APPLICATION Stainless steel level sensor switch is well suited for corrosive environment such as water heating or cooling applications, like water dispenser, etc. ã??LONG SERVICE LIFEã?? AC110V-220V and DC 0V-200V circuit can be used, Electrical life:1 million times. PRODUCT SPECIFICATION: Item Name: Water Level Sensor Model No.: CFS-1245S Wire Material: 1332 24# Teflon Working Voltage: AC 110V-220V Working Temperature: -40â??~+100â?? Max Temperature: 100â?? Working Pressure: 1Mpa / 145PSI Max Pressure: 1Mpa / 145PSI Max Switching Current: 0.5A Max Breakdown Voltage: 220VDC Max Carry Current: 1.0A Max Contact Resistance: 100mOhm Max Carry Current: 1.0A
Item Name: Liquid Level Sensor Float Switch Model: CFS-1245S Cable Length: 350mm / 13.78inch Switch Body Size: OD28 x 28mm Thread Dia (Approx): M10*1.5 Max Contact Rating: 10W Float Body Material: SUS 304 Stainless Steel Float Ball Material: SUS 304 Stainless Steel Wire Material: 1332 24# Teflon Working Voltage: AC 110V-220V Working Temperature: -40â??~+100â?? Max Temperature: 100â?? Working Pressure: 1Mpa / 145PSI Max Pressure: 1Mpa / 145PSI Max Switching Current: 0.5A Max Breakdown Voltage: 220VDC Max Carry Current: 1.0A Max Contact Resistance: 100mOhm Features Stainless Steel Liquid Level Sensor are suited for corrosive environment such as water heating or cooling applications, like water dispenser, sumps, pump-control systems, bilge pumps and irrigation systems, etc No standby power consumption, normally open, normally closed, single pole double throw optional
StandardASTMROSHAISIDINENGBJIS LengthCustomized Thickness 005300mm Width Customized Surface 2BBANO3NO4HLNO1Mirror Material 3040Cr18Ni9A182F304SUSF30414301 Hardness 14H12H34HHO Chemical Composition Grade C Si Mn P S Ni Cr Mo Cu N Ti SUS304 008 100 200 0045 0030 80100 1820 Mechanical Properties Grade State Hardness HV Yield Strength Tensile Strength Enlongation SUS304 ANN 200 205 520 40 14H 200250 225 550 35 12H 250310 470 780 6 34H 310370 665 930 3 H 370430 880 1130 Surfce Finish Definition Application 2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster Medical equipmentFood industryConstruction materialKitchen utensils BA Those processed with bright heat treament after cold rolling Kitchen utensilsElectric equipmentBuilding construction NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001 Kitchen utensilsBuilding construction NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Kitchen utensilsBuilding constructionMedical equipment HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size Building construction NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling Chemical tankpipe
Stainless Steel Strip The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance. Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue. Other specifications are also available up to request Hot Rolled Strip Available Size Width: 16.0~609.6 mm Thickness: 2.5~10.0 mm Available Steel Grade: 304, 304L, 316L Surface Finish: No.1 Cold Rolled Strip Available Size Width: 4.0~609.6 mm Thickness: 0.1~3.0 mm Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445 Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Product Stainless Steel coil Surface Finish 2B, BA, NO.1, NO.4, 8K, HL, Embossing, Satin, Mirror, ect Technique Cold Rolled, Hot Rolled Steel Grade 200 series: 201 202 300 series: 301 304 304L 309 310 310s 316 316L 321 400 series: 409 410 410S 420 430 439 443 Duplex:3RE60(Cr18) SAF2304 (Cr23) SAF2205 (Cr22) SAF2507(Cr25) Color Golden, Black, Sapphire Blue, Brown, Rose Gold, Bronze, Silver, ect Processing Type Cutting, bending,stamping,welding,cnc machining Cutting Type Laser cutting;water-jet cutting;flame cutting Application Interior Exterior decoration, Architectur; Evevator; Kitchen, Ceiling, Cabinet, Advertising nameplate, Roof structure, Lead Time 7-15 working days
Electro galvanized wire BWG20 , wire diameter: 0.93-0.95 mm.
Description:Stainless Steel Sheet, Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet Type:201 202 304 316L 310S 309S 321 316Ti 410 420 430 409 duplex,SAF2205,S31803 Thickness:0.3-60mm Width:500-2000mm or customized Length:1000-6000 or customized Standard size:1000-2000mm, 1250-2500mm, 1219-2438mm, 1500-3000mm Surface:2B, No.1, No.4, HL, BA, 8K etc Standard: ASME, ASTM, EN ,BS,GB,DIN, JIS etc Application:Stainless steel sheet applies to construction field, ships building industry, petroleum & chemical industries,war and electricity industries, food processing and medical industry, boiler heat exchanger,machinery and hardware fields.
We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.
Chemical, chemical raw material, auxiliaries, solvents, paint, coating, rubber, plastic, plasticizer, surfactant, additives, steel pipe, steel tube, stainless steel tube, stainless steel pipe, pipe fitting, flange, fasteners, steel wire, steel accessories.Transportation agent,customs clearance service,
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.
- For glass 10mm and 12mm thickness - Material : Available in SS304, SS316, SS316L - Dimensions 49*40*26 ( 165 grams), 62*44*27 ( 280 grams) - Mirror polished or Satin Stainless Steel.
We have range of patch fittings suitable for 8-15mm tempered glass doors. 1. Our patch fittings are suitable for 10mm, 12mm tempered glass doors 2. Bottom Patch fitting. 3. Top patch fitting. 4. Side Over panel. 5. Top center 6. Inserts available for most of the floor springs. 7. Aluminum, SS304. 8. Polished Stainless steel, Satin Stainless steel,aluminium oxsilver ,Aluminum Gold color.
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
- Solid stainless steel in SS304, SS316, SS316L - Satin Chrome, Satin Stainless Steel, Mirror polished - Standoff,Ø32mm x 20mm, Ø38 x 20MM, Ø38 x 30MM, Ø50 x 20MM, Ø50 x 30MM etc. - 10mm, 12mm glass - Screw rod length as per requirement, screw rod with hex insert if required. - Can supply with hole or without hole.
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
LED light.
Pvc doors, doors with mdf molded door skins- with grains, white enamel painted, melamine faced, natural wood veneer, artificial veneer. Steel security doors. Flush doors Solid wooden doors with: oak, red cherry, sapelli, golden teak, merbau, walnut, rosewood, teak etc. Various panel designs. Door with frame. Moulds (casing).
Material: hdf Density:+950kg/m3 Door skin width: 660/740/840/920/1020mm Height: 2150mm Surface: natural wood veneer, melamine, enamel paint or plain door skin. We supply hdf moulded door skins, door panels, many designs to choose, with natural wood veneer, melamine finish, painted, with grains. Thickness 3.0 to 4.5mm, width of panel upto 1020. In natural wood veneer : sapele, mahogany, teak, golden teak, walnut. Wenge, black walnut, rosewood, oak, chinese oak, red white oak. Cherry, makore. Many of these veneers can be supplied with engineered veneered surface
