SiC heating element Silicon Carbide (SiC) heating element is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance
Silicon carbide(SIC)heating elements, molybdenum disilicide(MOSI2)heating elements,
Silicon carbide (SiC) electric heating elements for element temperatures up to 1625 available in a wide variety of standard sizes and geometries, or in customized designs to meet the specific needs of various processes and equipment. SiC heating elements are capable of high power output, and may be mounted either vertically or horizontally. Because the element material remains rigid even at the maximum operating temperatures, no special supports are required, which simplifies the design of the equipment. FOAM +WOODEN CASE
Silicon carbide sic electric heater rod for element temperatures up to 1625, for industrial and lab furnaces/ovens, available in a wide variety of standard sizes and geometries, or in customized designs.
Sic heating elements can up to 1600Cï¼?have high applied temperature,anti-oxidization,long usage life characters etc,easy installation and convenient maintenance.
The best process for heating elements Top quality silicon carbide heating elements The shape depend customized shape The advantages of rs silicon carbide heating elements: Longer working time Using high quality silicon carbide as the main raw materials by 2400 degrees celsius above high temperature vacuum sintering Has the advantages of high density, aging resistance, thermal shock resistance etc. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, semiconductor, science & research and so on. Iso9001:1400 quality system authentication Order sample: od=20mm hz=300, cz=300mm, ol=600mm. Resistance: 2.2ohms Please specify as: dia20*le300*lu300*2.2ohms When you inquiry, please inform us 1. Outer diameter (od) 2. Length of hot zone (hz) 3. Length of overall (ol) 4. Resistance (at 1050c +/-50c)
SCR Type SiC Heating Elements Product Description SCR(SGR, SEU) type double-spiral silicon carbide heating elements are cut so as to place both electrical terminations on the same end of the element.They are supplied with the terminal assembly attached. SGR (SCR) type Torch Furnace silicon carbide design or dimensions preclude wiring from both sides of the furnace. This type is ideal for blind holes and the operating temperature can be up to 1500 deg C. it is also widely used in various high temperature electric furnaces and other electric heating debices, such as in the industrial of magnet, ceramics, powder metallurgy, glass, metallurgy and michinery etc. Features: 1, High temperature resistance, resistance to oxidation and corrosion 2, Fast heating, long life, small deformation at high temperature, easy to install and maintain 3, With automatic electronic control systems, precision constant temperature can be obtained, curve temperature control can be obtained too according to the needs of production
W Type SiC Heating Elements Silicon Carbide Heater Advantages 1. Withstands as high as 1500�°C (surface temperature). 2. Various shapes, like Rod shape, U shape, W shape, Single Spiral & Double Spiral shape, are available to meet your demand. 3. Large size range. 4. Generates high heat output per unit surface area.
DB ( Dumbbell ) Type Silicon Carbide Heating Element Silicon carbide (SiC) Heating Element is a kind of non-metal rod or tube shape high temperature electric heating element.It is made of selected super purity green hexagonal silicon carbide as main material, which is made into blank and silicon crystal under high temperature of 2400�ºC. In oxidizing atmosphere, its service temperature can reach 1450�°C and continuous use life can reach 2000 hours. The Dumbbell style elements, with the enlarged cold ends, were one of the earliest designs of the heating elements, which were originally made oversized to increase the cold end cross section, lowering electrical resistance so as to lower the operating temperature of the cold ends. Modern Dumbbell elements, by contrast, all employ an advanced technology to keep the terminal ends cool by virtue of the decreased resistivity of the lower resistance of the material of the cold ends in the manufacturing process. Therefore, oversized cold ends are no longer necessary. Non-dumbbell or ED type elements can substituted for Dumbbell elements.
