Shore Hardness Tester As 120 Series Suppliers and Manufacturers

FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47

Sonokeling wood itself is a type of hardwood. The weight of rosewood wood is in the range of 0.77 to 0.86. Where from that weight there is approximately 15 percent water content. When viewed from the texture, sonokeling wood has a fairly smooth shape Table of Contents What is Sonokeling Wood Sonokeling Wood Characteristics 1. Black Color 2. Hard Texture 3. Sapwood Can Be Used 4. Anti Termite and Mushroom Attack 5. Berta Resembling Metal Benefits of Sonokeling Wood Examples of Objects from Sonokeling Wood 1. Furniture 2. Musical Instruments 3. Accessories 4. Tableware Book Recommendations 1. Unique Lamp Creations from Unused Materials 2. 3D Room Drawing Series: 22 Multifunctional Furniture Designs 3. Various Inspirations for Simple Minimalist Furniture Arrangements 4. Designing and Assembling Wooden Furniture: Etb

Color.................................Qualified Odor....................................Qualified Impurity..............................Qualified Appearance...........................White powder PH.......................................10.8 Moisture.................................10.3% Ash......................................2.33% Fineness....................................200 mesh 99.8% passed MgO content....................................1.41% Spots.......................................0.5/cm2 As.........................................0.21mg/kg Pb............................................0.62mg/kg Stability of hot paste..........................After 120 - 30min cooling, there is no hard lump that can not be crumbled in fingers. Qualitative experiment..............................10 of suspending liquid is changed to purple or blue during the reaction of iodine

Color.................................Qualified Odor....................................Qualified Impurity..............................Qualified Appearance...........................White powder PH.......................................10.8 Moisture.................................10.3% Ash......................................2.33% Fineness....................................200 mesh 99.8% passed MgO content....................................1.41% Spots.......................................0.5/cm2 As.........................................0.21mg/kg Pb............................................0.62mg/kg Stability of hot paste..........................After 120 - 30min cooling, there is no hard lump that can not be crumbled in fingers. Qualitative experiment..............................10 of suspending liquid is changed to purple or blue during the reaction of iodine

JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572

SOLAR GLASS JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection . After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse . Size Maximum Size:1665*2200mm Minimum Size: 300*300mm Specifiction Main thickness 2-5mm Dimension tolerance �?�±1.0mm Thickness tolerance �?�±0.2mm Diagonal tolerance 0.2% Overall bow

The nonionic surfactant of nonyl phenol polyoxyethylene ether was synthesized by condensation reaction of nonylphenol and ethylene oxide under the action of catalyst. There are various kinds of hydrophilic equilibrium value (HLB value). This product has a wide application in detergent/printing/dyeing/chemical. This product has good osmotic/emulsifying/dispersing/anti-acid/anti-alkali/resistance to hard water/resistance to reduction/oxidation resistance. This series of nonylphenol polyoxyethylene ether can be widely used as W/O emulsifier or O/W emulsifier, dispersant, is the main raw material of synthetic detergent. It is widely used in industrial cleaning, textile printing and dyeing, paper making, leather chemical industry, chemical fiber oil agent, oil field additives, pesticides, emulsion polymerization and other industrial fields. Tx-10 can be used as a compound monomer of chemical fiber oil, used in the textile printing and dyeing industry as a bleaching, refining, dyeing process of the diffusion agent, leveling agent, oil field wetting agent, foaming agent, mud active treatment agent. Metal processing, machinery, chemical, pesticide, rubber and other industries as emulsifier, cleaning agent

Our All in one system 32KWH LiFePO4 Lithium Battery with AC Charger and 12-15KW 120/240V Inverter for mobile vehicle application ESS including LiFePO4 Lithium Battery with BMS, off grid pure sine wave inverter, AC/DC charger. This product is composed of high quality lithium iron phosphate core (series-parallel connection) and advanced BMS management system. It adopts master-slave mode, which is convenient for monitoring and controlling the input and output system. The charging and discharging are independent, it can control the charging current of the AC charger and solar controller according to the battery temperature, voltage and SOC to better protect the battery cells from overcharging, overheating and discharging. It has high reliability and long life, products developed for applications such as solar energy storage, industrial and commercial energy storage, household energy storage, charging piles, data room and other applications. Product advantages: All-in-one design, high integration and space saving installation Using high-performance lithium iron phosphate cells, laser welding, good cell consistency, designed service life of more than 10 years Charging and discharging are controlled separately, which is convenient and reliable to control charging and discharging. The discharge port will not be disconnected when over-charging, and the charging port will not be disconnected when over-discharging, the system has good stability Master-slave mode, passive equalization, can manage the equalization resistance, can set the equalization start voltage difference, and monitor the equalization resistance temperature, more intelligent and safe, and reduce the impact of barrel effect on system energy storage BMS adopts NXP(USA) automotive-grade high-performance chips, with strong anti-interference, good reliability and wide temperature range System parameters can be set through the host computer, such as fan start/stop temperature, charger maximum current setting, charge and discharge current correction, SOC correction, with insulation leakage detection function to prevent oil leakage and short circuit of the cell Integrate Solar charge controller or AC charger optional, BMS communication control, more safe and reliable;

