Timber.
Mineral ores, petro product, timber, iron ore, steam coal.Sourcing raw materials for end user
1.High solid content 50% 2.Has high transparency,low fluidity and slump 3.Can be extruded easily in winter(about-15°C) 4.Can stick Metal, Timber, Concrete and other building material 5.VOC free versions are also available, using VOC exempted solvent.
DESCRIPTION CS-106 Winshield is a specially formulated copolymer protective coating used in place of windows frames, glass, bathtub, plywood, plastic faced formwork, moulds prior to casting concrete, to ensure a clean release and protective purpose. FEATURES Do not corrode glass, plastic or equipment Minimize subjects cleaning Cost effective Apply on plywood, timber, steel, glass and plastic faced Non-staining, Non toxic, non hazardous Water-based and environmentally compatible
IT-6600 is an easy-touse water repellent, using silane grafting (or coupling) technique to form water-crosslinked property. It is a non-solvent based resin that penetrates into the substrate heightening its waterproofing ability. Use as a protective coating on porous, water-resorbing surface like ceramics, bricks, tiles, timbers...etc. To prevent powdering, weathering effect on concrete walls Surface waterproofing and leak-prevention apply on internal/ external walls, stones, tile surfaces. Excellent weatherability and waterproofing properties, due to silane grafting (or coupling). High permeability because of the semi water soluble, small diameter of the particles. Ideal to apply on non-organic, porous substrates due to the excellent water-tight property.
DESCRIPTION Is a cement based waterproofing slurry which contains a high quality polymer and selected filler such as silica sand and other additives. When it dry will provide a hard and abrasion resistant waterproofing layer which can be tiled over sucessfully. USES IN APPLICATIONS * Is suitable to make a protection waterproofing layer on * Bathroom, Kitchen & Laundry Area * Balconies & Terraces * Water Tank / Water Reservoir * External Wall FEATURE & BENEFIT It can be used as underlayment to prevent water seepage from the ground before laying marble, granite, natural stone, timber floor, carpet and vinyl. DAMPSCOAT SL is compatible with concrete and any mixture of cement-sand rendering or plastering. After dry, it can be painted over with any water or solvent based paint.
DESCRIPTION Power Screw adhesive is one of ITLS new range of power adhesives developed to give a cost effective and high adhesion performance. It is very low in odor and free of aromatic solvent for use indoor and outdoor. It was designed for use by both the home handy man and professionals. Power Screw adhesive which consists of tough elastomeric rubber, tackifying resins and Light hydrocarbon solvent. Power Screw can be used in most common construction materials. The substrates are timber, plywood, MDF, particle board, hard board, plaster board, cementitious fibrous board, concrete, ceramic, aluminum, ,mild steel, galvanized iron sheet, back of mirror (on wall only). FEATURES *Unique user friendly, highly pseudo-plastic and non runny characteristic making it TRULY easy to use on vertical wall and ceiling. * Extremely easy to extrude from cartridges in winter making it an all round product for use in all seasons. * Gap filling because of its higher solid content and especially it is highly pseudo-plasticity (soft smooth by stiff, non-sagging) property. * Flexible but tough for use around home and in construction * Easy on hand to extrude and apply due to its unique consistency. *Easy to spread our adhesive evenly and thinly due to its soft buttery consistency. * Broad application for most timber based, cementitious substrates, ceramic and most common metallic construction products. * Printable when dried. * Help to spread out pressure on bonded materials thereby prevent localized stress leading to adhesion failure.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
DESCRIPTION Non-Skinning sealant is a one component, non-drying polybutene rubber based mastic. It does not harden but rather remains permanently soft and paste-like. Non-Skinning sealant has excellent resistance to water vapor transmission. FEATURES * Permanently non-skinning * Low shrinkage * Moisture resistance * Excellent adhesion USES * It is suitable for all kinds of plastics, metals, glass, masonry and timber. * It can also be used in installation of cool rooms and prefabricated construction. LIMITATIONS * It should not be applied in exposed joints where dirt pick-up and hand contact. * Not for: Used in areas subject to considerate dynamic stress. * Not for: Mobile homes, truck bodies. COLOR White, almond other colors are available upon request. APPLICATION * Surface must be clean and dry. * Cut nozzle to desired size. * Insert cartridge into caulking gun. * Push sealant ahead for uniform bead. * Clean off excess sealant with kerosene or mineral spirits. CAUTION Use appropriate personal protection to avoid contact with skin and eyes. In case of eye contact, flush with copious amounts of water for at least 15 minutes and get medical attention. In case of skin contact, wash affected areas with hand cleaner followed by soap and water. For further information, please refer to Material Safety Data Sheet (MSDS).