Tobee is committed to improvement of slurry pump spares continues with the introduction of the Hyperchrome alloy material. Slurry pump spares have direct connection with slurry, are very crucial to the service life of slurry pumps. The slurry pump spare parts include slurry pump impeller, slurry pump liners, slurry pump throatbush, slurry pump frame plate liner insert, slurry pump casing, slurry pump shaft, slurry pump shaft sleeves, slurry pump bearing assembly etc, They are very easily worn-out components because the slurry pump spares work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of slurry pump spares, the material plays an important role here.
Slurry pump refers to speak refers to through the use of centrifugal force (pump impeller rotation) role of solid, liquid mixed media energy increase of a mechanical, electrical energy into the medium of kinetic energy and potential energy of the equipment. Mainly used in: mining, power plants, dredging, metallurgy, chemical industry, building materials and petroleum and other industry sectors.
Slurry pump conveys a mixture of solid particles containing dross and water. But from the principle of slurry pump belongs to a centrifugal pump, in the iron and steel enterprises are mainly used for converter dust water, blast furnace gas scrubbing water, continuous casting turbid ring water and rolling steel turbid ring water and other systems of slurry transport.
ZGB slurry pump is a cantilevered horizontal double-case centrifugal slurry pump, designed for transporting highly abrasive or corrosive media, widely used in electric power, metallurgy, mining, coal and other industries [1-3]. The pump adopts high chrome alloy flow-through parts, both abrasion resistance and corrosion resistance, supporting a maximum working pressure of 3.6Mpa and multi-stage tandem application [1-2] [4]. Its structure combines combined sealing and mechanical sealing technology, combined with wide and smooth flow channels and thin oil lubrication system to ensure low leakage rate and high reliability [1] [3-4]. Typical applications include ash conveying in power plants, with technical parameters ranging from 23.9 to 94.2 m head and 10.5 to 533.3 m3/hour flow.
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
90412 Tobee Slurry Pump Spares Suppliers
Short on time? Let Tobee Slurry Pump Spares sellers contact you.
Hydroman Hydraulic Slurry Pump is designed for handling rocks, slurry, gravel, sand, stone, minerals, bentonite and others, with the shortest delivery times. Hydroman pumps deliver massive solids production at very low operational costs. The hydraulic slurry pump can install cutters or agitators on various excavators to work like submersible dredging pumps, It can be also used in various hydraulic stations.
Hydraulic Slurry Pump with Agitator for Pumping Sand
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Slurry pump Volute Liner is an important wetted end parts of slurry pumps ,and slurry pump volute basic part number is 110. It forms a slurry pump chamber with slurry pump throat bush and slurry pump frame plate liner insert where the slurry would flow through them. The main purposes of a volute casing is to help balance the hydraulic pressure on the shaft of the slurry pump.
The slurry pump volute has functions as follows:
1) Closed the slurry pump impeller to a certain space, so that inhaled and forced out liquid through the role of the impeller.
2) Most of Pump volute are made to be Volute-shaped, it is also called the slurry pump casing. Because the area of channel section is widening , the high speed liquid around the slurry pump impeller gradually reduce the flow velocity, and part of the kinetic energy is converted to static pressure can effectively
3) The slurry pump volute liner is not only collected liquid that thrown out by the slurry pump impeller, but also an energy conversion device
4) Lead evenly the liquid to the impeller, collect the high-speed flowed liquid from the pump impeller, and send to the next level or export-led.
5) Realize the energy conversion, Reduce the flow speed, transform the kinetic energy to pressure energy .
6) Connect other components, and play a supporting role.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers, from which Weir Minerals selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance and where larger particles or high density slurries are encountered.
Tobee SP/SPR vertical slurry pump is designed for applications requiring greater reliability and durability than conventional vertical process pumps can offer. Fully elastomer lined or hard metal fitted. No submerged bearings or packing. High capacity double suction design. Customized submerged length and suction agitator available. The SP/SPR vertical sump pump ideally suited for heavy continuous handling of abrasive and corrosive liquids and slurries whilst submerged in sumps or pits.
Design Features:
Less wear, less corrosion
Wetted components are available in a wide range of alloys and elastomers, from which Weir Minerals selects the optimum combination of materials for maximum resistance to wear in virtually any industrial application, including those demanding both abrasion and corrosion resistance and where larger particles or high density slurries are encountered.
Tobee M Medium Slurry Pumps are designed for continuous pumping of medium duty abrasive/dense slurries in processes from minerals processing, cyclone feed to regrind, flotation and tailings.
Design Features:
Modular design for ease of maintenance.
Medium duty one piece frame base with lifting points for easy maintenance.
Standard ductile iron outer casings for higher working pressures and incorporating lifting points.
Standard or advanced bearing assembly improves reliability to extend bearing life reduce lubrication costs.
Shaft sealing for increased reliability, stuffing box, expeller, elevated seal or mechanical seal options available.
Standard or advanced impeller design options available.
Allows ease of fitting multiple liner materials, including hard metal, thick section rubber or polyurethane.
Single piece sleeve for stuffing box sealing, lowers stock holding and maintenance.
Multi-purpose design allows for reduced inventory requirements and interchangeability.
Belt guards allows for ease of maintenance and inspection of belt condition.