SG type SiC Heating Elements SiC heating element is a kind of non-metal rod or tube shape high temperature electric heating element. It is made of selected super purity green hexagonal silicon carbide as main material, which is made into blank and silicon crystal under high temperature of 2400�ºC. In oxidizing atmosphere, its service temperature can reach 1450�°C and continuous use life can reach 2000 hours. Technical Index of Silicon Carbide SiC Heating Elements Specific gravity 2.6~2.8g/cm�³ bend strength >300kg hardness >9 MOHâ?²S Tensile strength >150kg/cm ³ porosity rate
Silicon Carbide Heating ElementDescription Silicon Carbide Heating Element can be installed and replaced while the tin bath is operation. The heaters can be installed through the side-seal, or through the side of the bath roof, and are commonly used to extend campaign lives, where conventional elements in the side zones have been broken, and insufficient power is available. Silicon Carbide Heating Element Advantages High purity raw materials; High structural density; Slow aging; Maximum temperature being up to 1500â?? (2732�°F); Easy to be installed and replaced. Types and Applications of Silicon Carbide Heating Element 1. SW (Standard) SW Silicon Carbides are used in applications ranging in temperature from 600�°C up to 1400�°C in both air and controlled atmospheres. Although the type of atmosphere used will determine the maximum recommended element temperature. This kind of silicon carbide elements can be mounted either vertically or horizontally. 2. U-TYPE U shape Silicon Carbide is consists of two silicon carbide rod with same diameter. Each rod has both hot zone and cold end with identical resistance. Two rods are connected by the low resistance SiC. Also the connector could be used as holder according to different requirements. 3. W-TYPE 3-phase elements are available in 2 different types: SGC (Dumbbell), SGD(Standard). These elements are self-bonded silicon carbide formed by re-crystallization of silicon carbide at high temperature. It consists of three high-purity silicon carbide rods connected at one end by a silicon carbide crossbar. SGC elements are designed for vertical installation in standard float glass bathes and SGD elements for horizontal installation. They can be connected directly on three-phase power supply and is a one-side terminal type which permits drawing out the terminals from the roof of the furnace. 4. Single Spiral Silicon Carbide and Double Spiral Silicon Carbide: They are made from silicon Carbide powder, and have two shapes: single and double sprial silicon carbide heating element. They are widely used in all kinds of kilns and furnaces.
General Description Production Process: made into blank, silicided under high temperature and re-crystallized. Character: high-applied temperature, anti-oxidization, anti-corrosion, long service life, little deformation, easy installation and maintenance. Usage: used in various high temperature electric furnaces and other electric heating devices, such as in the industries of magnet, ceramics, metallurgy, glass, and machinery. Physical properties of element Specific Gravity 2.6~2.8g/cm³ bend strength >300kg Hardness >9 MOHâ?²S Tensile strength >150kg/cm�³ Porosity rate
Whatâ??s the Silicon Carbide(Sic) heating element? The SiC electrothermal element is a rod-shaped non-metallic thermoelectric element which is made of high quality green SiC as the main raw material through processing, high temperature silicification and recrystallization. Compared with metallic electric heating elements, this element has the characteristics of high operating temperature, oxidation resistance, corrosion resistance, long service life, small deformation, convenient installation and maintenance.
Our company can provide "m" type, "u" type, "h" and straight-type silicon carbide rod type, you can buy various types of furnaces according to the actual situation, different specifications of silicon carbide, if there are special needs, It can be resolved through consultation.research, etc. Silicon-carbon rods have the characteristics of high temperature resistance, oxidation resistance, corrosion resistance, fast heating, long service life, small high temperature deformation, convenient installation and maintenance, and good chemical stability. Matched with the automatic electric control system, the accurate constant temperature can be obtained, and the temperature can be adjusted automatically according to the curve according to the needs of the production process. Heating with silicon-carbon rods is not only convenient, but also safe and reliable. It has been widely used in high temperature fields such as electronics, magnetic materials, powder metallurgy, ceramics, glass, semiconductors, analytical testing, scientific research and so on. it has become the electric heating element of tunnel kiln, roller kiln, glass furnace, vacuum furnace, muffle furnace, smelting furnace and all kinds of heating equipment.
Silicon carbide heating elements Jinyu silca sic heating element is a type of non-metal high temperature heating device. These sic productsare made from fine quality green silicon carbide as its main raw material. The raw material is made first in to a blank, followed by high temperature silication and recrystallization, and becomes high quality stick shaped sic electric heating devices. Compared with metal electric heating material, this type of non-metal elements is featured of high operation temperature, anti-oxidization, long service life, little deformation, easy installation and maintenance. Because of these advantages, sic electric heating elements is widely used in various industries that require high temperature electric furnaces and heating devices. These typical applications include electronics, magnetic materials, powder metallurgy, ceramics, glass, metallurgy and machinery. We adopt new production process of cold end, so jinyu silca heating elements have excellent specific rate of heat zone resistance and cold end resistance, saving energy, long life, avoiding over-temperature of cold ends damaging furnace body. 5
SiC heater Wooden box
SIC heating elements.
SiC heating elements, MoSi2 heating elements.
Mosi2 heating elements, SIC heating elements, butyl stoppers.Manufacturer
SiC heating elements, MOSI2 heating elements, Furnace heater elements.
