PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.
For latest pricing Enquiry., Please contact US with phone number and contact details
Automobile diesel fuel (EN 590) Grade E (winter), recommended for use at ambient temperatures up to minus 15 C (limiting filterability temperature). Diesel fuel EN 590 (EN 590) Grade E is obtained from petroleum refined products and is intended for use as automotive fuel for diesel engines of cars and trucks. Diesel fuel meets the requirements of the international standard EN 590/2000 and is characterized by a low content of sulfur, aromatic hydrocarbons and a high cetane number, which leads to an overall reduction in sulfur oxide emissions, a decrease in the amount of particulate matter in exhaust gases and the formation of deposits in the fuel system of cars and heavy vehicles, reducing exhaust smoke and is the key to good starting properties of the fuel during cold start of the engine. The oil refining industry produces diesel fuel in accordance with GOST 305-82 of three grades: L - summer, used at ambient temperatures above 0 C; 3 - winter, used at temperatures up to -20 C (in this case, winter diesel fuel should have a stagnation
Product Description - Used globally as a refined diesel oil having very low sulphur content. Price of product CIF - All of the various product prices/offers we receive can frequently change, therefore, please be assured we seek to find the best offers possible, and will always pass the most competitive prices/offers available to our buyers. Product origin - Only Non - Sanctioned Fuels Key Specifications/Special Features - Ultra Low Sulphur Diesel 10 ppm & 50 ppm Minimum Order Size and Packaging details - "First initial trial shipment of 15,000 MT, 12 month contract, after 1st successful shipment, 200,000 MT to 300,000 MT per month is possible negotiated directly between buyer and seller. SORRY, NO SPOT CONTRACTS ACCEPTED
Product: Diesel En590 10 Ppm Origin: Kazakhstan price: Available on fixed price and platts minus price. payment: SBLC/DLC CIF: Any Safe World Port./FOB Rotterdam. Destination: looking for buyer all over the world
We sell Oil and Gas Products Wholesale Ultra -low sulphur diesel ( EN590) Liquified natural gas Liquified petroleum gas Ultra -low sulphur diesel ( EN590) Light cycle oil Petroleum coke Eastern Siberia-pacific ocean oil ( espo) Jet fuel A1 Mazut Aviation fuel A-1 & Jp54 Bitumen Base oil Diammonium phosphate Naphtha Ultra Low Sulfur Diesel EN590,DIESEL D2,DIESEL VIRGIN OIL D6
Quantity: Total Quantity of 300,000 MT of Diesel Gas-oil Ultra Low Sulphur (EN590) CIF/FOB Loading Port: Port of Yanbu, Saudi Arabia
EN590 10 ppm diesel available FOB Singapore & Fujairah, Transaction terms are Tank To Tank, Tank To Vessel or Vessel To Vessel, very competitive prices.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
I can supply EN 590, in large quantities, low sulfur diesel oil. From 5,000 MT up to 200,000 MT. Interested Buyer may kindly send their LOI to me to enable me to move forward. The rate is $415 to $430 on CIF basis; any safe port in the world. Do contact me at the earliest.
