A series of studs are welded on the surface of the steel pipe by the studded tube automatic welding machine to strengthen the heat exchange components, which is characterized by:
1. The square circumference is welded equally;
2. The hexagonal circumference is welded equally.
Compared with the traditional studded tube manufacturing process, the square and hexagonal studded tubes strengthen the heat exchange elements, which are formed by welding at one time. The phenomenon that the welding stud falls off after the welding is forced to stretch by tooling in the past has been changed, so that the studded tubes are welded more firmly and the welding stud is not easy to fall off. The welding studs, diameter, length, longitudinal spacing, number of circumferential welding stud and angle of inclination of welding stud are all factors affecting heat transfer of studded tubes. Therefore, it must be considered systematically to be more practical. The square and hexagonal circumferential welding and stud shaped tubes are used to arrange the welding and stud shaped tubes equally, which have a larger expansion surface, and the stud shaped tubes have a disturbing effect on the fluid, which can greatly improve the heat transfer coefficient, especially suitable for the enhanced heat transfer of high viscosity oil products, heavy oil and other medium.
Tubes are cylindrical containers or channels used for holding, transferring, or mixing liquids, gases, or solids. Common in laboratories, they include test tubes, centrifuge tubes, and culture tubes, essential for experiments and sample handling.
Hollow Section steel Tube is the general name for the steel pipe other than thecircular steel pipe. Such as square, rectangle, oval,elliptical, cone, trapezoidal, spiral, etc. Different steel pipe can more adapt to the particularity of use conditions, save metal and improve the labor productivity of parts manufacturing. It is widely used in aviation, automobile, shipbuilding, mining machinery, agricultural machinery, construction, light textile and boiler manufacturing. The methods of producing different pipes are cold pulling, electric welding, extrusion and hot rolling, etc. Compared with the round tube, the different tubes generally have a larger moment of inertia and cross section modulus, and have a large bending resistance and torsion resistance, which can greatly reduce the structural weight and save steel.
We deals in the following products of India, China, Taiwan and Korea Origin:-
Galvanized Steel (Galvanized Steel Tapes, Galvanized Steel Wires, Galvanized Steel Strips, Galvanized Steel Coils, Galvanized tubes etc)
66896 Studded Tube Suppliers
Short on time? Let Studded Tube sellers contact you.
Stainless steel tube is a hollow long strip steel made of stainless-steel material. Because of its excellent corrosion resistance, it is mainly widely used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial transportation pipelines and mechanical structural components. In addition, when the bending and torsion strength are the same, the weight is light, so it is also widely used in manufacturing mechanical parts and engineering structures, but also commonly used in the field of furniture decoration.
Stainless steel pipe is divided into seamless pipe and welding pipe according to the production mode, seamless steel pipe can be divided into hot rolling pipe, cold rolling pipe, cold pulling pipe and extrusion pipe, etc., cold pulling and cold rolling is the secondary processing of steel pipe; welding pipe is divided into straight welding pipe and spiral welding pipe.
Stainless steel pipes can be divided into round tubes and different tubes according to the cross-sectional shape. The form tubes have rectangular tubes, rhomboid tubes, ellipse tubes, hexagonal tubes, octagonal tubes and various cross-sectional asymmetric tubes.
It can be divided into Austenitic Stainless Steel Tube Ferritic Stainless Steel Tube Martensitic Stainless Steel Tube and Duplex Stainless Steel Tube by the type of stainless steel.
Innovative technology of pre-materials suitable for gas springs
welded and drawn according to ASTM A213
various ID tolerance requirement of H8, H9, H10 and H11
surface roughness below 15RA (0.40 �¼m)
mechanical properties are controlled to endure excessive stress
hardness, tensile strength, yield strength and elongation
servicing high precision pneumatic cylinder applications
Cast Iron and Ductile Iron tube and fittings PL739
Cast Iron and Ductile Iron tube and fittings can be offered by our comapny to meet different engineering needs.
The difference between ductile iron and gray iron
1. Different chemical composition
Nodular cast iron contains nodular graphite, which can improve its toughness and strength, while reducing brittleness. Gray cast iron contains a lot of carbon, so that its hardness and wear resistance is high, but the toughness is poor.
2. Different organizational structures
The structure of nodular cast iron contains nodular and ferrite, and the distribution of nodular is uniform. While the structure of gray cast iron is mainly ferrite and pearlite, and the distribution of pearlite is uneven.
3. Different performance
Ductile iron has high strength and toughness, and has good corrosion resistance. It is uitable for the manufacture of high load and high pressure parts. The hardness and wear resistance of gray cast iron are high. It is suitable for the manufacture of friction and wear parts.
Application field
Cast iron : because of its low strength and good vibration resistance. It is often used in the production of parts under compressive stress, such as box, base, etc.
Ductile iron : because of its high strength and good toughness. It is often used in the manufacture of parts requiring high strength and toughness, such as crankshaft, connecting rod and so on.
