We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Copper slag is a by-product of copper extraction by smelting. During smelting, impurities become slag which floats on the molten metal. Copper slag is mainly used for surface blast-cleaning. Abrasive blasting is used to clean and shape the surface of metal, stone, concrete and other materials. In this process, a stream of abrasive grains called grit are propelled toward the workpiece. Copper slag is just one of many different materials that may be used as abrasive grit. Rate of grit consumption, amount of dust generated, and surface finish quality are some of the variables affected by the choice of grit material. Internationally the described media is manufactured in compliance with ISO 11126-3[4] The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards. SIZES AVAILABLE 0.50 MM TO 1.50 MM 0.50 MM TO 2.50 MM 0.50 MM TO 3.00 MM 0.50 MM TO 4.00 MM 0.10 MM TO 5.00 MM
Lead slag produced from rotary furnace lead percentage is 20 to 25%
We manufacturer, suppler of copper slag and garnet abrasive sand
Copper Slag for Sandblasting/surface cleaning in all sizes.
Copper Slag
Copper slag is a by-product produced during the smelting of copper, which is then processed into abrasive products. Typically it is composed of Ferro silicate material and oxides formed when the molten slag is quenched in cold water. This cooling process fractures the slag into coarse, angular particles making it an ideal choice in many applications. It is a low-cost expendable abrasive suited for open blast cleaning and due to its low silica content, it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. Applications of Copper Slag include abrasive blasting, building materials, landfilling, road construction, abrasive tools, cutting tools, tiles, glass, and roofing granules.
Synthetic Slag is neither a by-product nor a blended material, but a calcium aluminates with controlled composition. Pre-melting ensures a homogenous consistent chemical composition, as well as the most efficient mineralogical phases. In secondary metallurgy, Synthetic Slag is preferably added during the tapping operation of the steel into the ladle. The flux will quickly form a reactive and fluid slag with the other materials.
Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes
SMS steel slag available 200000 MTS available in India.The following chemical analysis are as follows : Cr203%=5.06 FeO%=1.87 MnO%=4.15 SiO2%=29.35 CaO%=34.1 A1203%=11.52 MgO%=11.13.
Krishna Enterprises are produces as the crystallization have higher purity and hardness of copper slag. We are leading manufacturer of copper slag and supply our entire nation. We. Having Processing Plant in South india and North India Regions Near to Indian Ocean Ports. We are producing material based on research and sales on products in global market. These are according to the client demand. We are dealing in copper slag that is made by superior quality with required customized size. Why choose our Copper Slag? Our copper slag is environmentally friendly abrasive Our copper slag is low dusting material. Our copper slag is nontoxic abrasive. Our available Copper Slag size is: 0-3 mm as per Customers Required Our Copper Slag color: Black Quality: Our copper slag is high purity, durable, and super-fine granular. Our available packing size:25/40kg,1MT jumbo Bags or as per client's demand. Application: Copper slag mostly used in sand blasting gun Copper slag is used in the bronze welding (brass welding) of copper, cast iron, and malleableiron and for the fusion welding of materials of the same or closely similar composition Intended for use in bronze welding (brass welding), cast iron or malleable iron Old steel outdoor surface cleaning, rust removal, strengthening the like. As a wear-resistant Floor aggregate, it can be made of hard floor tiles for squares, garages and other non-slip floor. Used in counter weight sand, such as cement plants. After fine processing, it can apply to denim coating and spraying a variety of more sophisticated use. Copper slags is used for the copper and copper alloy filler rods Additional Information: Delivery Time: Depend on quantity Packaging Details: As per customer client's demand
we have a good quality lead slag containing 30%Pb contain 10 to 15 % metal. Quantity 2000 ton per month.