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
We are pleased to offer Diesel EN590 10 ppm, originating from Kazakhstan. Below are the non-negotiable procedures for TTT(TTV Available) FOB Rotterdam: Product Origin: Kazakhstan Price: -50 Platts If our procedures and pricing meet your approval, please send a Letter of Intent (LOI) and Proof of Funds (POF) to the following email address: info@crudeoilcapitol.com. PROCEDURE FOB TANK TO TANK ROTTERDAM PORT: 1. Buyer issue ICPO containing this procedure, as acceptance of Seller procedure; with bank proof of funds (POF) letter BCL or MT199. ( Prove of funds that we need from end buyer. ( a certified letter from buyer bank officer with seal and signature that discribe the business activity and funds available to cover the deal and indicates that buyer is finically ready and capable to enter to this contract ) . 2. Upon ICPO approval, the Seller sends FCO to be signed by buyer and return to the seller 3. Upon approval of FCO the seller sends the Commercial Invoice (CI) for the first trial delivery value. Buyer signs it and returns to the Seller. 4. The Seller receive the CI signed and approved by the Buyer and sends a preliminary Proof of Product: -Statement of Product Availability from Producer-Refinery. The Buyer will send the Tank Storage Agreement or TSA to the Seller, and after the Seller sends Sales Purchase Agreement (SPA) to Buyer for review and signature of the parties. 5. After as per contract terms agreed, the Seller issues the POP documents, as follows: -Unconditional Dip Test Authorization. -Fresh 48 hours SGS Report in Rotterdam. -Commitment to supply. -Certificate of origin of the product. -Authorization to Sell and Collect (ATSC). -Product Passport. 6. Buyer may order an additional SGS to conduct Dip Test of the product in the Sellerâ??s Tank at buyer expense. 7. Upon successful SGS Report or Dip Test, buyer provides TSR / port clearance, TTTIA signed by Tank Farm and send to the seller, and within 24 hours the Buyer makes 100% payment by MT103 wire transfer for the total product. 8. Upon successful payment of MT 103, the Seller issues injects the product into Buyerâ??s Vessel, submits the full Injection Report and issues Title to the Buyer. 9. The Seller pays a commission all intermediaries involved as per the agreed-upon terms. 10. Subsequently shipment(s) continues as per signed SPA and product payment will be made as per SBLC / MT103 per each product injection delivered, terms agreed.
We supply Diesel Fuel 100 ppm EN 590 on FOB and CIF Incoterms. FOB available from Rotterdam, Houston, and Fujairah. Occasionally we have spot deals. PRODUCT ORIGIN: Kazakhstan Contract directly with the Refinery. Send us an LOI to info@odissiglobal.com The EN 590 standard is the European diesel fuel specification for low sulphur content diesel and describes the properties diesel fuel must meet if it is to be used in automobiles. This specification of diesel is the grade required by a diesel-engine road vehicle (DERV) and the majority of agricultural machinery.
EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.
EN590 low sulphur price is $-NEGOTIABLE discount from Platts NWE ARA I'''ll provide procedure of seller refinery by email. Procedures of refineries are fair and easy and the seller can meet the buyer after the buyer confirms their acceptance of the procedure.
Available products: D2, D6, EN590, DIESEL 10PPM & 50PPM, JET A1/JP54, CRUDE OIL, BITUMEN, MAZUT M100, Copper. Safe procedure and long-term cooperation - that is our motto. As an experienced team based in Berlin, with direct contacts to refineries and direct clients, I and my team ensure a smooth procedure. For us, the customers are the focus of everything we do. To be successful, we need to know what our buyers need. We want to ensure that we offer our buyers added value with our solutions. We meet our commitments and meet our deadlines and goals. Send us LOI so that we can start processing the order. If you have any questions please do not hesitate to contact us! Available products: -JET A1 -JET JP54 -Diesel D2 Automotive, -EN590 10 PPM, -Diesel D6, -Diesel 10PPM & 50 PPM. -Mazut M100 -Bitumen -Crude Oil -Copper
(EN590) 10 PPM/50PPM Origin: Kazakhstan The detailed specification: Meets all International Standards Total Spot quantity order: 100,000MT The price and discount: - FOB ROTTERDAM AND CIF OTHER COUNTRY: DISCOUNT $50 PER MT FROM NWE PLATTS - CIF ASIA: DISCOUNT $70 PER MT FROM SINGAPORE PLATTS Shipment: - TANK TO VESSEL ROTTERDAM PORT or DESTINATION PORT as per conditions in Seller`s FCO Payment terms: As agreed per attached Seller`s SCO / FCO and PROCEDURE, via MT103 Payment Procedure: According to the terms of the contract, to be mutually agreed upon by Buyer & Seller. Inspection: SGS for Quantity and Quality, at embarkation port, DIP TEST
Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)
Diesel EN590-10 PPM Price of product: Platts Fob Singapore Discount -$40 Per Mt. Product origin: Malaysian Origin Key Specifications: Flash Point Min 55 C Minimum order size: 50,000 MT/ Month Packaging details: Loose Bulk And SHIP-TO-SHIP Transfer
