Syringe filter Filter media 3.5 bar 5.2 bar Dimension 16.0mm*23mm 23mm*23.5mm 28.0mm*24.3mm 40.0mm*30.3mm Hold-up volume £¼100 ¦ìl £¼150 ¦ìl £¼250 ¦ìl £¼350 ¦ìl Inlet Female Luer lock Female Luer lock Female Luer lock Male Luer unlock Female Luer lock Female Luer lock Outlet Male Luer unlock Male Luer lock Male Luer lock Male Luer unlock Male Luer unlock Male Luer unlock Flow direction Flow should enter from the inlet Maximum operating temperature 131¡æ Please contact us for more details. 100pcs/bag
Syringe filter material:PTFE/NY/CA/PES/MCE/PVDF/RC/GF parameters:13mm,0.22um/13mm,0.45um/17mm,0.22um/17mm,0.45um/25mm,0.22um/22mm,0.45um/30mm,0.22um/30mm,0.45um Hydrophobic/Hydrophilic
The Syringe Filters are a fast, convenient and reliable filter tool used in the laboratory. It is beautiful and light in appearance and high cleanliness. It is mainly used for sample prefiltration and clarification of removing bacteria and filtration of particles, liquids, and gases. It is the first choice for filtering HPLC and GC small quantities. Hawach produces three series of syringe filters: WINSTAR series syringe filters, FILTSTAR series syringe filters, Sterile series syringe filters.
Syringe-driven filter units are available in 0.22, 0.45 and 0.8 micron pore sizes with pvc housings. Membranes available include mf-millipore (mixed cellulose esters), nylon, durapore (pvdf) or polytetrafluoroethylene (ptfe). The 13 mm units are recommended for filtering volumes from 1 to 10 ml. The 25 mm units are recommended for filtering volumes from 10 to 100 ml. 100/pk
Membrane pore size5/0.22/0.45um Filtration mediapes /pvdf/nylon/ptfe Shell materialpolypropylene Filtration efficiency 99.999% Diameter size13/25/30mm
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22 m and 0.45 m. Three types in filter size:13mm, 25mm and 30mm. Note: Nylon binds protein, do not use when high protein recovery is desired.
1 Syringe Filter has as follows kinds: Hydrophobic PTFE syringe filter,Hydrophilic PTFE syringe filter,Nylon syringe filter,PES syringe filter,Hydrophobic PVDF syringe filter,Glass Fiber syringe filter 2 There are many kinds of material Disposable filter: 1 PP Disposable filter 2 PES Disposable filter 3 Nylon Disposable filter 4 PTFE Disposable filter 5 PVDF Disposable filter.
For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
Overview Quick Details Classification: Other, Other Brand Name: Aijiren Model Number: FE series Place of Origin: Zhejiang, China (Mainland) Material: PTFE Diameter: 13mm,25mm Filter Hole: 0.22um,0.45um,0.8um Color: white Samples: Free MOQ: 1 pack Leading Time: Within 10 workdays after payment Payment: 100% T/T in advance Certificates: ISO9001:2015, BVQI Supply Ability Supply Ability: 100000 Piece/Pieces per Day Packaging & Delivery Packaging Details 100pcs/pack+shrink wrap+export cartons Port Shanghai or Ningbo
Various membranes are available to meet your needs: Polyethersulfone (PES) - low protein binding and faster flow rate. Polytetrafluorethylene (PTFE) - chemical resistance. Nylon (NY) - hydrophilic and lowest extractable. Accurate labeling with specific filter material and pore size for easy identification. Sterilized, manufactured in accordance with ISO standards.
Individually Wrapped PP Housing Easy to connect different sizes tubes or use as a final filter.Very light weight can prevent tubes from bending. . Suitable for single-use systems. Avoid cleaning verification. Large filtration area,good capacity and high flow rates.It is suitable for sterilization and filtration of pure water, chemical intermediates, culture media, buffers, fermentation broths and other biological products. It is suitable for gas exchange filtration in bioreactors, NPWTs, fermenters, etc..They can be either gamma irradiated or autoclavable,which are widely used in single use system and assembling,such like bioreactor,fermenter,cell flasks,carboys,cell culture bags etc.
Features 1.Hydrophilic for ease of use with aqueous solutions 2.High porosity asymmetric pore structure provides high flow and throughput. 3.Cellulose acetate/cellulose nitrate mixture has excellent biocompatibility.
High flow rates(liquids), low protein binding, low concentrations of extractable substances. Low-affinity for proteins and extractable with substantially faster flow rates than PVDF; suitable for pre-filtration and filtration of buffers and culture media. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
CA membranes are use in tissue culture media filtration. ldeally suited for general filtration and biological/clinical analyse requiring maximum protein recovery. High temperature stability can use with heated liquids. Two types in pore size:0.22um and 0.45um. Three types in filter size:13mm, 25mm and 30mm.
High mechanical and tensile strength. Used for most organic solvents and mid-polar liquids. Two types in pore size:0.22m and 0.45m. Three types in filter size:13mm, 25mm and 30mm. Note: Nylon binds protein, do not use when high protein recovery is desired.
25mm syringe filters are ideal for sample preparation of HPLC, GPC, GC, LC-MS, etc. instrumental analyses. These filters can effectively remove fine particulates thus protecting your valuable instruments. Features and Benefits 1. Extremely low extractables, low background 2. Various membrane types meeting different application needs 3. Low hold-up volume 4. Disposable design Quality Filters produced in a controlled environment Manufactured according to ISO9001 certified Quality Management System
For removing particulates reducing signal-to-noise ratios and maintaining flat baselines. Filtering aqueous and organic solutions. Two types in pore size: 0.22um and 0.45um. Three types in filter size: 13mm, 25mm and 30mm.
Various membranes are available to meet your needs: Polyethersulfone (PES) - low protein binding and faster flow rate. Polytetrafluorethylene (PTFE) - chemical resistance. Nylon (NY) - hydrophilic and lowest extractable. Accurate labeling with specific filter material and pore size for easy identification. Sterilized, manufactured in accordance with ISO standards.
Various membranes are available to meet your needs: Polyethersulfone (PES) - low protein binding and faster flow rate. Polytetrafluorethylene (PTFE) - chemical resistance. Nylon (NY) - hydrophilic and lowest extractable. Accurate labeling with specific filter material and pore size for easy identification. Sterilized, manufactured in accordance with ISO standards.
Hawach hydrophobic PTFE syringe filters with test report available with each batch, ISO9001, CE double approved, ultrasonic welding make 100% free leakage
