Find Verified Snake Cable Hauler Suppliers, Manufacturers and Wholesalers

Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
The frames
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon
Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Introduction
Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.
The frames
Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user.
Rod selectIon
Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including:
The size of ducting it is to be pushed through
The distance the rod is to be pushed
The number and tightness of bends in the ducting
If the ducting is already occupied by cable
When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals.
Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod may cause increased friction in the tighter bends.

Introduction
Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks.
We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries.
Product introduction
The rod
Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Brand new cable produces by Prysmian Group.

Cables

Perforated cable trays (GI, SS)

Falcon Cables

Falcon Cable

Submersible Flat Cables

FRP cable trays at INDO are manufactured from Glass Armored Thermoset fireretardant
resins Available in different range applied for ideal locations where metallic systems get
easily corroded
INDO FRP Cable Tray system meet stringent Fire Retardant requirements It provides
advantages like Anti Corrosion High Strength No Earthing UV Resistant Good
Electrical Insulator Low thermal conductivity etc

As a leading manufacturer of cable ties we specialize in providing highquality solutions for cable management Our range includes both standard and customized cable ties designed to meet the diverse needs of various applications in homes offices and industrial settings

Key Features
Standard Options We offer a variety of lengths and widths for general cable management needs ensuring theres a perfect fit for your projects

Customized Solutions Tailormade cable ties to suit your specific requirements including length color tensile strength and branding options

Durable Materials Our cable ties are manufactured from highquality nylon and other robust materials providing resistance to wear UV exposure and moisture for longlasting performance

Easy Application Designed for quick and simple use just insert and pull to securely fasten your cables

Versatile Applications Ideal for organizing wires and cables in electronics automotive home improvement and industrial environments

Key Advantages
Expert Manufacturing As a dedicated manufacturer we ensure strict quality control and consistency in every product

Custom Flexibility Our customizable options allow you to create solutions tailored to your specific needs including unique lengths and colors

Strong and Reliable Engineered for excellent tensile strength our cable ties keep your cables securely organized

Wide Range of Uses Perfect for a variety of applications from home organization to industrial cable management

CostEffective Solutions Highquality manufacturing ensures durability reducing the need for frequent replacements and offering great value

Whether you require standard cable ties for everyday use or customized solutions for specialized applications we are here to provide you with the best products Contact us today to learn more about our manufacturing capabilities and how we can help you achieve your cable management goals

Our USB cables are designed to provide reliable charging and data transfer solutions, offering both standard options and customizable solutions to meet your specific needs.

Key Features:

Versatile Compatibility: Suitable for various devices, including smartphones, tablets, laptops, and more.
Standard Options: A range of pre-made USB cables available in different lengths and configurations for quick access.
Customized Solutions: Tailor your USB cable to meet specific requirements, including length, connector types (USB-A, USB-C, Micro USB), and color options.
High-Speed Performance: Supports fast charging and high-speed data transfer to enhance your device usage.
Durable Design: Built with high-quality materials to ensure longevity and resistance to wear and tear.
Quality Assurance: Each cable undergoes strict testing to ensure reliability and safety.
Whether you need a standard USB cable for everyday use or a customized solution for a special project, we are here to help. Contact us today to discuss your requirements and get the perfect USB cable for your needs!

All Types Of LV and MV Power Cables , LSFH, SOLAR, Instrument and Special Cables
COOPER Rod 8 mm and Copper Wire
PVC COMPOUNDS

SFEX CT Manteau, also called the Cable Tray Manteau, is very efficient in extinguishing the initial fire suppression with immediate responses in case of fire because when a micro capsule for fire extinguishing reacts to a certain temperature and flame, it automatically disperses extinguishing agents.
It\'s based on a cooling fire extinguishing method, shows an excellent characteristic of being able to extinguish a fire completely with an immediate response at the time of initial fire if you cover it over the electric power line.


SFEX Solution : SFEX CT Manteau / SFEX AP Tape
1. Horizontal Section Fire : Access Floor, Cable Pit, and Cable Tray
Installation and How It Works
1. Cover the SFEX CT Manteau.


2. Prevent the spread of fire with extinguishing/flame retardance properties


2. Vertical Section Fire
Installation and How It Works
1. Wind the SFEX AP Tape on the cable.


2. Prevent the spread of fire with extinguishing/flame spread prevention properties
Test Result : AP Tape


Test Item
Test Standard
Unit
Test Result


Flame test of vertically placed cables
The carbonization length should not exceed 2.5mm from the bottom edge of the burner
-
Do not exceed (carbonization length: 0.6m)


During installation, photograph after installation
*Test Information

Test Facility Standard : KS C IEC 60332-3-10 : 2003(Compliant)
Volume of nonmetallic material(L) per meter of test specimen : 1.5 (volume of nonmetallic material for finished cable, not including AP Tape)
Number of test pieces : 5
Number of tiers : 1
Number of burners : 1
Position of test piece : Spatial type
Flame application time (minutes) : 20
AP Tape installation method : AP Tape in 0.6/1 kV TFR-CV 4C 35 from the height of burner to the top 10cm gap between AP Tape and 20cm length of AP Tape

Optimized for car performance, from charging to data transfer at once

Easy to use without changing settings or downloading by just connecting the cable, compatible with various USB ports in addition to the vehicle

It is equipped with an EMI filter to prevent fire and over current so that users can have fast and safe charging

9V / 2A (MAX18W) maximum car output

PRODUCT INFO
Snake gourds range from small to very large in size and are elongated, slender, curved, or straight. There are two different categories of Snake gourds. One type is extremely long with hard skin and is grown for ornamental purposes, and the other type ranges in size and is grown for eating and medicinal purposes. Snake gourds that are used for consumption have waxy green skin and are often speckled or striped with a lighter shade of green. The fruit is typically consumed when young, with longer varieties averaging 40-45 centimeters in length and smaller varieties 15-20 centimeters in length. The gourd may grow straight or in twisted curls and spirals. When Snake gourds are young, the seeds are fairly non-existent, the pulp around the seed mass is firm, and the flavor is mild and similar to a cucumber. As it matures, the rind becomes hard, turns red, and the flavor becomes bitter and gelatinous with many seeds. Snake gourds contain iron, magnesium, potassium, manganese, vitamins A, B, and C, fiber, calcium, and phosphorus.

USES
Snake gourds are best suited for cooked applications such as stir-frying, baking, stuffing, and boiling. They can be prepared and used like zucchini, sauteed and served as a side dish or added to dishes with other sauteed vegetables. They can also be added to sabzi, chopped into curries, stuffed and grilled, made into a chutney, fried, blended into soups, sliced into stir-fries, or pickled for extended use. When the gourd is mature, the seed mass within is scraped out and used like tomato paste in various Indian dishes. Snake gourds pair well with turmeric, cumin, coriander, mustard, red chiles, curry leaves, coconut, onion, garlic, potatoes, tomatoes, pumpkin, lentils, tofu, poultry, pork, and beef. They will keep for 2-3 weeks when stored in an airtight container in the refrigerator.

SEASONS
Snake gourds are available in the late summer through fall.