STP450 Manual Stencil Printer - Small batch production and Research & Development usage! FEATURES Special for SMT stencil and screen printing. Available for precision and fine pitch double side printing. Quick set upnd remove function. X and Y axial angle adjustable. Change different spec board very fast and without tools. Double side printing could be finished and changed very fast and precision SPECIFICATIONS Available frame:24" *24"(600* 600mm) Printing area:20"*20"(500*500mm) Repeatability:0.008mm Weight:50Kg Length of squeegee:220mm Size:840*920*250mm www.renthang.com ; renthang@renthang.com
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
STP-550 Semiautomatic Stencil Printer FEATURES Special design printing machine for lead free and new style component. When the stencil separate with PC board using vertical lift up function. It could keep clean the surface of the PC board. Suitable for fine pitch layout printing. Flexible double Side board fixed base.Adjustable down ward pressure valve. Button switch operation, Automatic control cylinder frame up and down, twin cylinder control metal squeegee. Fix the press and angle. Printing direction from left to right. Single or double side PC board printing are available. SPECIFICATIONS Suitable frame:24"x24"(600 x 600mm) Printing area:20"x22''(500 x560mm) Repeatability: 0.008mm Weight: 60Kg Length of squeegee:220mm Size:840 x 920x250mm
Manual Hand Jet Coding Printer Applying: for PVC Tube Plastic Metal Printing Printing height: 1.2-12.7mm Printing Speed: 0.7 m/s Resolution: Max 600 dpi Printing Angle: All-round Control: screen touch Weight: 790g Charging Voltage: 175-250V, 50-60 Hz
High quality GKG-G5 automatic screen printing machine smt stencil printer Product Description if interest �fell free to let me know�jack@goldlandsmt.com 1. printing accuracy: ± 0.025mm 2. Repeatability accuracy: ± 0.01mm 3. Printing cycle:
Usageï¼?Manual 6 coluor screen printer with aluminum pallet and micro adjustment overprint very precisely. It can print sheet things, ex. paper, T-shirts, bags, clothing, towel, umbrellas, caps, shoes. You have many options of this manual t shirt screen printer: 8 colors 8 stations, 6colors 6 stations, 4colors 4 stations, 4 colors 2/1 station, 3 colors 1 station, one color one station. Specification: HC-SM6-1624 6 color 6 worktable screen printing machine 1) Worktable size: 17.7*25.6 inch (450*650mm) 2) Max print size: 16.5*24.4 inch (420*620mm) 3) Max print speed: 800pcc/H 4) Max print thickness: 0-20 MM 5) Print color number: 6 6) Max height of screen frame: 1.57 inch (40mm) 7) Max size of screen plate: 21.6*26.7 inch (550*680mm) 8) Drying mode: IR 9) Wattage of heater: 3.6KW 10) Positioning system: Mechanical position 11) Power source: Manual, without electricity HC-SM4-1624 4 color 4 station screen printer 1) Max print size: 16.5*24.4 inch (420*620mm) 2) Worktable size: 17.7*25.6 inch (450*650mm) 3) Print color number: 4 Features: 1) 6 color 6 press screen printing machine with high strength, good rigidity tensile support and full steel design to ensure longer life. 2) Center vertical shaft type structure design to rotate smoothly, reduce labor intensity. 3) Infrared dryer make ink dry fast. 4) Worktable can be moved around, and the screen plate can also be moved around, the front of screen plate can be fine adjusted up and down, make it more convenient and precise when overprint, print precision can reach 0.025mm. 5) Screen frame with rotatable arrangement to make operator work alone or cooperate with two or more people, so high efficiency printing come true
Product introduction 1,It is alloy structure design; 2,It is with fix slot and PIN, it is suitable for single and double sides boards; 3,It is with universal thimble and position hole, those make printing position is more accuracy; 4,It is with adjusting device; Specification: PCB size: 400x 300mm Position height: 10mm Application : PCB double sides Adjust range: 0.01mm-0.1mm Dimension : 650x 400x 300mm Weight : 30kg Weight 30kg; dimension 650*400*300mm.
