with water, copper and iron and other foreign materials and high working temperature acceleration , transformer oil will oxidize and lose its original property and cannot be used effectively again. So HUHU oil purifiers can efficiently remove water, dirt, gases and other foreign impurities from oil, such as de-electrical oil, turbine oil, lubricating oil, engine oil, hydraulic oil, compression oil, mechanical oil, quenching oil, heat conducting oil, gear oil etc; so as to maintain its lubricating and insulating property, then to reduce components wear, and cut down oil expenses. APPLICATIONS: 1. The model TYA is widely used in the fields of mechanism, metallurgy, mine, petroleum, chemical etc. 2. The unit can purify various kinds of lubricants as hydraulic oil, machinery oil, coolant oil, refrigerator oil, gear oil, gasoline engine oil, diesel engine oil, heat treating oil, etc. 3. The unit can quickly remove free and dissolved water, gases, impurities and volatile matter like ammonia gases from lubricants, increase used lubricants quality and recover performance to guarantee the correct working performance of hydraulic system, power system, and lubrication system. TECHNICAL FEATURES: 1. With strong impurities filtration ability and large-area, mass and deep precision filtration material can remove the tiny and fine impurities from used lubricants. With PM filter can filter off ferreous impurities. 2. Unique degassing and dewatering system, adopts mature film evaporation and 3D flash distillation technology, and multi-stage oil water separating technology, can quickly remove free and dissolved water and gases. 3. Electrical heating device is the optimized pipeline design, to ensure the unique heating and stable oil temperature. 4. Automatic constant temperature control device, automatic liquid level control device, automatic defoaming device, automatic pressure protection device and excellent configuration can ensure the equipment in high performance. 5. Work online with unattended operation and the indicator lights display the running status. 6. The complete unit adopts the safety interlock device. The discharge oil pump, vacuum pump are interlock to the heating device to avoid adverse effect of misuse. 7. Compact design, low noise, easy operation, longtime free maintenance, low power consumption, running cost saving.

Vacuum Turbine Oil Purifier,Emulsion Oil Purification Plant Vacuum Turbine Oil Purification Plant Series TY vacuum turbine oil purifier mainly be used for purifying unqualified turbine oil, especially for serious emulsion turbine oil, it can quickly and efficiently break emulsification, separate water, gas, particles from oil. So that makes sure quality of treated oil to achieve new oil's standard, ensure whole turbine system work safely. This equipment use a special polymer materials as filter medium combined with vacuum separating technology to break emulsification, dewater, degas, remove acid and particles, make the badly turbid turbine oil becomes clear transparent. Series TY is a perfect turbine oil purifier for live line work; also it can purify low viscosity hydraulic oil and lube oil. Features: 1. Special polymer materials as filter medium with the functions of broken emulsion, dewatering, removing particles 2. Duplex-Stereo film evaporation technology, equips with unique and advanced dewatering, degassing components, can rapidly and effectively separate water, gas from oil. 3. Multi-stage precision filtration system, mesh filtration combined with molecular adsorption technology. 4. Efficient electric heating system, heating uniformity, less power consumption, safe, and reliable. 5. Double-infrared liquid level sensor, pressure protective system to ensure machine operation easy and safely. 6. Adopt interlocked protective system, which connect oil pump, heater and liquid level sensor, avoiding blank heating, blank pumping, oil leak and electricity leak. If there is any fault, machine will be power off automatically. 7. Work online with stream turbine, hydraulic turbine. Turbine Oil Purifier Available Style 1. Fixing type,mobile type with four wheels and mobile type with trailer. 2. Normal appearance type,shelf-covering type and explosion-proof type. 3. Avaliable in different color. Technical Parameters: Index Name Unit TY-10 TY-20 TY-30 TY-50 TY-100 TY-150 TY-200 TY-300 Flow rate L/h 600 1200 1800 3000 6000 9000 12000 18000 Working vacuum MPa -0.06~-0.095 Working pressure MPa 0.4 Temperature range 20 ~80 Power supply 380V 50HZ 3Ph (As per users option)

Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering Oil Filter Element Various Vacuum Oil Purifier Oil Filter Element Parts For Different Stage Filtering Application: This oil filter element is mainly suitable to oil purifier machine for remove the impurity and particles at vacuum state. It can always be used in transformer oil purifier,hydraulic oil purifier,lubricating oil purifier,turbine oil purifier,cooking oil purifier etc.This filter element is mainly composed of fiberglass ,stainless steel,aluminum,It also can be used for oil water separate equipment,air compressor, and the lubrication system of electric power industrial,metallurgical industrial,petroleum chemical industrial,machinery and equipment industrial etc.The 50~100 filter can be rewashing. Product Description: 1. Mass media: general hydraulic oil phosphate ester hydraulic oil emulsion water - glycol 2. Material quality: glass fiber filter paper - BN stainless steel woven mesh - W wood pulp filter paper - P stainless steel sintering network - 3 .Filtration precision: 1 u to 100 u 4. Work pressure: 21 bar to 210 bar 5. Working medium: general hydraulic oil, hydraulic oil, phosphate ester emulsion, water - ethylene glycol 6. Working temperature: - 30 ~ + 110 7. Sealing material: fluorine aprons Nitrile butadiene rubber Technical parameters: Index name Unit 0.5 1 3 5 10 20 50 80 100 Flow rate L/s 10~400L/s Filtration pressure MPa 0.3~0.4MPa Working temperature - 30 ~ + 100 Features Fireproof, Static protection Material Fiberglass Stainless steel Mesh Top caps Aluminum alloy End caps Galvanized Weight Kg 2.2kg Dimension mm 120mmx480mm Our company export all kinds of Oil Purifier Machinewe have a whole set of quality Oil Filtration system. If you have interested in our Oil Treatment Plant such as Oil Purification Machine, Vacuum Dielectric Oil Filtration Plant, Hydraulic Oil Filtration Plant, ect. Please feel free to contact us.

Vacuum Gear Oil Purifier, Compressor Oil Purification Machine PLC Vacuum Lubricant Oil Purifier TYA Series Lubricant Oil Purifier are mainly designed to handle the water infiltration, emulsification and particle pollution of various industrial oil such as gear oil,compressor oil , cooler oil,mechanical oil, hydraulic oil,  caused in the process of their production, transportation and usage. It is solely designed for lubricating oil is made according to nature of high impurity of gear lubricating oil including hydraulic oil and mechanical oil, which has features of short time for treatment and high efficiency, enabling fast removal of oil's water, gas, impurity and volatiles such as alcohol, gasoline and ammonia gas. Hence the quality of oil is improved, viscosity of lubricating oil, flash point and other performances are recovered which ensures a correct running of hydraulic system, power system and lubricating system. Feature: 1) Perfect capacity of removing impurities. The special filters made of special materials which can effectively and rapidly eliminate various impurities, water and gas. 2) Automatic reverses flushing ability, which automatically cleans the mass impurities withheld by the purifier. 3) Advanced medium heating absorption and condensation system 4) Pressure protection, auto heating temperature control, and device of auto separation of condensate water, easy to handle, safe and reliable. 5) Top quality purification material, large capacity of handling impurity, corrosion-proof, high temperature resistant, good mechanical strength, high precision of impurity removal and long lifetime. 6) Unique water/gas removal system, which adopts stereo-evaporation technology, multi-oil water separation technology, enabling fast removal of water, gas and impurity in oil. 7) Imported parts are used for all electric system, which ensures operation of the equipment with high performance 8) Lowly noisy oil pump is specially made