Slag Remover is a neutral substance that will swell or melt under the action of high temperature. After expansion, it will form hollow air holes with low specific gravity and has a certain degree of adhesion after melting, which is mainly determine the processing technology. The main components are SiO2, Al2O3, and a small amount of other alkaline oxides. Uses: Slag remover is widely used in Iron and Steel smelting casting because it is melted under high-temperature operation more than 1200 C, and has adhesiveness, so it can be effectively aggregated and adsorb slag and slag on the surface of the metal. Specifications of Slag Remover agent: 18-30 mesh, 20-40 Mesh, 50-80 mesh, etc. Product Feature: No Splash, Safe and reliable Packaging: 25kg/bag, 50kg/bag, 1000kg/bag. Lead Time: 10-15 days after receiving the customer's prepayment and original LC. Please contact us for inquiry.
Name Slag Remover Place of Origin Xinyang, Henan, China Expanded or not Unexpanded HS Code 3824999990 Brand Name Daye Model R-2, R-3, R-4, R-5 Appearance Short grained, light yellow or grey white Grain Size(mm) 2.36-0.85 (8-18 mesh) Chemical SiO2 72.30% Composition A12O3 12.35% MgO 0.60% Fe2O3 1.10% Expansion Coefficient â?¥16 Expansion Temperature(°C) 880-1050 Mohs scale of hardness(g/ml) 5.5 Loss of Ignition 4.1 Bulk density(g/ml) 0.95-1.15 PH 7 Moisture â?¤0.5% Application Steel & Iron casting, stainless steel casting, grey iron, ductile iron, molten metal purification Our advantages: 1. High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2.Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3. Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Our advantages: 1. High purity - Control the consistency of raw material from themine resource. - Introduce automatic whole-process equipment to ensure product consistency. -Not allowed anyharmful impurities during raw material&production process. 2.Fine classification - Choose different raw materials according to their characteristics. -Variousproduct category, to providecustomizedslag treatment scheme 3. Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.
Our advantages: 1. High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2.Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3. Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Our advantages: 1. High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2.Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3. Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2), Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3), Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4), Mechanism of slag removing - Low softening point high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Our advantages: 1. High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2.Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3. Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Our advantages: 1. High purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. - not allowed any harmful impurities during raw material & production process. 2.Fine classification - choose different raw materials according to their characteristics. - various product category, to provide customized slag treatment scheme 3. Environment friendly & health - the reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - the physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4).Mechanism of slag removing - low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which Sticks to the scum in the metal, to make slag collected and removed.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2), Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3), Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4), Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2), Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3), Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4), Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
Product Description Henan Daye Metallurgy Casting Material Co., Ltd. is a professional manufacturer engaged in the research, development, production, sale and service of slag remover, carbon additive, riser insulation agent, and perlite series products. As a industry frontrunner specializing in metallurgical slag remover production in China, our product â??Daye Brandâ?�R-2, R-3, R-4 & R-5 can replace similar imported products completely. Product Name Perlite casting slag sand for foundry Material Mineral Color Canary yellow Standard GB/T 19001-2008 idt ISO 9001: 2008 Grade Daye R-2 Brade Rock Granularity 8-18 mesh Used Metallurgical Casting Products Show The product slag remover has occupied almost 60% market in China, which are selling well in all cities and provinces around China, and have ever been exported to the USA, Australia, Indonesia, Vietnam and South Korea. The good performance of slag removing and metal purification is highly recognized and praised by different customers at home and abroad Packing & Delivery Packaging & Delivery Packaging Details 1) Net weight 25kg per unit (plastic woven bag) 2) As customer's request. Delivery Time 10-20 days according to the quantity Our Certifications FAQ Q: Are you trading company or manufacturer ? A: We are factory. Q: How long is your delivery time? A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity. Q: Do you provide samples ? is it free or extra ? A: Yes, we could offer the sample for free charge but do not pay the cost of freight. Q: What is your terms of payment ? A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
1. Slag accretion fast, avoid of immersing other sundries into solution . 2. The composition of metal resolution and mechanical capacity of foundry will be not changed after using our slag remover. 3. Easy to restore compared with the traditional slag remover, not be influenced by the season change, also do not worry about causing fire. 4. Less dosage, just account for 0.05% - 0.1% of the total solution. 5. Specialized in the refined process, stability quality, excellent capacity.
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. 2), Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme 3), Environment friendly & health - The reaction process is only a change of physical state, not chemical reaction, so no solution to the molten metal. - The physical reaction is stable and non-toxic and tasteless. It does not produce soot & not affect human health. 4), Mechanism of slag removing - Low softening point, high viscosity. After being scattered into the metal surface, the product will expand and - Spread out to cover the entire surface, melt rapidly, form a high-viscosity "film" finally, which sticks to the scum in the metal, to make slag collected and removed.
ggbfs or steel slag
Product Properties 1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost.
Our advantages: 1, High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. - Not allowed any harmful impurities during raw material & production process. Boiler slag removal agent for steel iron castingBoiler slag removal agent for steel iron casting 2, Fine classification - Choose different raw materials according to their characteristics. - Various product category, to provide customized slag treatment scheme Usage: 1, Scatter a small amount of slag remover in molten metal surface at first; 2, Scatter a thin layer of slag remover to cover the surface, after fully reaction, pick out the slag before casting out; 3, Scatter some slag remover to the molten metal in ladle, pick up the slag, and repeat once again; 4, Addition amount should be about 0.05% - 0.1% by weight of the metal.
We are supplier and exporter of Copper Slag. Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
