We are A trading company with mostly import and exports, and can supply you with the above mentioned products. Origin would be from USA, China or Philippines were we have branches. Best offer per piece is $45-700 per Ton, we offer bulk container shipment, with prices CIF.
Mold making silicone datasheet Silicone rubber (hy-638) for mold making Model Appearance Viscosity (cs) Hardness (ao) Tensile strength (kgf/c) Tear strength (kgf/) Elongation (%) Mixing ratio(%) Operating time(h) Curing time(h) 638 White 14000~16000 25~28 í²35 í²25 í²500 2~3 0.5 2~4 Silicone rubber (hy-728) for mold making Model Appearance Viscosity (cs) Hardness (a0) Tensile strength (kgf/c) Tear strength (kgf/) Elongation (%) Mixing ratio (%) Operating time(h) Curing time(h) 728 White 15000~17000 26~28 í²35 í²22 í²470 2~3 0.5 Silicone rubber (hy-788) for mold making Model Appearance Viscosity (cs) Hardness (a0) Tensile strength (kgf/c) Tear strength (kgf/) Elongation (%) Mixing ratio(%) Operating time(h) Curing time(h) 788 White 15000~17000 28~30 í²35 í²20 í²470 2~3 0.5 2~4 25kg/drum, 200kg/drum.
RTV-2 mould making silicon rubber applications RTV-2 mould making silicon rubber is intended for poly resin crafts, PU resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candles crafts, plastic toy, statuonery gifts crafts industry, a large statue Buddha, relievo furniture, funiture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mould, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. RTV-2 mould making silicon rubber features RTV-2 mould making silicon rubber is flowing liquid with general hardness of 22-50 Aíp after curing. Mould making silicon rubber is a kind elastic silicon rubber mould which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Our curing agent is free charged. 25kg/drum, 200kg/drum
1.RTV-2 molding silicone rubber advantage: with good fluidity, fast curing speed, high tearing strength elongation, high tear strength. 2.RTV-2 molding silicone rubber application : RTV-2 molding silicone rubber mainly applicable to make the silicone mould for cultural relic duplication,architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc. 3.RTV-2 molding silicone rubber features : RTV-2 molding silicone rubber, silicon rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion. 4.RTV-2 silicone rubber instruction: RTV-2 molding silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts.
Silicone rubber products
Brief Introduction Silicone rubber for molding is a kind of liquid fluid, features good fluidity and good operation, many duplication times. Applications of mould making silicone rubber Silicon rubber for molding making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Features of mould making silicone rubber Silicon rubber for mold making is white or red flowing liquid with general hardness of 22-50shore A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Product Specification 620# 630# 638# FAQ of mould making silicone rubber Why should the silicone mold be reused only for a few times? It can be due to the following reasons: a. Adding too much silicone oil in to silicon rubber. b. Using the silicon rubber with a high hardness to make molds for small sized products with delicate and intricate designs. For getting further information about our silicone rubber, Please feel free to contact with Miss Shameya. She can speak good Arabic and English and Chinese for an easier communication with you. 200kg/drum, 25kg/drum
Silicone rubber for mold making Silicone rubber for mold making applications Silicone rubber for mold making is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicone rubber for mold making description Silicone rubber for mold making is white or red flowing liquid with general hardness of 22-50A after curing. Molding silicon rubber is a kind elastic silicon rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion as well as high reproduction times, good tensile strength, tear strength and elongation. Frequently asked questions of silicone rubber for mold making Why does the silicone rubber mold have few molding times? The silicone rubber mold has few molding times is due to following reasons: adding too much silicone oil which will destroy the molecular of silicone rubber; making the mold for small and fine detailed products with higher hardness silicone rubber which is easy to break; making the mold for large products with soft silicone rubber which will reduce the tensile and tear strength of the mold, and the mold will have deformation. Thus, we should take the proper silicone rubber to make the mold for suitable products. Place of Origin Guangdong China Brand Name Hong Ye Silicone Rubber Model Number HY625 HY630 silicone rubber Minimum Order Quantity: 200 Kilogram Price: FOB shenzhen USD 5.8~7.5/kg Packaging Details: 25kg/drum and 200kg/drum Delivery Time: within 3 days after payment confirmed in our bank. Payment Terms: L/C,T/T Supply Ability: 8 Ton per Day Certifications:RoHS.MSDS.SGS ISO9001:2000 25kg/drum and 200kg/drum
Mould making silicon rubber Applications of mould making silicon rubber Silicon rubber for mould making is mainly used for poly resin crafts, gypsum crafts, unsaturated resin crafts, lighting and candle crafts, plastic toys, stationary gifts crafts industry, a large statue Buddha, large-scale cement mold, aninamls and plants sculpture, relievo furniture, cultural relic product, etc. Features of molding silicon rubber: Silicon rubber for mold making with general hardness of 22-55 A0 after curing. Molding silicon rubber is a kind of flowing liquid which features with good resistance to deformation, good tensile and tear strength, acid-alkali as well as high reproduction times, good flowability and easy operation. Payment Terms:L/C, T/T Port: Shenzhen Minimum order quantity:200kg Supply ability:8 tons/day Deliverly Time:within 3 days after getting your payment Package:25kg/drum and 200kg/drum.
