The on-load tap changer is the only moving part connected with the transformer circuit so more and more attention has been paid to the detection of the on-load tap changer.In the electrical equipment handover and preventive test regulations it is required to check the action sequence of on-load tap changer measure switching time etc.This device is mainly used for measuring the transition waveform transition time transient resistance of transformer on-load tap changer three-phase synchronism etc.
The on-load tap changer is the only moving part connected with the transformer circuit so more and more attention has been paid to the detection of the on-load tap changer.In the electrical equipment handover and preventive test regulations it is required to check the action sequence of on-load tap changer measure switching time etc.This device is mainly used for measuring the transition waveform transition time transient resistance of transformer on-load tap changer three-phase synchronism etc.
product names On - load tap - changer tester transformer on - load tap - changer tester transformer on - load switch tester
The tester can record switch operation waveform in overall process. The longest time is 6.4s.It can test various parameters such as transition waveform, transition time, transition resistance and three phase synchronization one time and analyze results automatically. It has power-off protection, over-voltage protection, perpetual clock and high-speed printing.
Functions:
1. Test transformers of type Y0 Y and display resistance value directly;
2. Automatically analyze waveform fault and mark the fault.
3. Automatically adjust resistance value and time range according to sampling data
4. Transformer type is able to display to synchronization status of three phase;
5. Be able to test with winding or without winding;
6. Four terminal connection mode and provide high accuracy of resistance measurement.
7. Continuous test to save time of power off
8. Make word report
9. 800Ã?480 colorized LCD with touch screen and high speed printer
10. Store 1000 groups of data and also can be saved by USB flash disk
Technical Index:
1. Three phase constant current source charge,charge current: 3A/1A; 0.6A/0.2A
2. Maximum voltage of the port: 24V
3. Maximum range of transition resistance: 100
4. Measuring range: 1A:0.4~20 0.2A:10~100
5. Record time of waveform:300ms
6. Sample rate: 30k
7. Resolution of time:0.1ms
8. Resolution of resistance: 0.1
9. Accuracy of transition resistance: ±5% Reading±0.1
10. Accuracy of transient time: ±0.5% Reading±0.2mS
11. Temperature: -10-40°C Humidity:
3 phase transformer on-load tap changer testeris mainly used to test three-phase transient time, transition waveform, transition resistance, synchronization state, etc. The transformer on-load switch tester is a comprehensive transformer on-load switch measurement and tester, which is used to measure and analyze the electrical performance indicators of power transformers and special transformers on-load tap-changers. The transformer on-load switch tester can automatically capture and display the transition resistance during the transition process. There is also a process of time jumping.
Technical parameters
Three phase constant current source charge,charge current: 3A/1A; 0.6A/0.2A
Maximum voltage of the port: 24V
Maximum range of transition resistance: 100
Measuring range: 1A 0.4 20 0.2A 10 100
Record time of waveform:300ms
Sample rate: 30k
Resolution of time:0.1ms
Resolution of resistance: 0.1
Accuracy of transition resistance: ±5% Reading±0.1
Accuracy of transient time: ±0.5% Reading±0.2mS
Temperature: -10-40 Humidity:
46709 Transformer On Load Tap Changer Suppliers
Short on time? Let Transformer On Load Tap Changer sellers contact you.
The on-load tap changer is the only moving part connected with the transformer circuit so more and more attention has been paid to the detection of the on-load tap changer.In the electrical equipment handover and preventive test regulations it is required to check the action sequence of on-load tap changer measure switching time etc.This device is mainly used for measuring the transition waveform transition time transient resistance of transformer on-load tap changer three-phase synchronism etc.
Transformers,Distribution and Power Transformer,Varivolt
Safety Transformers
Diesel Generators
Industrial Panels
Stabilizers
Energy Saver
Industrial Panels
TEXTILE WASTE WHITE FABRIC CLIPS CUTTINGS NON WOVEN BALES
Composition of clips cuttings approx 60 POLYESTER approx 30 VISCOSE and approx 10 TENCEL LYOCELL
May have foreign bodies approx 1 comes from baling procedure
POST INDUSTRIAL
MATERIALS COME FROM FACTORY THAT PRODUCE BABY WIPES
Can load in 1x40HC container approx 22 MT 10
PLASTIC FILM LAMINATED - MIX QUALITY (PP, PET, PA, PE etc) AND MIX COLOR BALES SCRAP/WASTE.
POST INDUSTRIAL.
Can load in 1x40HC container approx. 26 28 MT (+ 10%).
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PP BAGS - SUPER SACK BALES SCRAP - WASTE.
Post commercial.
Can load in 1x40HC container aprox. 26 MT (10%) net.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PP CUPS, BUCKETS BALES 550 EURO/MT FAS THESSALONIKI PORT GREECE.
Post consumer.
Can load in 1x40' HC container aprox. 26- 28 MT (�± 10%).
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
HDPE BOTTLES, Barrels, Dispencers Bales.
Can load in 1x40 HC approx. 25 MT.
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
UPVC Rigid Window-door Profile Cuttings Mix Colour (White And Brown) Bales.
Post industrial.
Can load in 1x40' HC container approx. 25 MT (10%)
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
LDPE FILM MIX COLOR (JAZZ) BALES SCRAP / WASTE.
post consumer.
Can load in 1x40HC container aprox. 26 MT (10%) net.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PET FILM clear and light blue BALES SCRAP/WASTE.
Post industrial.
Can load in 1x40 HC container approx. 26 - 28 MT.
Ready for shipment. Photos available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
BOPP Film Bales Mix Colors (Printed - Clear - Metalised).
Post industrial. Clean.
Can load in 1x40'HC container aprox. 26-28 MT.
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
PP BAGS BALES SCRAP / WASTE.
Post commercial. Clean.
Can load in 1x40â??HC container approx. 26 â?? 28 MT (�± 10%).
Ready for shipment. Photos are available upon request.
If you are interested kindly contact us for more information (price, available quantity etc.).
You are welcome to visit our company premises and supervise our materials.
Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
46709 Transformer On Load Tap Changer Suppliers
Short on time? Let Transformer On Load Tap Changer sellers contact you.