Feature: A) wide compatibility for pcb dimensions from 100mm x 80mm to 850mm x 500mm and pcb thickness from 0.8mm to 6mm. B) high printing resolution 1. High positional accuracy, repeated positioning accuracy â±0.01mm; printing accuracy 0.025mm. 2. Support glue printing. C) automatic control improves production efficiency, quality control and saves production cost: 1. Automatic stencil positioning 2. Automatic pcb alignment 3. Automatic adjustment of squeegee pressure 4. Automatic printing 5. Automatic stencil cleaning (dry-type, wet-type and vacuum-type)
Platform: MTK6225 Frequency::GSM850/900/1800/1900MHZ Display: 2.2 inch QVGA display Camera: 1.3 Mega pixel digital camera Battery: Support NOKIA BL-4C battery, and Chargers Talk Time:4-6 Hours Standby time: 300-450 hours Ringtone: MP3,MIDI,AMR T-Flash Slot:support T-flash card (Option),Maximum support 2GB. Multimedia: Music Player / Video Player / Video Recorder / Camera / Voice Recorder/ E-Book Download:Music/ Video/ Pictures/ Animations / Ring Tones/ Wallpaper/ Screensaver Tools:Torch,Calendar, Memo, Alarm, Games, Calculator, Stopwatch, World Time, Unit Conversion Languages:Arabic French Russian English Vietnamese Thailand Italian Portuguese Turkish Spanish Accessories:1 Battery, 1 Data Cable,1 Earphone,1 User Manual.
Platform : MTK6225 Frequency : GSM850/900/1800/1900MHz Display : 2.2QVGA display Camera : 1.3Mega pixel digital camera Battery : Support NOKIA BL-4C battery,and Chargers Talk Time : 300-450 hours Ringtone : MP3,MIDI.AMR T-Flash Slot : support T-flash card (Option),Maximum support 2GB. Multimedia : Music Player/Video Player/Video Recorder/Camera/Voice Recorder/E-Book Download : Music/Video /Pictures/Animations/Ring Tones/Wallpaper/Screensaver Tools : Torch,Calendar,Memo,Alam,Games,Calculator,Stopwatch,World Time,Unit Conversion Languages : Arabic Freach Russian English Vietnamese Thailand Italian Portuguese Turkish Spanish Accessories : 1 Battery;1Date Cable,1User Manual.
Usage: Ink cup manual pad printer can print IC, cosmetic, pencil, key rings, electronics, stationery, small plastic, toys, glass, metal, ceramic, electronics, IC, etc. Manual one color ink cup pad printer with cheap price is very popular for family workshop, small and medium-sized enterprises, shop, advertisement company print. Specification: HC-PM1-22C Sealed cup manual pad printing machine 1) Max print size: 2.3*2.3inch�60*60mm� 2) Plate size: 3.9*9.8 inch�100*250mm� 3) Closed cup: Ф2.7 inch (70mm) 4) Maximum print speed: 400pcs/H 5) horizontal stroke of rubber: 4.7 inch (120 mm) 6) vertical stroke of rubber: 1.9 inch (50 mm) 7) Net weight: 27kg
Machine summary: The pad printing machinery has many advantages, such as not use power, easy moving, low cost, high-precision, easy operation and so on. It is suitable for cosmetic, text appliances, eletrical component and the printing of trademarks apprearance docoration. Technical parameter: 1. Steel plate size: 100*100mm, 100*150mm 2. Max printing area: 52*52mm 3. Machine dimension: 260*328*485mm 4. Weight: 25kg 5. Printing speed: 400pcs/hr 6. Adjust work table: x. Y. Y rotary 7. Adjust pad: x. Y. Z rotary. Packed by carton.
