Ultraviolet inks and technologies We manufacture and trade in a wide range of ultraviolet inks and technologies for the optical disc, printed circuit board, label printing and membrane switch industry.
Request an online quotation for Flexographic Printing Ink via our website at: https://www.indevcogroup.com/plastics-converting/flexographic-printing-ink/ Flexography printing ink is mainly used in the packaging industry, producing high-quality impressions with a simple printing process. Best used for printing on corrugated containers, folding cartons, multiwall sacks, paper sacks, plastic bags, milk and beverage packs, disposable cups and containers, labels, adhesive tapes, envelopes, wrappers (candy and food), and others.
Gravure printing, also known as rotogravure printing, is ideally used in long runs and high-quality printing for refined and detailed image using presses and components. Request our Gravure Printing Ink via our website online at Indevcogroup.com Best used for printing on: Food packaging, PE bags, wrapping paper, and others.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
TurbFlex is our Premium Environment friendly water base ink Series for use on Flexographic Presses. TurbFlex ranges of water based flexo inks have stable Ph and viscosity on press is recommended for Paper Cup, Kraft paper application Performance Characteristic - Strong Color & Good Gloss - High Mileage - Good Ink Transfer - Good Printability - Light Fastness Property.
UV Flexo Inks Maxflex is a range of UV flexo inks intended for printing of labels, tags, sleeves and other applications found in narrow web reproducing quality at speed. Performance Characteristic - Max flex inks have optimized flow for press performance - Vibrant color strength at finer anilox with lower ink consumption - Fast curing for higher press speed - High Gloss - Led flexo process colour and base colour
Ultraviolet fluorescent ink is a special printing one giving off visible light (400-800nm) while exposed to ultraviolet light (200-400nm). Ultraviolet light is divided into short wave and long wave according to the excitation wave length. 1kg/can.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Herbs, extracts, oils, herbal tea, indian black tea, cosmetics & beauty products, herbal pesticide, aromatic chemicals use for manufacturing aromatic products, detergents, soaps, cosmetic products, household products, colour pigments, calcium carbonate, herbal extracts, powders, herbs, chemical organic & inorganic and derivatives, fluorescent colour pigments for plastics, ink, papers neon sign, food colours & flavours, herbal pesticides, enzyme.Manufacturer & exporter
The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege:Â 60-65 SHORE Mesh:Â 120/inch Tension: 25 N/cm2 Clean Up:Â Water Strokes:Â 3 Rounds:Â 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%
Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%