The Ground Granulated Blast Furnace Slag (GGBS/GGBFS) is a type of eco-friendly green building material and high quality secondary cementitious material for concrete and cement. It is recognized as one of the best secondary cementations material for building high durable concrete stricture in the world today! GGBS has taken over a top place of high-performance cement and concrete mineral additives with its unique characteristics of hydration, low-price raw material. GGBS is obtained by quenching molten iron blast furnace slag (a by-product of iron and steel making) in water or steam. It is then further grounded into the desired fineness in terms of the required particle size distribution. The main components of blast furnace slag are CaO (30-50%), SiO2 (28-38%), Al2O3 (8-24%), and MgO (1-18%). The other important aspect of GGBS is its superiority in concrete durability which extends the lifespan of buildings from fifty years to a hundred years. APPLICATIONS Soil stabilization Mortar Used in combination with Portland cement Pre-cast concrete Ready mix concrete Specialist projects
Features Of Granulated Blast Furnace Slag (GBFS) Granulated Blast Furnace Slag or GBFS is formed when Blast Furnace Slag or BFS is successively at a fast rate quenched from the furnace rather than left for cooling. It has a density of about 60% to 70% that of natural sand. This material has a much increased resistance to sulfate attack. This eventually leads to better performance in countering acids of any type. In GBFS, no type of reaction related to alkali and silica occurs. Also the material provides a huge saving in connection to carbon dioxide emission which is an extra boon. What constitutes GBFS are its properties that consist of durability, appearance, higher ultimate strength than concrete which is made up of Portland cement and high sustainability level of the product made out of this material.
Blast furnace slag is a nonmetallic coproduct produced in the process. It consists primarily of silicates, aluminosilicates, and calcium-alumina-silicates. The molten slag, which absorbs much of the sulfur from the charge, comprises about 20 percent by mass of iron production. The average chemical composition of the material is the following: CaO 36.50% MgO 7.90% Al2O3 11.70% MnO 1.13 % K2O 0.43 % Na2O 0.22% FeO 1.71 % SiO2 38.73% TiO2 0.69% S 0.86% We have available two different lots of slag GRANULATED BLAST FURNACE SLAG The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag. Origin :- Vietnam . India Payment Terms :- LC/SBLC
Aluminum remelting slag powder with 50% Al, 10% Fe and 3% Ni.
Product Description - Synthetic slag is an artificially produced slag consists of oxides of Calcium , Magnesium and Alumina in different proportions for conditioning secondary steel processing slag .The key factor for producing good quality of steel is processing and effective separation of slag . The specification of Synthetic Slag varies plant to plant due to the difference in manufacturing factors ,hence making Synthetic slag is a tailor made product suitable to individual specification and use .However We manufacture different slag based on Customer's specifications & Requirements Product Specification CaO(%) 25.50 MgO (%) 03-06 Al2O3(%) 30-55 SiO2(%) 01-04 Fe2O3(%) 01- 04 CaO:SiO2 (%) 01:14 Melting Temp (DegCen) :1350-1450 LOI(%) : 0.1 -0.4 Bulk Density g/cc : 2.5- 2.8 Specific Consumption/ Mt 6.7 Kg Size As per Requirement Application Areas Steel Plant Product Features Protect the refractory lining from slag corrosion Attain fluid state at 1350-1400 Degree Centigrade Basic in nature Packing - 25KG HDPE bag / In 1 Mt Jumbo Bags Weighing Container details - 20 crate accommodate 20 Mt Pricing - 0.33 US$ / Kg FOB Mundra port- Gujrat India / FOB Navasheva- Mumbai, India Minimum quantity - 20MT Origin - India
Granulated Blast Furnace Slag : Granulated blast furnace slag or gbfs is the residue of combustion in the furnace of the steel refining process. It is obtained by quenching molten iron slag from a blast furnace in water or steam, to produce a glassy, granular product that is then dried and ground into a fine powder. Ggbfs or ground granulated blast furnace slag is formed when gbfs is further processed or ground using conventional cement clinker grinding technology. Uses and benefits of GBFS/GGBFS uses : - GGBFS or GBFS is the most used raw material in cement industry to make slag cement. - Lightweight fill - Raw material for the manufacture of glass - GBFS can be used as a substitute for sand in building materials - GGBFS can be used as a replacement for portland cement
The Slag conditioner offered by us helps in adjusting Slag composition in a way that it interacts in a balanced way with steel, thus helping in maintaining proper equilibrium. Further, it also helps in absorbing inclusions as well as impurities and assists in producing a cleaner as well as better quality steel. Further, the use of the material also helps in lowering melting temperature of slag as well as increasing its fluidity, thus helping in maintaining proper as well as desired slag composition. We also have extensive industry experience in successfully matching up with the demands of Slag Conditioner Material. It features pure constitution and assists in ensuring that there is no harmful reversion of P, S, and unwanted oxides in the Steel making process.
Blast Furnace Slag
