All the parts of the turbine ventilators are finished by the professional machines and the precious molding tools , they are assembled after check by the professional equipments.And the bearings are adjusted and designed by the engineers from ubc company according to our ventilators requirements for low resistance and long usage lubricating oil so as to be sure the long usage and high delicacy
The air vent turbine ventilator operates by utilizing the velocity energy of the wind to induce airflow by centrifugal action. The centrifugal force caused by the spinning vanes creates a region of low-pressure area, which draws air out through the air vent turbine ventilator. Air drawn out by the ATCO air vent turbine ventilator is continuously replaces by fresh air from the outside. The slightest breeze will cause the ATCO air vent turbine ventilator to spin and even after the breeze has stopped, the flywheel effect of the rotor cage will use its stored energy to continuously remove air giving rise to ventilation. Suction is maintained even at low wind velocities.
The raw material of tg turbine ventilations:
Tg turbine ventilations are made of the stainless steel
We use the advanced ubc bearings from the usa
Features:
1.Do not need electric force
2) protection against high temperature, bad air environment
3) anti-corrosion, anti-acids and bases, anti-oxidation
4) long usage.
The ball diameter is 420mm and the throat diameter is 300mm.
The Operating Theory of TG Turbine Ventilation:
â_ The undulating vanes lead to smooth rotation at light wind. The bearings at lower and upper position make smooth turns.
â_ The motility created by the rotation of the vanes brings the hot air, smoke and wet air up to the roof and exhausts them out.
â_ Because the turbine is went on rotating, the fresh air outdoor can enter into the room continually so that the room can ventilate conveniently.
â_ The single rotating mechanism will work normally except there is the severe natural damage during 15 years.
Our Turbine ventilators are possessed with the following traits: no power exhausting, saving energy and money; anti-acid-base, anti- erosion, long-lived used; no noise, no pollution, absolutely environmental protection; improving the air quality, raising working efficiency; conveniently setting up and so on.
They are widely used in chemical industry, light industry, food, medicine, textile and dye, metallurgy, electrical power, construction, tunnel, machine and hotel, cinema and marketplace. Recent years later, our products are of demand exceeding supply, and we have our customers through all parts of the country and some foreign countries.
The characters and the advantages of íºTongguaní¿ no power
ventilation
1. The theory of its running
Our no power ventilations needs not the electric power
instead of easily driving the turbine vanes to ratite
by nature breeze or the temperature difference between
indoor and outdoor so as to make true the running
without cost.
They are the real practical and energy-saving products
without noise and pollution so they can save much
electric power and labors for users in order to lower
the production cost clearly, to improve the working
surrounding of the workshop, to rise the working
efficiency and even to strengthen the quality of their
products.
2. The constitutes of the material
Our no power ventilations are made of the whole
stainless steel which needs no maintenance longer, are
anti-acid and anti-erosion by the only once investment.
The íºTongguaní¿ no power ventilations are set up the
advanced bearings imported from America which can be
assured for about 15 years.
3. The values of the no power ventilations
A. They can exhausted the hot air, waste gas, dust and
other harmful gas; meanwhile, the fresh air outdoor
can come into the workshop so as to better the
working surrounding, to make the workers more
energetic and to increase the benefits of the
company.
B. Lower the usersíª production costs. Because our no
power ventilations belongs to the products which
need no electric power and other consumes for the
life-long time after the only once investment. To a
large extent, they can lower the usersíª products
costing.
C. Enhance the concept of their safety in workshop.
First of all, if there is no much harmful gas in
workshop, the air can ventilate normally so that
they needníªt to worry about the dangerous accidents
caused by bombing or mistakenly using the electric
power.
Secondly, in case there happens the fire in workshop,
our No power ventilators on the roof can make the
smoke indoor flow out more quickly, which at the
same time can bring out more time for the victims to
escape and reduce the loss by the accident.
D. They can demonstrate the strength and the
humanization management of the enterprise, enhance
the "people oriented" principle of the modern
enterprises and make a show of the timeíªs colorful
image.
E. Beautify our living and working surrounding. These
no power ventilators are possessed with an attractive
appearance, so they can play their part in
beautifying the surrounding.
Production Description
The Raw Material of TG Turbine Ventilations:
ó¦) TG Turbine Ventilations are made of the stainless steel.
