Medical, Industrial & Commercial Usage Anti-Skid Non-Woven SPP 2.5 3.5 gsm options Size: 15*41cm Hand / Machine Made Elasticated opening Colour: Blue Bag = 100 pieces, 10 rolls of 10 pieces Carton = 10 bags (1,000 pieces) * Other sizes, colours and packaging available upon enquiry More information and SOP available on our website catalogue.
Non Woven Free Size Disposable Shoe It Keeps Both Contamination From Shoes And Contaminated Shoes From Spreading The Disease. Put On Your Shoe Covers, Make Sure That All Areas Of The Foot And Shoe Are Covered. Try Not To Touch The Floor Or Other Areas With Your Hands While Putting The Shoes Covers On
Shoe Cover with and without capsule
SHOE COVER
MATERIAL : PP Blue Non-Woven High Melt CATEGORY :PP TYPE :Non-wowen GRADE :Blue SPECIFICATION :PP blue non-wovan, high melt Pure PP, no any contamination 18 tons per load 15 loads ready Origin in USA ORIGIN : US LOADING WEIGHT : 18 Tons CNF (USD/Ton) : $480-680
About Meltblown Nonwove Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven â?¢ Melt blown is a one step process to make fabrics from polymer. â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid. â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: â?¢ Adjustable Pores And Capillary Structure â?¢ Excellent barrier properties â?¢ Filament size 1 -3 �µm â?¢ High Elasticity â?¢ High Filtration capability â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). â?¢ Large Area-to-weight ratio â?¢ Self-bonding â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. â?¢ Very good thermal insulation for apparel application â?¢ Weak tensile properties â?¢ Wicking Properties Application of spun-bond nonwoven fabrics: â?¢ Sanitary and Hygiene: â?¢ Sanitary napkins, â?¢ Baby diapers and â?¢ Incontinence diapers â?¢ Medical and Surgical: â?¢ Gowns, â?¢ Face masks, â?¢ Caps, â?¢ Drapes, etc â?¢ Other Miscellaneous Applications: â?¢ Filtration Material, â?¢ Agriculture, â?¢ Oilsorbents â?¢ Hot-melt adhesives â?¢ Headliners, etc
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
Non-Woven Shoe Cover is made from PP spunbond non-woven fabric. Size: 17 x 38 cm Thickness: 22 GSM Unit: Pairs Price per pair: 0.052/pair(Pound Sterling) Weight per piece: 3.3-3.5 gm per piece We will be able to despatch each FCL material after 15 days of sample approval. Rest depends on cargo/container availability.
1 . a. Products - Non-Woven Shoe Cover (Fabric Code: SPW or VL SY) b . Size & Thickness - Size: 17 x 38 cm Thickness: 22 GSM c . Weight per piece - 3.3-3.5 gm/piece d . Carton Size - Carton Size: 40 x 35 x 51 cm e . Qty in each Carton - 20 plastic bags x 50 Pairs= 1000 Pairs f . FOB : 25/1000 Pieces or 50/1000 Pairs 2. a. Products - Non-Woven Shoe Cover (Fabric Code: SPW or VL SY) b. Size & Thickness - Size: 17 x 38 cm Thickness: 35 GSM c . Weight per piece - 5.0-5.5 gm/piece d . Carton Size : 42 x 34 x 43 cm e .Qty in each Carton - Qty in each Carton f . Prices (USD) - FOB : 35/1000 Pieces or 70/1000 Pairs
Non Woven Face Mask
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
About Meltblown Nonwoven Melt blown is a one step process to make fabrics from polymer. The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided. The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding. The main purpose of melt blown fabric is to provide barrier property for the liquid. Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form. Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric. Characteristics of Meltblown fabrics are: The main desired characteristics expected for melt blown nonwoven fabrics are: Adjustable Pores And Capillary Structure Excellent barrier properties Filament size 1 -3 �?�µm High Elasticity High Filtration capability Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD). Large Area-to-weight ratio Self-bonding The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2. Very good thermal insulation for apparel application Weak tensile properties Wicking Properties Application of spun-bond nonwoven fabrics: Sanitary and Hygiene: Sanitary napkins, Baby diapers and Incontinence diapers Medical and Surgical: Gowns, Face masks, Caps, Drapes, etc Other Miscellaneous Applications: Filtration Material, Agriculture, Oilsorbents Hot-melt adhesives Headliners, etc
Product Tech SMS Medical Nonwoven Fabric Composition 100% PP Weight Range 10gsm-100gsm Workable Width Between 100 and 3,100mm Roll Diameter Between 800 and 1,500 mm Core Dia 76 mm Color Option White Applications Home / Office / Public institution / Toilet / Hotel / Amusement building / Beauty parlor / Beauty Salon / Studio / Restaurant / Factory / Hospital Feature 1. Low-linting 2. Various embossed pattern keeps it from leaving any dirt or fiber lint behind 3. Excellent wet and dry strength 4. Highly absorbent and quick drying 5. Hygienic - Cleans without scattering dust particles 6. Solvent-resistant 7. No binders,chemicals or adhesives 8. Both sides of the non-woven fabric sheet can be used Packaging Shrink PE Film and Cardboard on Both Side. 40HQ can load around 8.5 ton, 20GP can load around 3.5 ton Certifications ISO9001:2000, GMPC, SGS Production Lead 20-40 days after receiving the deposit and confirming the samples Payment Terms 30%T/T Deposit, Balance Against B/L Copy OEM Service Yes
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
Product Description : FDA, CE Price of product ( USD price or FOB price) : "100,000-249,999:$0.18 250,000-499,999: $0.16 500,000+: Contact" Product origin : China Minimum Order Size and Packgaing details : 100,000 units
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1 m, generally 1~3m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
Meltblown Nonwoven Meltblown nonwovens, the fineness fiber up to 1m, generally 1~1m. Meltblown nonwovens has special fiber structure and unique production process, it has a wide range of applications, such as filter materials, medical materials, sanitary suppliers, sound-absorbing materials, oil-absorbing materials, thermal materials, wiping cloth and other fields. Raw Material 100% Polypropylene Color White, Black Width 10-160cm Weight 9-300gsm Grade BFE95/99, PFE99, VFE99, N95/N99, FEP1/2/3, KF80/94/99, etc. MOQ 3,000 KGS per item Leading Time Within 15~30 days upon receipt of deposit and confirmation of samples Payment Terms T/T, L/C, D/P, etc. Characteristics Customized as the application and requirements, some characteristics as follow: 1. High strength, small difference at longitudinal and longitudinal direction; 2. Acid, non-toxic, non-tradiation, harmless to human physiology; 3. With excellent breathability; 4. Master batch dying, never fade; 5. Smooth, bright color, roll slitting, easy use, best quality.
