* Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
* Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance
+ 0.1mm
* Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
* Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
* Ordinary low alloy steel is a kind of ordinary alloy steel containing a small amount of alloy elements (in most cases, the total amount of w does not exceed 3%). This kind of steel has high strength, good comprehensive properties, corrosion resistance, wear resistance, low temperature resistance, and good cutting and welding properties.
* Under the condition of saving a lot of rare alloy elements (such as nickel and chromium), usually 1 t ordinary low alloy steel can be used for 1.2-1.3 carbon steel, and its service life and scope of use are much longer than carbon steel. Ordinary low alloy steel can be smelted in open hearth furnace and converter with general smelting method, and the cost is close to that of carbon steel.
Material : API5L
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : �±0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
A192
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.
Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material
ST37
Thickness
0.1mm-300mm or as required
Standard
AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique
Hot rolled,cold rolled
Surface Treatment
Clean, blasting and painting according to customer requirement
Thickness tolerance
�±0.1mm
Application
It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time
Within 7-15 workdays after receiving deposit or L/C
Export packing
Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity
250,000 tons/year
Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
158218 Steel Round Bar Suppliers
Short on time? Let Steel Round Bar sellers contact you.
904L tainless steel round bar (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
904L
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
2507 stainless steel is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
2507
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
* Use of 2205 Stainless steel round bar: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
* Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded
articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
310S Stainless steel round bar is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310S Stainless steel round bar has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 â??, and it can work continuously at 1100 â??. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
310S
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
* 201 stainless steel is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.
* A179 is a steel grade produced according to American ASTM standards, which belongs to American standard. A179 Carbon steel round bar is applicable to cold drawn high-quality low-carbon seamless steel pipe for heat exchanger and condenser.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A179
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
Warehouse Storage
* Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project
* A214 is a steel grade produced according to American ASTM standards, which belongs to American standard.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A214
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
Monel400
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
and the project, in order to ensure the quality of the project.
430 stainless steel is used for building decoration, fuel burner parts, household appliances and household appliances. 430F is a steel with free cutting property added to 430 steel, mainly used for automatic lathes, bolts and nuts. 430LX adds Ti or Nb to 430 steel to reduce the content of C, which improves the processability and welding performance. It is mainly used in hot water tanks, hot water supply systems, sanitary appliances, household durable appliances, bicycle flywheels, etc.
Standard
JIS, AISI, ASTM, GB, DIN, EN, BS ETC.
Material
430
Specifications
Round bar
Diameter:0.1~500mm
Hexagonal bar
Size: 2mm~100mm
Flat bar
Thickness
0.3~200mm
Width
1~2500mm
Square bar
Size: 1mm*1mm~800mm*800mm
Length
2m, 5.8m, 6m, or as required.
Surface
Black, peeled, polishing, bright, sand blast, hair line, etc.
Price Term
Ex-work, FOB, CFR, CIF, etc.
Export to
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia,
Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time
Standard size is in stock,prompt delivery or as order's quantity.
Package
Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
12. Widely used in various vehicle parts
13. Wide application and furniture decoration industry
14. Widely used in various mechanical equipment
15. Widely used in various pipelines
16. Widely used in various construction machinery
17. Applied to household appliances
18. Applied to electronic communication equipment
* 304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.
* 316L Stainless steel round bar is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.
* A53 is a steel grade produced according to American ASTM standards, which belongs to American standard. A53 Carbon steel round bar manufacturing requires parts with low stress and high toughness, such as car body, container, deep stamping vessels, pipes, gaskets, etc., which can be used for cold rolling, cold punching, cold heading, cold bending, hot rolling and other processes, as well as carburizing parts with low central strength, carbonitriding parts, etc.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
* Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
* Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A53
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment : Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application : It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing : Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.
* A106 GrB strength grade 415MPa. ASTM A106Gr. B carbon steel round bar is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Carbon steel round bar for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 â?³ - 28 â?³, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.
* Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.
Material : A106Gr. B
Thickness : 0.1mm-300mm or as required
Standard : AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.
Technique : Hot rolled,cold rolled
Surface Treatment
* Clean, blasting and painting according to customer requirement
Thickness tolerance : + 0.1mm
Application :
* It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.
Shipment time : Within 7-15 workdays after receiving deposit or L/C
Export packing
* Waterproof paper, and steel strip packed.
* Standard Export Seaworthy Package.Suit for all kinds of transport,or as required
Capacity : 250,000 tons/year
* Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts
* Hastelloy C-276 alloy is one of the few materials that can be used in hot concentrated sulfuric acid solution It is mainly resistant to wet chlorine, various oxidizing chlorides, chloride solutions, sulfuric acid and oxidizing salts, and has good corrosion resistance at low and medium temperatures. Therefore, in the past 30 years, it has been widely used in harsh corrosive environments, such as chemical industry, petrochemical industry, flue gas desulfurization, pulp and paper making, environmental protection and other industrial fields.
Singapore, Canada, Indonesia, Korea, USA, UK, Thailand, Peru, Saudi Arabia, Viet Nam, Ukraine, Brazil, South Africa, etc.
Delivery Time : Standard size is in stock,prompt delivery or as order's quantity.
Package : Export standard package, bundled or be required.
The inner size of container is below:
20ft GP: 5.9m(length) x 2.13m(width) x 2.18m(high)about 24-26CBM
40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM
40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM
Use of stainless steel round bar:
1. It is used to manufacture self tapping screws such as bolts and nuts;
2. Used for manufacturing rivets;
3. Used for making spring steel wire and transmission mechanism parts;
4. It can be used for filling and strengthening in welding materials;
5. Main parts and components that can be used to manufacture molded articles;
6. It can be made into welded pipe for deep processing of seamless steel pipe or raw material of seamless steel pipe.
7. It is widely used in petroleum, chemical, food and other industries
8. It can also be used in shipbuilding, boiler and pressure vessel manufacturing, etc.
9. Mainly used for automobile parts: axle parts, such as automobile half axle sleeve and various small bearing shells
10. Mainly used for bicycle accessories: bicycle frame tube and various frame joints
11. Widely used in hardware products factories and machinery manufacturers
158218 Steel Round Bar Suppliers
Short on time? Let Steel Round Bar sellers contact you.