SANDI 30KW DC to AC inverter with 120/240V split-phase off grid inverter with CSA/UL1741 Our SDP series Off Grid Pure sine wave inverter is one of the most advanced DC to AC conversion products in the world, it is suitable use for areas without electricity, vehicles, ships, solar energy, wind turbine and other renewable energy systems and etc, can supply power and provide guarantee effectively for the areas with traffic inconveniences, in the mountains, pastoral, border, island and other areas without electricity. It has the main advantages of high quality sine wave AC output, microcomputer control, humanness design, and it is high efficiency and low no-load loss, and no pollution. The inverter can also supply AC power to all kinds of electric equipment, air conditioners, motors, refrigerators, lights, TV, electric fans and other industrial power supply. Technical Features: 1. Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable. Itâ??s service life can up to 15 years or more. 2. Intelligentized, modularized, simple structure design with powerful function. 3. Two kinds of start mode: Step-down Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 4. The output frequency can be setting via LCD panel, itâ??s very convenient for customer. 5. The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6. The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7. Pure sine wave output. With good dynamic response less than 50MS, waveform distortion rate smaller, higher conversion efficiency and stable output voltage. 8. Low Frequency Transformer, which ensures that inverter has high efficiency. 9. High conversion efficiency, Max. Efficiencyâ?¥94%,if 48VDC input, the efficiency can more than 85%. 10. Adopts black pure aluminum radiator, which confirms the best radiating performance. 11. Powerful data display function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display. 12. Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 150-400V or 300-600V or 400-800V. 13. Wide input voltage can work without battery and solar charge controller, save more cost and With MPPT wide voltage input function, maximum use of solar power.

Finger fixing splint (tubular type) AJY-S01 Tubular finger fixation for phalangeal fractures, knuckle dislocations, ligaments, tendon injuries and fixation. 190*120*3.2mm LOW TEMPERATURE THERMOPLASTIC SHEET Product features: Low temperature thermoplastic sheet is a new type of material made of specially synthesized polymer polycaprolactone treated by a series of chemical methods. Molecules are in a stable state at room temperature (10-30C), and can be softened after being heated in 65-70C water for 1-3 minutes. Curing in 3-5 minutes at room temperature. It has the advantages of light weight, high strength, good air permeability, not afraid of water, non-toxic, odorless, non-irritating to the skin, etc., and has biodegradability. Scope of application: 1. Fixation after reduction of fractures and joint dislocations 2. Postoperative fixation of soft tissue injuries such as joint ligaments, nerve and tendon injuries 3. Bone, joint tuberculosis, acute and chronic osteomyelitis, septic arthritis, primary bone Fixation during conservative treatment such as tumor metastasis or after debridement 4. Joint deformity, nerve palsy, cerebral palsy, scoliosis correction and postoperative fixation in children and fixed 5. Fixation after burns and other plastic surgery operations 6. Production and application of rehabilitation braces and orthoses 7. Posture placement and fixation during radiotherapy

We have available 100% Viscose Lenzing Fibre A Grade Stock lot Denier 1.53 , Dtex 1.70 Length : 40 mm Lustre Dull Year of Manufacturing Dec 2023 Quantity : 130,858 Kgs Origin : Indonesia

We have available 100% Viscose Lenzing Fibre A Grade Stock lot Denier 1.53 , Dtex 1.70 Length : 40 mm Lustre Dull Year of Manufacturing Dec 2023 Quantity : 130,858 Kgs Origin : Indonesia

Brass with Silver Plated adorned with American Diamond Earrings & Pearl Brass with Silver Plated Style: Drop American Diamond Color :Black