Thread Rolling Dies for Self Tapping Screws, Wood Screws, ChipBoard Screws, Dry Wall Screws, Y-type, A-Type, B-Type,and can manufacture upto 160 mm Thread Length we can also manufacture dies according the customer specification.
Thread rolling dies for self tapping screws, wood screws, chipboard screws, dry wall screws, y-type, a-type, b-type, and can manufacture upto 160 mm thread length we can also manufacture dies according the customer specification.
Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length
Main Color - black, grey, white
Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet
Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.
* Good anti-aging performance effective life up to 20years.
* Easy to apply.
Applications
* Provide waterproof and sealing protection forsteel
structure construction.
* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.
* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.
Phosphate Self-Tapping and anti-corrosion screws are used for drywall fastening. They are used to fix plasterboards to light gauge steel framings of up to 0.7mm in thickness. The length of screw used should allow for a nominal 10mm penetration into metal framing.
Advantages:
Partition System
Lining System
Ceiling System
5845 Thread Rolling Dies For Self Tapping Screw Suppliers
Short on time? Let Thread Rolling Dies For Self Tapping Screw sellers contact you.
Fasteners with a tapered shank (self-tapping screws)
chipboard screw & particle board screw
Similar to a drywall screw except that it has a thinner shank and provides better resistance to pull-out in particle board, while offset against a lower shear strength. The threads on particle board screws are asymmetrical.
concrete screw& Tapcons & masonry screw & confast screw & blue screw & self-tapping screw & Titen
A stainless or carbon steel screw for fastening wood, metal, or other materials into concrete or masonry. Concrete screws are commonly blue in color, with or without corrosion coating. They may either have a Phillips flat head or a slotted hex washer head. Heads sizes range from 0.1875 to 0.375 in (4.763 to 9.525 mm) and lengths from 1.25 to 5 in (32 to 127 mm). Typically an installer uses a hammer drill to make a pilot hole for each concrete screw.
deck screw
Similar to drywall screw except that it has improved corrosion resistance and is generally supplied in a larger gauge. Most deck screws have a type-17 (auger type) thread cutting tip for installation into decking materials. They have bugle heads that allows the screw to depress the wood surface without breaking it.
double ended screw & dowel screw & hanger bolt
Similar to a wood screw but with two pointed ends and no head, used for making hidden joints between two pieces of wood.
A hanger bolt has wood screw threads on one end and machine threads on the other. A hanger bolt is used when it is necessary to fasten a metal part to a wood surface.
drive screw & hammer drive screw
Chiefly used for attaching manufacturers data plates to equipment. Smooth round or mushroom headed with a multi-start thread on the shank, beneath which is reduced diameter shank that acts as a pilot. The screw is fastened by hitting the head with a hammer and is not intended for removal
drywall screw
Specialized screw with a bugle head that is designed to attach drywall to wood or metal studs, however it is a versatile construction fastener with many uses. The diameter of drywall screw threads is larger than the grip diameter.
eye screw & screw eye & vine eye
Screw with a looped head. Larger ones are sometimes called lag eye screws. Designed to be used as attachment point, particularly for something that is hung from it. A vine eye (in the UK at least) is similar to a screw eye, except that it has a proportionally longer shank and smaller looped head. As the term suggests vine eyes are often used for attaching wire lines across the surface of buildings so that climbing plants can attach themselves.
Self-tapping screws have a wide range of tip and thread patterns, and are available with almost any possible screw head design. Common features are the screw thread covering the whole length of the screw from tip to head and a pronounced thread hard enough for the intended substrate, often case-hardened.
our company mainly produces various series of drywall screw, chipboard screw, self-tapping screw, machine screw, all kinds of non-standard goods. Products are exported to Japan, Colombia, France,Brazil Korea,Germany and other Europe and Americ, and praised by the majority of customers!
We are a very experienced company about producing all kinds of thread rolling dies.
All of the rolling dies are produced with digital dimension systematic machines and +/- 0, 005 with sensitivity by cts.Manufacture check is made by using profile projector and hardness measurement apparatus.Cts has been producing high quality rolling dies and has been well-known with its punctual delivery time since 1992.
We are progressing gradually for fastener elements manufacturers.We can produce all the thread profile rolling dies according to our customers' demand.
Briefly, we offer our customers good quality, competitive price and fast service.
We are a very experienced company about producing all kinds of thread rolling dies.
All of the rolling dies are produced with digital dimension systematic machines and +/- 0, 005 with sensitivity by cts.Manufacture check is made by using profile projector and hardness measurement apparatus.Cts has been producing high quality rolling dies and has been well-known with its punctual delivery time since 1992.
We are progressing gradually for fastener elements manufacturers.We can produce all the thread profile rolling dies according to our customers' demand.
Briefly, we offer our customers good quality, competitive price and fast service.
A self-tapping screw is a screw that can tap its own hole as it is driven into the material. Self-tapping screws come with a sharp, piercing tip or a flat, blunt tip. More narrowly, self-tapping is used only to describe a specific type of thread-cutting screw intended to produce a thread in relatively soft material or sheet materials, excluding wood screws. The sharp-tipped screws are designed for drilling their own hole into softer materials such as wood and plastic so they don't need a pilot hole. Other specific types of self-tapping screws include self-drilling screws and thread rolling screws. The advantage of the flat-tipped screw is that it won't get stuck in the material and break off.
