Product name: sodium hyaluronate Other Name: hyaluronic acid sodium salt; sodium hya INCI Name: SODIUM HYALURONATE Molecular Formula: C14H22NNaO11 Molecular Weight: 403.31 Appearance: White powder Purity: 99% CAS NO.: 9067-32-7 EINECS No.: 618-620-0 Supplier: ZHENYIBIO Sodium hyaluronate, also known as hyaluronic acid sodium,is a physiologically active substance that widely present in the human body. It is a high molecular weight linear mucopolysaccharide formed by polymerization of disaccharide units composed of glucuronic acid and acetyl hexosaminidose. It forms a thick viscoelastic solution in water with physiological pH and ionic strength.It is produced by fermentation of lactic acid cocci.It is a white or off-white particles or powder with no odor.
Product Name: SODIUM HYALURONATE CROSSPOLYMER INCI Name: SODIUM HYALURONATE CROSSPOLYMER Other name: Hyaluronic Acid Elastomer Appearance: Colorless to slight yellow Recommended dosage: 1%-10% Application: Skin care, hair care products, etc. CAS: 105524-32-1 Package: 1KG, 5KG Supplier: ZHENYIBIO SODIUM HYALURONATE CROSSPOLYMER is skin conditioner and also an acidic mucopolysaccharide. It exists in the corneal skin and can absorb 1,000 times its own weight in water.Thus it can retain skin moisture and prevent moisture loss through the epidermis. After using the skin, it will not feel dry and increase luster. It can improve skin nutrition metabolism, make the skin soft, smooth, wrinkle, increase elasticity, and prevent aging. It is a good transdermal absorption enhancer while moisturizing. Used in conjunction with other nutrients, it can play a more ideal effect of promoting nutrient absorption.
Product Name: Sodium Acetylated Hyaluronate INCI Name: SODIUM ACETYLATED HYALURONATE Appearance: White to light yellow powder or granules Recommended dosage: 0.01-0.1% Soluble: Good solubility in water Application: essence, facial mask, cream, lotion, etc. CAS: 287390-12-9 Package: 1KG, 5KG Supplier: ZHENYIBIO Acetylated sodium hyaluronate is obtained by acetylation reaction of sodium hyaluronate. The introduction of acetyl groups makes ACHA have both hydrophilic and lipophilic properties, which can double the biological activity of moisturizing, repairing the keratin barrier, and improving skin elasticity, thereby improving dry and rough skin, and making skin soft and elastic.
Sodium hyaluronate is the salt form of hyaluronic acid. Hyaluronic acid powder is also named hyaluronan powder. It is an anionic, no sulfated glycosaminoglycan, naturally present in the human body. It is found in the highest concentrations in fluids in the eyes and joints. Its molecular weight is from several thousand to several million. Application Sodium Hyaluronate (Hyaluronic Acid) can be added into drinks, health food, etc. Function 1. From inside to outside nourish skin, make it smooth and elastic, remove wrinkles. 2. "Natural" shock absorbers, reduce inflammation, pain, make each joint, parts of the body more resilient, flexible activities freely. 3. To provide a natural barrier to cells, prevent the bacteria and viruses.
Sodium hyaluronate, which has the same high hygroscopicity whether in low humidity or high humidity conditions, automatically regulates and maintains skin moisture, and is known as the Key to the fountain of youth. Therefore, it is widely used in cosmetics as an ideal natural moisturizer to manufacture products suitable for different skin types and used in different climates and environments. High molecular weight sodium hyaluronate can form a breathable thin film on the skin surface to help the skin lock in moisture and block the invasion of foreign bacteria, dust and ultraviolet rays to protect the skin from harm. Low molecular weight sodium hyaluronate can rapidly penetrate into the dermis to slightly expand the capillaries, promote blood circulation, improve metabolism and to promote the nutrient absorption by the skin cells with the functions of removing wrinkles, enhancing skin elasticity and deferring skin aging.
Appearance: white or almost white powder Sodium hyaluronate (dry basis): 90%-105% Glucuronic acid:nlt42.0% Ph(0.1% water solution) :6.0-7.5 Molecular weight:(0.8- 2.0)*106 Protein:nmt0.1% Transparency (0.1% solution): nlt 99% loss on drying: nmt 10.0% Heavy metals (as pb): nmt 20ppm Arsenic nmt 2ppm Bacteria count: nmt 100cfu/g Mold & yeast: nmt 10cfu/g Pseudomonas aeruginosa: negative Staphylococcus aureus: negative. 5kg/drum.