Tobee L Light Duty Slurry Pumps have been developed for continuous use in slurry applications where low to medium developed head is required, designed for lighter slurry densities up to 1,35. Shares proven unique design features with the AH slurry pump range, A key feature is the light duty high efficiency impeller, engineered with the latest hydraulic and wear technologies for high efficiency and increased wear life. With a range of high quality parts and different material combinations the L Light duty slurry pump has the versatility to ensure the most appropriate pumping solution provided for any given application.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime.
Ductile iron fully lined casing provides durability, strength, safety, and long service life.
Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and low operating costs.
Large, open internal passages designed to reduce internal velocities, maximize wear life and lower operating costs.
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximize wear life.
Designed for rugged duties while offering excellent efficiencies.
Tobee DT Series FGD Gypsum Slurry Pump is a single stage, single suction horizontal centrifugal pump. Mainly used as the circulating pump for absorbent tower in FGD system. It has the advantages of wide range capacity, high efficiency, better energy saving etc,The wetted parts are designed with the CFD fluid simulating analysis technology to ensure its high-efficiency operation. DT series FGD slurry pump is optimal pump type for transporting gypsum slurry, limestone slurry or other abrasive and corrosive medium in thermal power plants.
Design Features:
DT series FGD slurry pump wetted parts adopt the advanced flow simulation technology to guarantee reliable design and high operating efficiency.
Corrosion resistant and wear resistant metal and rubber materials for options.
The special integrated mechanical seal design is suitable to Thermal Power Plant Fuel Gas Desulphurization process.
The bearing at pump end is double-row taper roller bearing, and bearing at drive end is cylindrical roller bearing. The bearings are lubricated with oil to longer the service time.
Achieve highest efficiency all the time by adjusting the bearing components to alter the impeller position in pump chamber.
The pump can be disassembled without dismantling suction or discharge pipes.
Tobee TL(R) FGD Limestone Slurry Pump is the new generation high efficiency energy saving pump product elaborately researched and developed by Tobee through absorbing the technical advantages from similar FGD pumps from domestic and abroad, with reference to the technical specifications of flue gas desulfurization project, aiming at the characteristic of FGD system of transporting medium through pump in thermal power plant.
Design Features:
Excellent performance and comparatively high reliability and stability.
Simple structure, convenient maintenance and reliable operation.
Excellent performance of corrosion resisting and wear resisting, suitable for transporting different PH medium.
The bearing body adopts tubular structure, which will adjust the bearing parts to change the position of impeller in the pump cavity and make the pump be always under high efficiency operating status.
The shaft seals can be classified as filler seal, dynamic seal and assembled mechanical seal specially used for desulphurization technology to facilitate users to select suitable shaft seal according to actual condition. It is easy to be installed and maintained without connecting clean industrial flushing water.
Tobee 6x4D-AH Slurry Pump is a single-stage, single-suction and horizontal heavy duty centrifugal slurry pump with a cantilever design, The 6x4 slury pumps are mainly used in solids containing applications. Depending on process conditions, equipment should be suitable for highly abrasive or corrosive liquids.
Design Features:
Cylindrical structure of bearing assembly: convenient to adjust the space between impeller and front liner and can be removed completely.
Interchangeable anti-abrasive wet parts made of high-chrome alloys.
The discharge branch can be oriented to any eight positions at the interval of 45 degrees.
Various drive types: DC (direct connection), V-belt drive, gear box reducer, hydraulic couplings, VFD, SCR control etc.
The shaft seal uses the packing seal, expeller seal and mechanical seal.
Tobee 14x12ST-AH Slurry Pump is made for high wearing and heavy duty applications. 14x12 slurry pumps and replacement parts are used worldwide industries like mining, mineral processing, power generation, aggregate processing, or any type of slurry pumping system. It is especially for handling the toughest and most abrasive applications.
Design Features:
Power End
Labyrinth bearing isolators to protect internal components during wash-down cycles.
Clearances can be easily adjusted to maintain efficiency while optimizing performance and extending wear life.
Over-sized, self-aligning spherical roller bearings for trouble free operation.
Heavy duty bearing assembly, 50,000 hour minimum L10 bearing life, Distortion free bearing clamp system ensures maximum bearing life and prevents premature fatigue.
Tobe 16x14TU-AH Slurry Pumps provide a ideal replacement for many OEM slurry pumps used in Minerals processing plant, such as Mill Discharge, cyclone feed, transfer slurry tailing, dewatering, pipeline, Power plant, Chemical Process, sand and gravel process, and any other industry application need to transport heavy duty abrasive and corrosion medium.
Design Features:
Heavy duty construction with through-bolt design provides ease of maintenance and minimal downtime
Ductile iron fully lined casing provides durability, strength, safety, and long service life
Large diameter, slow turning, high efficiency slurry pump impellers designed to achieve maximum wear life and low operating costs
Large, open internal passages designed to reduce internal velocities, maximise wear life and lower operating costs
Thick elastomer or alloy bolt-in liners provide superior corrosion resistance plus offer ease of liner change-out and interchangeability to reduce overall maintenance costs and maximise wear life
Minimal shaft/impeller overhang reduces shaft deflection and increases packing life
Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the slurry pump, resulting in reliable operation and prolonged bearing life