Application: This pad printer is used for the surface pressing of curved face, flat, and irregular object, particular object with elegant, delicate effect and small area, and roughness where other pressing methods caní»t work. This machine is widely used for glass, metal, board, plastic, and rubber. For example electronic appliances, dolls, toiletries, production date, industrial products, bottle hoods, pens, electronic components, capacitance, ballast resistor, switches and buttons. Feature: 1. Sealed cup is more environmental protection and ink saving. 2. Work table can be adjusted up and down, forward and backward. 3. Convenient ink cup installation, cleaning, and ink loading. 4. No electricity required and easy to move 5. One-handed operation allows the other hand to place objects on the work table at the same time, thus speeding up production and simplifying the work process. 6. Easy to change plate. Parameter Plate area:100x214mm Printing speed: 500 pcs/h Max:printing area:70x150mm Horizental stroke:100mm Vertical stroke:60mm Package: in one carton(400x220x490mm) Weight: 30kg
Tpm-100t manual pad printer Minimum ink & solvent smell Emissions of solvents in to the air reduced by 95% (ozone-friendly) Save up to 70% on thinners Save up to 40% on inks Increase print speed by 50% Achieve consistent viscosity Reduce cleaning up time Keep one component ink in cup for days Save machine set-up time by 90% Save time and energy Ideal for areas of variable temperature conditions Ideal for those working in confined spaces or from home or an office One hand-operation - therefore faster production Sturdy machine / precision engineering All displacements are limited by "stop dogs" Closed cup system - ozone-friendly Simple and precise adjustments of pad holder in xyz coordinates Simple and precise adjustments and of print bed in xyz coordinates Easy clich¿ª clamping system Light and effortless operation Quick set-up time and easy to clean Virtually maintenance-free Totally portable Pressure-stop guides No electricity required / manual operation Tpm-100t specifications : Single colour manual pad printing machine - closed cup Pad printing plate): 100mm (w) x 214mm (l) Rubber pads moveing distance :100mm Ink cup diameter: 70mm maximum print area: 60mm diameter Dimensions: 360mm x 170mm x 435mm Net weight: 22kg name Manual transfer printer with closed ink cup Manual transfer printer with closed ink cup Model no. Tpm-100t Tpm-150t Color 1 1 Plate area 100*214 mm2 100*264mm Closed ink cup íT70 mm íT70 mm Max printing area 100*70mm 150*70mm Conveying jigs ú» / Max moveing distance 100mm 150mm Pad rubber íT50 mm íT50 mm Air pressure ú» / Machine shape 400(l)*220(w)*490(h) 450(l)*220(w)*490(h) Net weight 23kg 27 kg Weight :23kg
Pcb size/max, 400x340mm Pcb thickness, 0.6~6mm Pcb warpage ratio, £¼1%£¨based on diagonal length£© Bottom of board size, 13mm£¨standard configuration£©£¬25mm£¨optional configuration£© Edge of board size, 3mm Transport height, 900¡à40mm Transport direction, left-right; right-left; left-left; right-right Transport speed, 100-1500mm/sec programmable Print head, programmable pressure control air cylinder Squeegee speed , 10~200mm/sec Squeegee pressure, 0~0.5mpa with adjustable pressure reducing meter valve (standard)/ 0-15kg programmable£¨optional closed-loop pressure feedback system£© Squeegee angle, 60¡ã(standard)/55¡ã/45¡ã Squeegee type, steel squeegee (standard), rubber squeegee, other types of squeegee customizable Stencil separation speed, 0.01~10mm/sec programmable Cleaning method, dry-type, wet-type, vacuum-type ( programmable combination of cleaning methods£© Table adjustment range, x: ¡à4mm;y:¡à6mm;¦è:¡à2¡ã Type of image fiducial mark, standard geometry shape of fiducial mark, bonding pad / stencil hole Camera system, single digital camera with upward/downward vision system Air pressure, 4~6kg/cm2 Air consumption, approx 0.07m3 /min Control method, pc control Power supply, ac:220¡à10%, 50/60hz 1¦µ 1.5kw Machine dimensions, 1450mm(l) x 1250mm(w) x 1540(h)mm (excluding the height of indicating lighthouse) Weight, approx:1100kg Operation temperature, -20¡ãc ~ +45¡ãc Operation humidity, 30%~60% Wooden case
200 kW / 250 kVA, SILENT Diesel Generating Set with CPCB II approved acoustic enclosure comprising of : Cummins Model QSB6.7 -G17, Radiator Cooled, Diesel engine developing 307 BHP at 1500 RPM, complete with standard accessories, coupled to Stamford Alternator rated at 200 kW / 250 kVA at 415 Volts, mounted on Channel Iron Base Frame complete with Fuel Tank of 450 Ltrs capacity with MANUAL CONTROL PANEL and 2 number 12 V Batteries.