Sodium hyaluronate is the sodium salt of hyaluronic acid. Hyaluronic acid is also named hyaluronan. It is an anionic, nonsulfated glycosaminoglycan, naturally present in the human body. It is found in the highest concentrations in fluids in the eyes and joints.Sodium hyaluronate is odorless white powder, soluble in water, insoluble in organic solvents. Sodium hyaluronate has excellent moisturizing property and anti-inflammatory property. Sodium hyaluronate powder is helpful for promoting skin health, speeding wound healing, relieving joint pain, relieving dry eye and eye discomfort.Sodium hyaluronate powder can be used during certain eye surgeries, it can be used to treat osteoarthritis and various joint disorders, it can be made into eye drops, it can be used in supplement, and it can also be used in cosmetics for skin care.
Could supply various grades of sodium hyaluronate with high quality and favorable price . Details as follows : Sodium hyaluronate Cas no. 9067-32-7 Formula: c28h44n2nao23 Molecular weight: 799.63800 Synonyms: Hyaluronic acid sodium salt Characteristics: white or almost white, very hygroscopic grain or powder, without odor, turn to clear solution when dissolved in water; insoluble in ethanol acetone and aether. It is widely used in pharmaceutical, cosmetic and food industry. Ce certificate, iso9000/14001/13485, gmp workshops
Sodium Hyaluronate, cosmetic grade, 100kDa ~ 500kDa Name: Low molecular weight sodium hyaluronate Chemical name: Hyaluronic Acid, Sodium salt CAS: 9067-32-7 Appearance: White powder or off-white powder Dosage: 0.1% ~ 0.5% Shelf life: 3 years Package: 1kg/bottle Storage: Sodium Hyaluronate is easy to absorb moisture. It should be stored in a dry place and at low temperature(2�C-10�C). Shenzhen BST Science & Technology Co., Ltd export Low Molecular Weight Sodium Hyaluronate, cosmetic grade, 100kDa ~ 500kDa. Functions: Nourishing the skin, long-lasting moisturizing, softens cuticles. Application: Skin care: cream, emulsion, essence, lotion, gel, facial mask, etc. Makeup: lipstick, eye shadow, foundation, etc. Cleansing: facial cleaner, body wash, etc Hair care: shampoo, hair conditioner, styling gel, hair restorer, etc. High molecular weight sodium hyaluronate: water-retaining, forming a permeable mesh hydration film on the skin surface Low molecular weight sodium hyaluronate: nourishing, softening cuticle, nourishing and repairing skin surface Ultra-low molecular sodium hyaluronate: transdermal absorption, water storage, deep moisturizing, free radical elimination, anti-aging Utilizing the moisturizing properties of different molecular weight sodium hyaluronate in different skin layers, obtain the best combination and ratio, make skin moist and soft from inside to outside. Proper use of Sodium Hyaluronate Sodium hyaluronate has good compatibility, and can be added into almost any water-containing cosmetics. Its high molecular and high-viscosity properties make it dissolve relatively slow. The higher the molecular weight and the higher the concentration, the slower it can be dissolved. Dissolving in water. Heating can accelerate the dissolution of Sodium Hyaluronate. Recommended dissolution methods: 1. Heat water to 60�C-80�C, slowly add sodium hyaluronate under rapid stirring to make it completely dispersed and fully swelled. Continue to stir it for 20 minutes to 60 minutes so it can be completely dissolved. 2. Add a proper amount of glycerol into the container with sodium hyaluronate. Shake or stir it to make sodium hyaluronate completely soaked. Slowly add 60�C-80 � C water while stirring, stir until completely dissolved. 3. Add high molecular weight sodium hyaluronate to a solvent such as glycerin, propylene glycol or 1,3-butanediol, stir and mix, then add to the aqueous phase, stir it until completely dissolved.