ó¦) We use the advanced UBC bearings from USA.
The Operating Theory of TG Turbine Ventilation:
â_ The undulating vanes lead to smooth rotation at light wind. The bearings at lower and upper position make smooth turns.
â_ The motility created by the rotation of the vanes brings the hot air, smoke and wet air up to the roof and exhausts them out.
â_ Because the turbine is went on rotating, the fresh air outdoor can enter into the room continually so that the room can ventilate conveniently.
â_ The single rotating mechanism will work normally except there is the severe natural damage during 15 years.
They are widely used in chemical industry, light industry, food, medicine, textile and dye, metallurgy, electrical power, construction, tunnel, machine and hotel, cinema and marketplace. Recent years later, our products are of demand exceeding supply, and we have our customers through all parts of the country and some foreign countries.
Tg-600 are usually used in the general industries and the storerooms.
1. Part one is the ball part and the diameter (body diameter) is 750mm, and part two is middle part and the throat diameter (inner diameter) is 600mm. The third part is base plate.
2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
3. The volume of air discharge is about 1500-5000m3/h.
4. We can design and manufacture other sizes according to your demands.
Tg-880 are specially used in the big industrial workshops, storerooms, and the big buildings where there are much harmful air and the temperature is very high.
1.The ball diameter (body diameter) is 880mm, and the throat diameter (inner diameter) is 680mm.
2..The volume of air discharge is about 2600 to 6500 cbm/h.
3.There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
The air ventilator is a revolutionary conceptual product which exhausts the hot gases from an enclosed area without using any electric power. Yes absolute zero power consumption.
It has no operating cost and gives excellent ventilation performance making the work areas like boiler / furnace / oven sheds, curing and drying areas, casting and molding sheds, workshops, process area utility sheds, dg sheds, compressor houses, power house and packing area, go-downs, etc more cooler and comfortable to work in. The air ventilators are most cost effective substitute to the exhaust fans which continuously gulp the electric power and also have maintenance problems.
High venting efficiency
Unique material
Withstands severe weather
Anti-rust and corrosion
Easy installation fits all roof types
Noiseless
Self lubricating
Attractive design
10-15 years warranty
Highly sensitive
Light weight
Carton or wooden box(different size for different type of products)
The Operating Theory of TG Turbine Ventilation:
â_ The undulating vanes lead to smooth rotation at light wind. The bearings at lower and upper position make smooth turns.
â_ The motility created by the rotation of the vanes brings the hot air, smoke and wet air up to the roof and exhausts them out.
â_ Because the turbine is went on rotating, the fresh air outdoor can enter into the room continually so that the room can ventilate conveniently.
â_ The single rotating mechanism will work normally except there is the severe natural damage during 15 years.
Advantages Conclusions
Our Turbine ventilators are possessed with the following traits: no power exhausting, saving energy and money; anti-acid-base, anti- erosion, long-lived used; no noise, no pollution, absolutely environmental protection; improving the air quality, raising working efficiency; conveniently setting up and so on.
They are widely used in chemical industry, light industry, food, medicine, textile and dye, metallurgy, electrical power, construction, tunnel, machine and hotel, cinema and marketplace. Recent years later, our products are of demand exceeding supply, and we have our customers through all parts of the country and some foreign countries.
The Ventilating Cube of Model TG-500
Form 1
Wind Speed(KM) 3.2 6.4 8
Temperature Difference 5 10 15 5 10 15 5 10 15
Model Turbine Diameter(MM) Throat Diameter
(MM) Room
Height(M)
the ventilating cube per hour(M3)
TG-500 620 500 3 928 1116 1238 1476 1663 1785 1800 1983 2106
6 1080 1317 1494 1627 1864 2041 1951 2188 2365
9 1209 1494 1713 1756 2041 2260 2077 2365 2584
12 1317 1645 1900 1864 2192 2448 2188 2516 2768
Emergency and transport ICU grade electronic ventilator
Features
Vt range: 20-2000ml(VCV);Applicable to adult, pediatric infant(â?¥5Kg)
Ventilation modes: A/C(V),A/C(P),SIMV(V)+PS,SIMV(P)+PS,SPONT,PRVC
8.4 inch LCD screen for easy observation
Touch screen & Navigation knob for simple operation
Simultaneous display of 3 waveforms and 2 loops
Synchronized nebulizer(optional)
Expiratory valve is autoclavable to avoid cross-infection
Active exhalation valve with anti-condensation design
World leading brands of key components of ventilator ensure high accuracy and stable performance
Advanced proportional solenoid technology to realize accurate ventilation control
Multi-safety mechanism and three-priority alarm of visual and audio for different risks
Tg-500b are used in the houses, the ventilating pipes and the small buildings.