1.RTV-2 molding silicone rubber advantage: with good fluidity, fast curing speed, high tearing strength elongation, high tear strength. 2.RTV-2 molding silicone rubber application : RTV-2 molding silicone rubber mainly applicable to make the silicone mould for cultural relic duplication,architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc. 3.RTV-2 molding silicone rubber features : RTV-2 molding silicone rubber, silicon rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion. 4.RTV-2 silicone rubber instruction: RTV-2 molding silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts. Minimum order quantity: 100KG. Trade terms: FOB SHENZHEN. Packing: 25kg/drum and 200kg/drum. Payment terms: T/T or L/C at sight. Origin place:guangdong. Delivery time: within 3 days after payment confirmed in our bank. Supply ability: 4 tons per day.
Mould making silicone rubber advantage: With good fluidity, fast curing speed, high tearing strength elongation, high tear strength. Mould making silicone rubber application: Mouuld making silicone rubber mainly applicable to make the silicone mould for cultural relic duplication, architectural decoration, resin crafts, lighting ornaments, candles, statues, model design, product exploitation, etc. Mould making silicone rubber features : Mould making silicone rubber, silicon rubber are generally named two -component room temperature vulcanization silicone rubber, a kind elastic silicone rubber mold which features with resistance to deformation, high-temperature, acid-alkali and expansion. Mould making silicone rubber instruction: Mould making silicone rubber are generally named as two-part room temperature sulfurated silicone rubber, which features an exceptional fluidity and good operability. When mixed with 2-3% curing agent, they can still be operated within 30 minutes, but will be formed after 2-3 hours. With resistance to deformation, high temperature, acid and alkali, and expansion, silicon flexible molds are used for mold duplication and delicate mold making for poli crafts, resin crafts lighting and candle crafts. 25kg/drum and 200kg/drum
RTV liquid moulding silicone rubber has the following features a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring b. resistance to deformation, high-temperature 220 degree centigrade c. acid, alkali and ageing-resistance d. low shrinkage< 0.2% e. good tensile strength 362 (kgf/cm) f. high reproduction times Operation tips of rtv liquid moulding silicone rubber a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur. b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber. Plus: We have free CD on how to operate for our customers enclosed with product package. 25kg/drum and 200kg/drum
1. Application of rtv liquid moulding silicone rubber : liquid molding casting silicone rubber is mainly applied for making various molds,such as reproduction of poly resin, epoxy, polyurethane-polymer, plaster, gypsum casting and moulding, soaps, candle & lighting, architecture, decorative arts and crafts, plastic toy, gift and stationery, big statue, cultural relic product, etc. 2.Features of rtv liquid moulding silicone rubber a. low viscosity, exceptional fluidity and easy operation:21000 cps suitable for pouring b. resistance to deformation, high-temperature 220 degree centigrade c. acid, alkali and aging-resistance d. low shrinkage< 0.2% e. good tensile strength 36 2 (kgf/cm) f. high reproduction times 3. Operation tips of rtv liquid moulding silicone rubber a. adding too much silicone oil will destroy the molecular of silicone rubber, which will cause a decrease of the tensile and tear strength of the mold and deformation may occur. b. remember to take the proper silicone rubber to make the mold for suitable products. for products with delicate and complicated patterns, you are expected to use soft silicone to make molds. While for products with easy and smooth patterns, you should choose hard silicone rubber. Plus: We have free CD on how to operate for our customers enclosed with product package. 25kg/drum and 200kg/drum
Liquid silicone rubber (LSR) mould Wooden ark
Please dont hesitate to ask if you have any questions about rtv liquid moulding silicone rubber , here ms aileena is at Skype:liaoyuzhen92 25kg/drum and 200kg/drum
Addition Cure rtv-2 Liquid Silicone Rubber for Concrete & Stone moulds Artificial Stone & Concrete Casting Silicone Rubber Features: Amazing fluidity and easy to operate Platinum-based, food-grade silicone (environmental friendly, odorless -and non-toxic) Delicate design available Mixing ration: 1:1, easy to mix Easy de-molding Excellent tension and tear strength High performance in duplication Shrinkage is almost zero (below 0.1) Excellent resistance to weather, temperature, aging, acid and aging-proofing. High resistance to high temperature and aging(resist -60â?? to 250â??) Appearance: Part A:a non-toxic and odorless liquid with translucent color and platinum inside. Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Technical Data Characteristics of the non cured product Properties G-820 G-825 G-830 G-835 G-840 A B A B A B A B A B Appearance low viscous liquid Colour translucent Density [g/cm 3 ] at 23 �°C, approx 1.10 1.10 1.10 1.10 1.10 Viscosity [mPa�·s] at 23 �°C, approx 5000�±1000 6000�±1000 7000�±1000 8000�±1000 9000�±1000 Polymerisation Curing conditions: 1h at 80 �°C Properties G-820 G-825 G-830 G-835 G-840 Hardness Shore A 20�±2 25�±2 30�±2 35�±2 40�±2 Tensile strength [N/mm 2 ] 45�±10 50�±10 55�±10 55�±10 60�±10 Elongation [%] 500�±50 500�±50 450�±50 450�±50 450�±50 Tear strength [N/mm] 22�±2 24�±2 26�±2 24�±2 12�±2 Application: GC RTV silicone G-8 series are great for artificial stone casting. They are widely used for architectural elements, block-outs & hole former, concrete counter tops, flexible form liners, GFRC, manufactured stone veneer, ornamental precast & statuary, stamped & textured concrete, etc. Operation Method: Both pouring and brushing operation methods for our artificial stone casting silicone are available. You can choose the best one as your preference, we can provide thixotropic agent for brushing. Notice What is the hardness should I choose? Normally 20~40 Shore A will be the best, but it also should according to your size and pattern design. Warm Tips: The surfaces with which the material comes in contact must be perfectly clean, free of grease and dry. Close the bottles after use so as not to confuse the cap of the catalyst with that of the base when re-sealing. Be aware of possible cross-contamination; it's highly recommended to use only dedicated gear when processing poly-addition RTV2 silicone rubber (including degassing devices). Be aware that contact with certain material can inhibit the curing of the RTV2 poly-addition silicone rubber. Common contaminants to be avoided include: -Natural or synthetic rubber, vulcanized with sulphur derivatives. -Poly-condensation RTV catalyzed with metallic salts. -PVC stabilizing agents. -Amine cured epoxies. -Sulphur, tin and amines derivatives. -In case of doubt, carry out a small test by pouring the mixture onto a small area of the object.
Liquid Molding silicone rubber/(RTV) silicone rubber application liquid molding silicone rubber is suitable for industries such as toys, gifts, furniture decoration, construction decoration, stationery, resin crafts, unsaturated resin crafts, poly resin crafts, candle crafts, plastic crafts, plastercrafts, artificial plant and animal crafts, Buddhist statue crafts. Liquid molding silicone rubber/ (RTV) silicone rubber description Tin-based silicones, also called condensation-cure silicones, are two-component materials which cure at room temperature(RTV)to flexible, high tear-strength rubbers. Tin cured silicones can be poured onto models or they can be made brushable by adding a thixotropic additive. They are ideal for molds where easy release or high temperature resistance is required. Tin cured silicones can be used for casting polyurethane, epoxy and polyester resins, waxes, all gypsum products and low-temperature metals. Our tin-cured silicone systems are the most economical. They are best used for casting resins and low melt metals.
Molding silicone rubber is primarily intended for poly resin crafts, PU crafts, PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory, Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 25kg/tub.
Manual mold silicone rubber features description The manual mold design silicon rubber features with the resistance to deformation, good tensile strength as well as low shrinkage, and time of reproduction determined on the basis of customers. To handle this situation depends on different cases. Under the condition of an available vacuum pumping machine, mix the silicon rubber and curing agent evenly and then take it to vacuum chamber to the air. If without a vacuum pumping machine, reduce the amount of the curing agent properly. 25kg/tub.
Product Content Description: OEM LSR mould making/LSR tool making 1. Purpose: for medical use 2. Be suitable for: LSR machine and LSR mateiral 3. Mould working theory: two components LSR material A and B, mixed in the dynamic and static mixer as the proportion of 1:1:, then the mixed material go to injection barrel, then to injection nozzle, then to hot LSR mould (the mould temperature is between 90 degree to 180 degree), in the mould the mixed LSR material is cured and solidified to solid silicone parts. Product Name: liquid silicone negative pressure balloon mould Material: S136 for mould core, HRC48-52, #50 steel for mould base or based on clients' requests. Model : 100ml, 200ml, 400ml Cavities: 1, 2 and 4 cavities Mould structure: cold runner which can save lots of material Suggest Machine: 130T or 150T LSR injection molding machine Mould life : 50 0000 - 100 0000 shots Mould delivery time: 35 working days
Features of OTT Low Price Moulding Liquid Silicone Rubber: An exceptional fluidity and good operability, easy to demold Good tensile strength and tear strength Soft hardness Copy detailed pattern Good flexibility Eco-friendly Long shelf-time &lifetime Applications of OTT Low Price Moulding Liquid Silicone Rubber: OTT Low Price Moulding Liquid Silicone Rubber could be mainly used for PU/poly resin products, unsaturated resin products, plaster products, fiberglass products, gypsums crafts, cement statues, etc.