Sodium Hyaluronate, cosmetic grade, >1500 kDa Name: High Molecular Weight Sodium Hyaluronate Chemical name: Hyaluronic Acid, Sodium salt CAS: 9067-32-7 Appearance: White powder or off-white powder Dosage: 0.1% ~ 0.5% Shelf life: 2 years Package: 1kg/bottle Storage: Sodium Hyaluronate is easy to absorb moisture. It should be stored in a dry place and at low temperature. Usage: Dissolving in water. Heating can accelerate the dissolution of Sodium Hyaluronate. Functions: Lubricating and film-forming, moisturizing, preventing skin damage, thickening and keeping emulsion stab. Application: Skin care: cream, emulsion, essence, lotion, gel, facial mask, etc. Makeup: lipstick, eye shadow, foundation, etc. Cleansing: facial cleaner, body wash, etc Hair care: shampoo, hair conditioner, styling gel, hair restorer, etc. Proper use of Sodium Hyaluronate Sodium hyaluronate has good compatibility, and can be added into almost any water-containing cosmetics. Its high molecular and high-viscosity properties make it dissolve relatively slow. The higher the molecular weight and the higher the concentration, the slower it can be dissolved. Recommended dissolution methods: 1. Heat water to 60 C-80 C, slowly add sodium hyaluronate under rapid stirring to make it completely dispersed and fully swelled. Continue to stir it for 20 minutes to 60 minutes so it can be completely dissolved. 2. Add a proper amount of glycerol into the container with sodium hyaluronate. Shake or stir it to make sodium hyaluronate completely soaked. Slowly add 60�C-80 � C water while stirring, stir until completely dissolved. 3. Add high molecular weight sodium hyaluronate to a solvent such as glycerin, propylene glycol or 1,3-butanediol, stir and mix, then add to the aqueous phase, stir it until completely dissolved. Attention: 1, Sodium hyaluronate should be dissolved in pure water or distilled water, in order to guarantee the fine transparency. 2, Sodium hyaluronate is a high-nutrient substance and easy to be contaminated by microorganisms. Once dissolved, try to use it up at one time. If there is residual liquid, please store it with preservative to avoid microbial pollution. Choose preservatives for normal use. Can not be mixed with cationic surfactants or cationic preservatives to avoid turbidity or precipitation reactions.
Sodium Hyaluronate belongs to mucopolysaccaride,and is linear, un-branched, high molecular weight polysaccharides containing a repeating disaccharide unit.(D-glucuronic and N-acetyl glucosamine).HA weighs about from 100,000 to 1000,000.Its weight lends itself to high viscosity and excellent lubrication within the body.
Taken HA orally can 1. Nourish skin from inner to the outside, make it smooth, elastic and eliminate wrinkle. 2. As a nature â??shock absorbersâ?�, HA can relieve inflammation, pain, make all body site and joints more flexible and elastic. 3. Provide a natural barrier for cells to prevent the intrusion of bacteria and virus. 4. Recommended dosage: 20-200mg/day. 5. Available forms: Tablets, Capsules, Oral Solution Hyaluronic acid is a natural substance, which widely exists in human and animal bodies. With its unique physical and chemical properties, hyaluronic acid has a variety of important physiological functions in our body. Like a molecular sponge, Hyaluronic acid is able to retain water up to 500-1000 times of its own weight. It is one of the most hydrophilic molecules in nature which maintains skin elastic and lubricates the joints.
What is Hyaluronic acid ? Hyaluronic acid(HA) is a straight chain macromolecular mucopolysaccharide composed Of repeat disaccharide units of glucuronic acid and N-acetylglucosamine. It widely consists in the extracellular space of human and animal tissue, vitreum, umbilical cord, skin joints synovia and cockscomb, etc. The commercial HA is commonly a sodium salt, called sodium hyaluronate, habitually called hyaluronic acid. HA is a new biological at home and abroad. Its molecular weight is from several ten thousand to several million. It's aqueous solution has outstanding moisture keeping ability, high viscoelasticity and lubricity. It is widely used in cosmetics, pharmacy and health and beauty food. Applications: Biochemical drugs with high clinical value, which are widely used in all kinds of eye surgery, such as crystal implantation, corneal transplantation and glaucoma surgery, etc.Can also be used to treat arthritis and accelerate wound healing.Used in cosmetics, it can have unique skin protection effect, can keep skin moist and smooth, delicate, soft, elastic, has the anti-wrinkle, anti-wrinkle, beauty care and restore the skin physiology function. 1. Food Grade 2. Cosmetic Grade 3. Eyedrops Grade(Pharm Grade) 4. Injection Grade(Pharm Grade) 5. High molecular weight HA 6. Low molecular weight HA Molecular Weight: High Molecular weight: 1600kDa~1800kDa 2000kDa above Common Molecular weight: 20~70kDa 80~150kDa Low Molecular Weight: 1~10kDa Below 1 kDa Pharmaceutical 1. hyaluronic acid Introduction Sodium Hyaluronate (hyaluronic Acid, HA), the sodium salt of hyaluronic acid ,is a linear high molecular weight mucopolysaccharide compose by thousands of repeating disaccharide units of D-glucuronic acid and N-acetyl-D-glucosamine. 2. hyaluronic acid Advantages Ã? High safety Ecocert certification Non-animal origin bacterial fermentation A series of safety tests carried out by authorized testing organizations Ã? High purity Very low impurities (such as protein, nucleic acid and heavy metal) No pollution of other unknown impurities and pathogenic microorganism in production process assured by strict production management and advanced equipments Ã? Professional Service Customerized products All-around technical support for HA application in cosmetic 3. Functions of hyaluronic acid The molecular weight of Sodium Hyaluronate is 1 kDa~3,000kDa. Sodium Hyaluronate with different molecular weight has different function in cosmitics.
