Trimble 5700 5800 Gps Receiver Battery Suppliers and Manufacturers

Trimble 5700 5800 Li-ion replacement battery High capacity, GPS receiver Model No.: HYLB-526 Standard: 7.4V 2600mAh (For Trimble) Pack style: 2S1P, 18650 Sanyo cell Replacement battery for Trimble 5700, 5800 GPS Reciever/Transmitter. Original Code: 52030, 46607, 38403, 29518. Neutral packing.

Trimble 5800 GPS Base or Rover 450-470 MHz Receiver Trimble 5800 GPS Rover Receiver 450-470 MHz w/ Options... - CMR Inputs - CMR Outputs - RTCM Inputs - RTCM Outputs - Data Collector - Binary Outputs - Data logging - Bluetooth - UHF Transmit - Software Version 2.32 - Boot Version 2.30 - 450 - 470 MHz Radio Module P/N: 59400-66 - Factory Serviced SKU: GPS47 Item ID: X3190-L/T* Condition: Refurbished Warranty: 90 Day Exchange Trimble 5800 GPS Receiver The Trimble 5800 GPS receiver provides reliability and simplicity for basic surveying tasks. You can trust that the proven design of the Trimble 5800 will perform under the toughest conditions. Integrated System Because the Trimble 5800 GPS receiver's components are completely integrated, the system is lightweight and ergonomic and completely cable-free. 2 MB of internal memory makes collecting data for postprocessing extremely easy and efficient, whether for static or kinematic (stop-and-go) surveying. Advanced Technology The Trimble 5800 GPS system offers advanced Trimble GPS technology. It is a 24-channel dual-frequency GPS receiver, containing Trimble's proven Maxwell technology for robust tracking in difficult GPS environments. Two additional channels for WAAS and EGNOS tracking let you perform real-time differential surveys to GIS grade without a base station. The dual-frequency Trimble antenna enhances the tracking capabilities of the Trimble 5800 the patented four-point antenna feed provides submillimeter phase center stability for precise results. The position of the UHF radio antenna mounting further increases accuracy by being out of the GPS line-of-sight, reducing multipath and avoiding interference with the GPS antenna. For rover communications use the built-in 450 or 900 MHz radio, or use an external radio, cell phone or wireless packet data modem. For extended coverage and comprehensive error checking when roving, the Trimble 5800 works with signals from multiple base stations transmitting on the same radio channel. For even larger area coverage, at highest accuracies, the Trimble 5800 works with Trimble VRS networks. Integrated Bluetooth wireless technology enables cable-free communication between the receiver and your Trimble controller. Built For The Field As a rover, the Trimble 5800 is not only lightweight and cable-free; it also consumes minimal power. Two miniature batteries will power the receiver for up to 11 hours at least enough for a full working day. Environmentally rated to IPX7, and submersible to a depth of 1 m, the Trimble 5800 is rugged enough for any job. It can withstand a drop of up to 2 m on to a hard surface. Trimble 5800

Trimble RTK system. Here is what is included: - 1 Trimble 5800 dual frequency L1 and L2 receiver with built in 900 mz radio. (Rover), 5 batteries, dual charger. With case - 1 Trimble 5700 dual frequency L1 and L2 receiver with Zepher Geodetic antenna (Base) 2 handle batteries with charger. With case - 1 SiteNet 900 Radio to be used at base for RTK surveys. - 1 TSC2 Data Collector with Survey Controller (updated) and also comes with TDS survey Pro (updated) for GPS and total station. Extra $1500 when new. With charger. - All cables to connect everything, "Y" cable to connect large marine battery for all day surveys. - 1 Graphite Rover rod for 5800. Includes carry bag. - 1 Aluminum Rover rod to extend radio. All cables. Includes carry bag. - Trimble RTK system. Here is what is included in the auction: - 1 Trimble 5800 dual frequency L1 and L2 receiver with built in 900 mz radio. (Rover), 5 batteries, dual charger. With case - 1 Trimble 5700 dual frequency L1 and L2 receiver with Zepher Geodetic antenna (Base) 2 handle batteries with charger. With case - 1 SiteNet 900 Radio to be used at base for RTK surveys. - 1 TSC2 Data Collector with Survey Controller (updated) and also comes with TDS survey Pro (updated) for GPS and total station. Extra $1500 when new. With charger. - All cables to connect everything, "Y" cable to connect large marine battery for all day surveys. - 1 Graphite Rover rod for 5800. Includes carry bag. - 1 Aluminum Rover rod to extend radio. All cables. Includes carry bag.

Connector: USB 2.0 Type A male U-blox UBX-8030 GNSS Chipset Frequency: GPS: L1, 1575.4200MHz Accepts the signals of up to 71 satellites at the same time Supports NMEA 0183 protocols: GGA, GSA, GSV, RMC, VTG Auto Baud Rate up to 115200 bps Update rate: Single GNSS: 10 Hz (e.g. GPS solo) Sensibility max 167 dBm PIX6 protection class Magnetics, non-slip on the bottom LED-indicator for GPS-status Operating temperature: -35Ë? C ~80Ë? C Power Supply: 5 Volt Current consumption: max 45 mA Cold start in ca. 26 seconds Hot start in ca. 1 second Positioning accuracy: 2.5 m CEP (Circular Error Probable) and 2 m CEP with SBAS Cable Length: ca. 1.5m Dimension (L x W x H): ca. 52 x 52 x 22 mm

SiRF Star III High Performance GPS chipset High sensitivity (Tracking Sensitivity: -159 dBm) Extremely fast TTFF (Time To First Fix) at low signal level Support NMEA 0183 data protocol Built-in SuperCap to reserve system data for rapid satellite acquisition Built-in patch antenna Super-cohesive magnetic for mounting on the car USB interface connection port Waterproof and non-slip on the bottom Delicate Designed Gift Box.

GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.

GPS + GLONASS Receivers (G-Mouse) - UART / TTL Interface GPS + GLONASS Receivers (G-Mouse) - RS232 Interface GPS + GLONASS Receivers (G-Mouse) - USB Interface GPS + BeiDou Receivers (G-Mouse) - UART / TTL Interface

Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.

DS-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset. DS-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the DS-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.

SiRF Star III High Performance GPS chipset High sensitivity (Tracking Sensitivity: -159 dBm) Extremely fast TTFF (Time To First Fix) at low signal level Support NMEA 0183 data protocol Built-in SuperCap to reserve system data for rapid satellite acquisition Built-in patch antenna Super-cohesive magnetic for mounting on the car RS232 interface connection port Waterproof and non-slip on the bottom. Delicate Designed Gift Box.

1.System: Gps Gps+glonass Gps+bds(beidou) 2.Solution: Mediatek Ublox Mstar 3.Dimension: W/o antenna:1009, 1513, 1612, 1613, 2217 Without antenna:2118, 2020, 2925, 3030

• 2x charger • 1x 2m gps pole • 1x dc pole bracket • 1x down load cable from receiver • 1x down load cable for data collector • 1x hard shell transport case • 1x bi-pod • 2x hard shell case

GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm

Ct-GM551 of products utilizes SiRFstarV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Features/Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Features/Hardware and Software - Based on the high performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -

SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -