The air ventilator is a revolutionary conceptual product which exhausts the hot gases from an enclosed area without using any electric power. Yes absolute zero power consumption. It has no operating cost and gives excellent ventilation performance making the work areas like boiler / furnace / oven sheds, curing and drying areas, casting and molding sheds, workshops, process area utility sheds, dg sheds, compressor houses, power house and packing area, go-downs, etc more cooler and comfortable to work in. The air ventilators are most cost effective substitute to the exhaust fans which continuously gulp the electric power and also have maintenance problems.
The air vent turbine ventilator operates by utilizing the velocity energy of the wind to induce airflow by centrifugal action. The centrifugal force caused by the spinning vanes creates a region of low-pressure area, which draws air out through the air vent turbine ventilator. Air drawn out by the ATCO air vent turbine ventilator is continuously replaces by fresh air from the outside. The slightest breeze will cause the ATCO air vent turbine ventilator to spin and even after the breeze has stopped, the flywheel effect of the rotor cage will use its stored energy to continuously remove air giving rise to ventilation. Suction is maintained even at low wind velocities.
Tg-600 are usually used in the general industries and the storerooms. 1. Part one is the ball part and the diameter (body diameter) is 750mm, and part two is middle part and the throat diameter (inner diameter) is 600mm. The third part is base plate. 2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet. 3. The volume of air discharge is about 1500-5000m3/h. 4. We can design and manufacture other sizes according to your demands.
Tg-500b are used in the houses, the ventilating pipes and the small buildings. 1. The ball diameter (body diameter) is 620mm (25inch), and the throat diameter (inner diameter) is 500mm (20inch). 2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet. 3. The volume of air discharge is about 950-4000 cbm/h. 4. It is about 8 kg/set and the ubc bearings we use are from the usa. 5. We guarantee the usage for 15 years. 6. We can design and manufacture other sizes according to your demands. 650mm*650mm*200mm
The roof ventilation fan applies the theory of convection between natural wind and air to accelerate and transform any parallel airflow into vertical so as to improve the indoor ventilation. The hot air rises and cold air falls, which makes the fan rotate. So the indoor heat, stink and dust are exhausted effectively. It also can effectively remove indoor soot, smoke, odor, moisture, heat, decorative harmful gas, dust, human matabolism and other dirty volatile mixed-doped odor as well as virused and bacteria invasion. As a result, it improves the working environment, protects workers' health and enhances the working efficiency. It is widely used in warehouse, toilet, factory, workshop, stadium, tennis hall, assembly hall, garage, paper mill, galvanization factory and coating factory. Advantages: 1) High-efficiency ventilation 2) High-quality stainless steel body 3) Easy and fast installation. 4) Environmental protection, energy saving and no electricity cost. 5) Stable and durable, dehumidification, anti-sweat and rain-proof. 6) High sensitivity and no nosie. 7) All the ventilators adopt American UBC bearings, free lubrication. Supporting brackets are all made of stainless steel, which has very good corrosion-resistant ability. Specification: Model No.: AP10" Material: Aluminium Alloy Number of Blade: 22PCS Total Height: 390mm Turbine Diameter: 390mm Ventilation Diameter: 250mm Base plate Dimension: 380mm*380mm. Carton.
Model Number: Portable Air Conditioner ((WT-F26 gray) Power Type: DC Use: Room Condition: New After-sales Service Provided: None Warranty:1 year Type: PORTABLE Certification:CB, ce Cooling/Heating:Cooling Only Application:Car, Commercial, Garage, Hotel, Household, Outdoor, RV Power Source:Electric, usb Remote Control: Yes App-Controlled: Yes
Flexible Duct & Accessories
Duct Fabrication
Grill & Diffuser
A/C Units
The air ventilator is a revolutionary conceptual product which exhausts the hot gases from an enclosed area without using any electric power. Yes absolute zero power consumption. It has no operating cost and gives excellent ventilation performance making the work areas like boiler / furnace / oven sheds, curing and drying areas, casting and molding sheds, workshops, process area utility sheds, dg sheds, compressor houses, power house and packing area, go-downs, etc more cooler and comfortable to work in. The air ventilators are most cost effective substitute to the exhaust fans which continuously gulp the electric power and also have maintenance problems
blower inlet casing Material: HT250 Weight:13.65kg Process:sand casting Description: The cast iron pump body which formation of turbulent flow
Hot air oven dryer works with hot air circulation method, adopts electric heating or steam heating. The heating system provides hot air, and the ventilation and dehumidification system circulates the hot air to discharge the moisture in the room according to the process requirements, while supplementing with fresh air. â?? The automatic control system can control the heating, cooling, and dehumidification operations of the drying process according to the set drying process. The hot air dryer is equipped with one and more mobile trolleys and baking trays inside. Heating type:Electric,steam.â?? Classified with trays: 24,48,96,144,192trays. Hot Air Oven Dryer Model:VG-HG24 Size:1600*1200*2350mm Heating type:Electricity Main material:Stainless steel Power:13kw Trays:24pcs Tray size:640*460*45mm Temperature:Adjustable Voltage:380V/50HZ or others Warranty:One year After sales service:Video and online meeting
Ventilator of ICU & Emergency Certificated by CE FDA Supply respirator breathing machine hospital home breathing machine Invasive ventilation & Non-invasive ventilation VCV, APNEA(A/C), V-SIMV, P-SIMV/PSV, MANUAL, CPAP, PA-VC, PCV, PSV, APRV, BIPAP, SIGH
Bow Thruster Schottel Tunnel Thruster Stt 2 Cp.
Turbine air ventilator or roof ventilator.
Tidal Volume 0-2000ml Venlitation Modes A/C-V with Sigh, A/C-P Patient Type Adult, Child, Infant (3.5) Apnea back-up ventilation Manual breath Inspiration flow Max.90 /min Flow trigger 2-30 L/min One Battery run time Minimum 4.5 hours Product Size 168mm* 156mm * 300mm Weight: 8kg HS code 9031809090
**Ready stock in Turkey** -Price: USD11,000/CIF by air *without compressor -Price: USD12,000/CIF by air *with compressor -Operation Features- Inspiration Pressure: 2-100 mBar Inspiration Duration: 0.1-10 Sec. Peep Pressure: 0-50 mBar Breathe Speed: (c) 1-150/mins. (y) 1-100/mins. Flow: (c) 1-60 lt/mins. (y) 2-120 lt/mins. O2 Mixture: 21-100% Spontaneous Pressure Support: 0-100 mBar I/E Rate: 1:10 (x60*)-10:1 (c): Child, (y): Adult
We provide our clients with an unmatched range of turbine ss air ventilator which is widely appreciated by our clients. This product offers durability and high tensile strength. Stainless steel structuring allows adequate protection and resistance. These can be availed at market leading prices. Following are its specifications: • Size: 24” • Weight: 11.200 kg approximately • Speed: depends on wind • Blade: total 42 number 0.5mm thick ss blades • Frame: stainless steel 304 • Top cover: stainless steel 304 • Ring: stainless steel 304 • Mounting: stainless steel 304 21*21*27 inch size, weight.:-6 to 7 kg
Wind Driven Turbine Air Ventilator Roof Fan Exhaust Fan Stainless Steel Wind Turbine Ventilator with Base Plate 610mm /Model NO. 600mm/Material Stainless Steel/Blade Material: Stainless Steel/Type: Axial Fan Mounting :Roof Fan /Certification: ISO, CE, CCC /Ball Dia: 750 /Throat Dia: 600/ Weight: 11.6kgs/Usage: Ventilation/Transport Package : Standard Export Carton/Origin: China