Raw materials/Ingredients of Cosmetics or health-care foods. HA with different molecular weight applied in cosmetics Applications: 1. Facial mask 2. Lotion 3. Cream 4, Essence Functions: 1. Anti-ageing 2. Moisture holding 3. Nourish skin 4. Protect joint bones.
Food grade HA in health-care food As a key ingredient constituting the extracellular matrix in body and the albumen polysaccharide chain for transferring cell information, exits broadly in the tissues and cells of human body. As an important ingredient for dietary supplements, HA has been widely applied in health and beauty food. At present, HA is widely used in cosmetology and health food in America and Japan. Taken HA orally can 1. Nourish skin from inner to outside, make it smooth, elastic and eliminate wrinkle. 2. Relieve inflammation, pain, make all body site and joints more flexible and elastic. 3. Provide a natural barrier for cells to prevent the intrusion of bacteria and virus. 4, Recommended dosage: 20-200mg/day. 5. Available forms: Tablets, capsules, oral solution.
Sodium Hyaluronate belongs to mucopolysaccaride, and is linear, un-branched, high molecular weight polysaccharides containing a repeating disaccharide unit (D-glucuronic and N-acetyl glucosamine). HA weighs about from 100,000 to 1000,000. Its weight lends itself to high viscosity and excellent lubrication within the body. Applications of Sodium Hyaluronate HA can be applied to many cosmetics products, such as cream, emulsion, astringent, serum, facial mask, etc
Sodium Hyaluronate belongs to mucopolysaccaride, and is linear, un-branched, high molecular weight polysaccharides containing a repeating disaccharide unit(D-glucuronic and N-acetyl glucosamine). HA weighs about from 100,000 to 1000,000. Its weight lends itself to high viscosity and excellent lubrication within the body. Functions of Sodium Hyaluronate wound healing; Anti-sunburn and repair the injured skin; Protection against infection; Control of electrolytes and water in extra-cellular fluids; Maintenance of stable transparent fluid in the eye, etc.
Sodium Hyaluronate belongs to mucopolysaccaride, and is linear, un-branched, high molecular weight polysaccharides containing a repeating disaccharide unit(D-glucuronic and N-acetyl glucosamine). HA weighs about from 100,000 to 1000,000. Its weight lends itself to high viscosity and excellent lubrication within the body. Functions of Sodium Hyaluronate wound healing; Anti-sunburn and repair the injured skin; Protection against infection; Control of electrolytes and water in extra-cellular fluids; Maintenance of stable transparent fluid in the eye, etc.
Sodium Hyaluronate belongs to mucopolysaccaride, and is linear, un-branched, high molecular weight polysaccharides containing a repeating disaccharide unit (D-glucuronic and N-acetyl glucosamine). HA weighs about from 100,000 to 1000,000. Its weight lends itself to high viscosity and excellent lubrication within the body. Applications of Sodium Hyaluronate HA can be applied to many cosmetics products, such as cream, emulsion, astringent, serum, facial mask, etc.
Hyaluronic acid is a natural substance, which widely exists in human and animal bodies. With its unique physical and chemical properties, hyaluronic acid has a variety of important physiological functions in our body. Like a molecular sponge, Hyaluronic acid is able to retain water up to 500-1000 times of its own weight. It is one of the most hydrophilic molecules in nature which maintains skin elastic and lubricates the joints. HA applied in Food grade: Improve skin moistureïprotect against premature aging; Improve joint lubrication function; Reduce joint pain; Improve the gastrointestinal function; Wound healing; Improve the function of cardiovascular; Improve immunity; Anti-tumor; HA applied in cosmetic grade: Moistureïcan lock the moisture of 1000times its own weight; Nourish skinï Soften corneous layer; Increase the absorption of nutrients; Sun blockïneutralize free radicals ;Prevent and repair skin injure; Other functionsïlubricate; thicken and stabilize emulsification
