Silicon slag is a grayblack granular solid waste produced by partial oxidation and partial reduction of silicon materials at high temperatures Silicon slag mainly comes from silicon material processing processes in the metallurgy and semiconductor industries such as silicon wafer slicing ferrosilicon smelting and other processes The main components of silicon slag are SiO2 and a small amount of FeO Al2O3 CaO and other elements and oxides
1 Make cement
Silica slag can be used as an additive in cement clinker to replace some materials such as plaster of paris or fly ash in cement clinker Silica slag can promote the hydration reaction of cement clinker and enhance the early strength and longterm performance of cement
2 Making glass
Silica slag is an important raw material for glass manufacturing It can replace part of the raw materials such as quartz sand and sodium carbonate reduce the cost of glass production and at the same time improve the quality and weathering resistance of the glass
3 Manufacturing Ceramics
After silicon slag is mixed with materials such as alumina calcium oxide and magnesium oxide highperformance refractory ceramic materials can be prepared These materials have excellent properties such as hightemperature fire resistance high strength and wear resistance and are widely used in hightemperature furnaces chemical equipment and other fields
4 Manufacturing building materials
Silica slag can be used as a raw material for manufacturing building materials such as building bricks sound insulation panels and thermal insulation materials Building materials made of silicon slag have high strength wear resistance fire resistance and other properties and also have good heat and sound insulation properties
5 Other uses
Silicon slag can also be used to manufacture graphite electrodes iron oxide pigments electrical insulation materials and other products In addition silica slag can also be recycled such as used to make road hardeners lowcarbon cement etc
Silicon slag is a by-product of smelting metal silicon and ferrosilicon.It is a kind of scum floating on the furnace in the process of smelting silicon.It is content is from 45% to 70%,and the rest are C,S,P,Al,Fe,Ca. It is much cheaper than purity silicon metal.Instead of ferrosilicon for steelmaking, can reduce the cost.
Silicon slag 50 is Si greater than or equal to 50, Ca less than 5, S less than O0.1, P less than 0.05, C less than 5.
Silicon Slag Silicon Metal Slagis a byproduct from the manufacture of silicon metal it is a kind of mixture which contains the main content Silicon 3565 and other components such as C S P Al etc
It is a good substitute for FeSi in steel making which has advantage in lowing the cost of production and reusing resource Usually we use silicon slag to produce silicon briquette which is far and wide market in domestic and internationalour silicon metal is used by the chemical industry in the production of silicon compounds and by semiconductors Aluminum manufactures to improve the useful properties of aluminum as well as in the manufacture of silicon wafers used in photovoltaic solar cells and electronic
Silicon slag 50,55,60,65%
Silicon Powder 0-5mm or as your required
Silicon Metal Slag 1-3mm or as your required
Ferro Silicon powder 1-3mm or 325 Mesh
1.Silicon slag(off grade silicon) is a by-product when making silicon metal.
2. The silicon content is from 45% to 95%, and the rest are C, S, P, Al, SiO2, Fe, Ca etc.
3. The silicon slag is much cheaper than purity silicon metal, and has many industrial applications.
Function:
Use as deoxidizing agent in the production of magnesium, chromium and other metals via the same mechanism.Used in the production of lower grade of Si3N4 in a cost effective manner, the material is suitable for refractory applications such as refractory bricks and other high-temperature applications.
Application:
1.Silicon content from 30~50% is used for silicon addition for iron making in the blast furnace and cupola, 50~70% is used for the deoxidization of steel making.
2. Silicon Slag can used as Silicon metal alternative.
3. We use silicon slag to produce silicon briquette which is far and wide market in domestic and international.
4. Silicon slag is a good substitute of FeSi in steel making, which has advantage in reducing the cost of production.
Packaging Details: water-proof plastic woven bag, 1000kg per bag or as your requirements.
Delivery Time: Within 20 days after receipt of prepayment.
Remark: Chemical composition and size can be optimized by the customers' requirements.
20494 Silicon Slag Suppliers
Short on time? Let Silicon Slag sellers contact you.
PHYSICAL APPEARANCE ASPECT
Agglomerate materials COLOR Gray blackish color
CHEMICAL BEHAVIOR
The basicity of the slag is normally fixed by the amount of lime and calcinated dolomite added, the silicon and aluminum levels of the hot metal and steel scrap charged as well as ferro-alloys.