1. The ball diameter (body diameter) is 620mm (25inch), and the throat diameter (inner diameter) is 500mm (20inch).
2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
3. The volume of air discharge is about 950-4000 cbm/h.
4. It is about 8 kg/set and the ubc bearings we use are from the usa.
5. We guarantee the usage for 15 years.
6. We can design and manufacture other sizes according to your demands.
The roof ventilation fan applies the theory of convection between natural wind and air to accelerate and transform any parallel airflow into vertical so as to improve the indoor ventilation. The hot air rises and cold air falls, which makes the fan rotate. So the indoor heat, stink and dust are exhausted effectively. It also can effectively remove indoor soot, smoke, odor, moisture, heat, decorative harmful gas, dust, human matabolism and other dirty volatile mixed-doped odor as well as virused and bacteria invasion. As a result, it improves the working environment, protects workers' health and enhances the working efficiency.
It is widely used in warehouse, toilet, factory, workshop, stadium, tennis hall, assembly hall, garage, paper mill, galvanization factory and coating factory.
Advantages:
1) High-efficiency ventilation
2) High-quality stainless steel body
3) Easy and fast installation.
4) Environmental protection, energy saving and no electricity cost.
5) Stable and durable, dehumidification, anti-sweat and rain-proof.
6) High sensitivity and no nosie.
7) All the ventilators adopt American UBC bearings, free lubrication. Supporting brackets are all made of stainless steel, which has very good corrosion-resistant ability.
Specification:
Model No.: AP10"
Material: Aluminium Alloy
Number of Blade: 22PCS
Total Height: 390mm
Turbine Diameter: 390mm
Ventilation Diameter: 250mm
Base plate Dimension: 380mm*380mm.
1.Specifications / structure
1). Material: made of stainless steel by stretching forming, attractive appearance, no rust,
2). Bearing: wholel sealing bearing, which can ensure it operates smoothly and constantly.
3). Special central shaft design, high-class lubricating bearing system: preventing turbine blades
Rotating at high speed from deformation, and extending the service life.
4). Inside support frame: cast iron.
2.Advantages
1). Automatically running. Wind drive. One time investment, no anymore cost.
2). No operating cost, no electricity consumption, environmental protection, energy-saving.
7. Why should you consider a no power roof turbine ventilators?
The ventilator is very quiet and the rotating action provides employees with visual knowledge that the unit is operating.
The roof ventilation fan applies the theory of convection between natural wind and air to accelerate and transform any parallel airflow into vertical so as to improve the indoor ventilation. The hot air rises and cold air falls, which makes the fan rotate. So the indoor heat, stink and dust are exhausted effectively. It also can effectively remove indoor soot, smoke, odor, moisture, heat, decorative harmful gas, dust, human matabolism and other dirty volatile mixed-doped odor as well as virused and bacteria invasion. As a result, it improves the working environment, protects workers' health and enhances the working efficiency.
It is widely used in warehouse, toilet, factory, workshop, stadium, tennis hall, assembly hall, garage, paper mill, galvanization factory and coating factory.
Advantages:
1) High-efficiency ventilation
2) High-quality stainless steel body
3) Easy and fast installation.
4) Environmental protection, energy saving and no electricity cost.
5) Stable and durable, dehumidification, anti-sweat and rain-proof.
6) High sensitivity and no nosie.
7) All the ventilators adopt American UBC bearings, free lubrication. Supporting brackets are all made of stainless steel, which has very good corrosion-resistant ability.
Specification:
Model No.: AP100mm
Material: Stainless steel
Number of Blade: 16PCS
Blade Thickness:1mm
Total Height: 350mm
Turbine Diameter: 20mm
Ventilation Diameter: 100-150mm.
To be packed into cartons.
17292 Turbine Ventilator Suppliers
Short on time? Let Turbine Ventilator sellers contact you.