Below present our general procedures for the purchase and sale of sugar of Brazilian origin:
1- Buyer issues a Letter of Intention (LOI) addressed to Seller;
2- Seller issues a Soft Corporate Offer (SCO);
3- If Buyer accepts SCO, signs and seals SCO and then sends to Seller;
4- Seller issues Full Corporate Offer (FCO);
5- Buyer signs and seals FCO and issues an Irrevocable Corporate Purchase Order (ICPO), addressed to Seller;
6- Seller issues draft of Sale and Purchase Agreement (SPA) to be discussed and commented;
7- SPA is signed by Seller and Buyer;
8- Buyer issues draft of the Payment Instrument (SBLC/DLC) for approval by Seller�´s Bank;
9- If Seller�´s Bank accepts, Buyer issues the bank guarantee (SBLC/DLC);
10- Seller issues Performance Bond (PB) 2%;
11- Seller prepares the product and export documents;
12- Buyer receives the export documents by mail;
13- Buyer makes payment 100% to Seller�´s Bank through transfer bank (Swift Message MT-103);
14- Shipping;
15- Seller sends the original export documents to Buyer;
NOTES:
The financial instrument (SBLC / DLC) must be issued by the Top 50 Bank in the world ranking.
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
- European Code: 19.12.01
- Basel Code: B1010
- HS Code: 2619.0020
- Quantity: 2000 tons currently available
- Monthly quantity: 500-1000 tons depending on production
- Size: 350 1200 mm
- Fe content: from 77 to 86%
- C content: above 2,5-3%
- Bulk density: 2,8-3,4 tons/m3
- Loading type: loose in 20 (26-27 tons on average)
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel.
Physical Description
On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm
Chemical Composition
Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%.
Packing: Loose in container
Loading: in 20 Container
For further information, please feel free to contact us.
Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry.
The level of Fe% in the slag has been estimated by water displacement test.
This material con offer competitive advantages respect other metal scraps:
Price;
Stable Chemistry;
The material can be loaded loose in 20 heavy duty container.
We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag
:
1. >85% Fe Average 600mm Max Fraction
2. >78% Fe Average 20-300mm Fraction
The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact
Copper slag is a low cost expendable abrasive suited for open blast cleaning and due to its low silica content it does not pose the health hazards created by silica sand. Its sharp, hard particles can provide a fast cleaning action and an excellent surface profile. It is available in various sizes
Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate). Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2. Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc.
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag's unique properties enhance durability, strength, and sustainability.
Copper slag is abrasive blasting grit made of granulated slag from metal smelting processes (also called iron silicate).
Copper slag abrasive is suitable for blast cleaning of steel and stone/concrete surfaces, removal of mill scale, rust, old paint, dirt etc. Suitable for SA-3, SA-2 and SA-2.
Copper slag blasting media/grit is manufactured of the granulated slag of copper refineries, and used for blast-cleaning of metal surface. In different industries it is called different names abrasive powder, grit, copper slag grit, mineral grit, grinding grains, etc. but its main use is still for surface blast-cleaning. Internationally the described media is manufactured in compliance with ISO 11126-3
Blasting the grit at the surface is the most advanced approach for metal surface cleaning before paint spraying. The blasting media manufactured from copper slag brings less harm to people and environment than sand. The product meets the most rigid health and ecological standards.
Use of Copper Slag:
Better Roads and Building Constructions with Copper Slag
Copper Slag as Cleaning and Blasting Material
- Minimizing the re - oxidation molten metals in the furnace
Packaging & Shipping:
- 50 Kg Multi Walled Paper sacks, Palatalized on wooden Pallets, Shrink-wrapped in two ton lots.
Two ton jumbo bags.
- Loose in Break Bulk or as required by the buyer
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
Blast furnace slag is a nonmetallic coproduct produced in the process. It consists primarily of silicates, aluminosilicates, and calcium-alumina-silicates. The molten slag, which absorbs much of the sulfur from the charge, comprises about 20 percent by mass of iron production. The average chemical composition of the material is the following: CaO 36.50% MgO 7.90% Al2O3 11.70% MnO 1.13 % K2O 0.43 % Na2O 0.22% FeO 1.71 % SiO2 38.73% TiO2 0.69% S 0.86% We have available two different lots of slag GRANULATED BLAST FURNACE SLAG The granulated blast-furnace slag is sand-type slag manufactured by spraying high-pressure water jets on a blast-furnace molten slag.
Origin :- Vietnam . India
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
20494 Silicon Slag Suppliers
Short on time? Let Silicon Slag sellers contact you.
