65279,65279 can be soldered without removal of coating, and easy to be dyed. Small dielectric loss under high frequency apparatus and good pinhole test performance. Apply to replays, micro-motors, transformers, instrumentation and various kinds of electric components and with for coils. Products have the approval of Ul ( file no.E227047), rohs, ISO9001:2008, ISO14001:2004 and ISO/TS 16949. Wires in accordance with IEC/NEMA/JIS executive standard. General natural packing or pack by your requirement.
0.1mm Polyurethane enameled wire copper soldering wire, Polyurethane soldering jump line for phone PCB motherboard repair tool, 0.1mm copper solder soldering welding wire for phone motherboard fingerprint repair, 0.1mm repair enameled cooper welding wire reel for mobile phone computer PCB welding repair. 0.1mm Polyurethane Enameled Wire Copper Soldering Wire Reel For Phone PCB Repair Tool Applications : This kind of enameled wire can be used to make winding wire demanding light material, high electricity conductivity and good heat dispersing performance. Especially for the winding wire for transferring high frequency signal, such household appliances as degaussing coil, high frequency transformer, common transformer and small electric. Widely used in electrical tools, ballasts, automotive electronics, refrigerator and air conditioner compressor motors, television sets. Specification : Material: Copper Diameter: 0.1 mm Description : 1 roll of 0.1mm copper soldering wire. It can be used to connect jump wire for computer and mobile phone motherboard repair. Package includes : 1pcs x 0.1mm Enameled Copper Wire
Self-bonding polyurethane enameled copper wire Polyurethane enameled copper round wire with a bonding layer, class 130 Features: self-bonding by solvents or heat. Easily colored in a variety of colors. Sloderable at 380 f¦. Applicable standard: jis c 3202.7 Typical applications: speaker coils, driving motor for watch, vibrator motor, laser head and magnetic head coils, other non-frame coils. Polyurethane enameled copper round wire with a bonding layer, class 155 Features: self-bonding by solvents or heat. Easily colored in a variety of colors. Sloderable at 400 f¦. Applicable standard: jis c 3202.7 Typical applications: speaker coils, vibrator motor, other non-frame coils. Thermosetting type polyester or polyesterimide enameled copper round wire with a bonding layer, class 180 Features: excellent adhesion at high temperature through fusion an setting processer.Higher softening temperature. Applicable standard: iec 60317-37 Typical applications: high output voice coils, high output motors, electrical tools, heat-resistance motors. According to customer's specification or executive international standards.
Thermal Rating: 130 / 155 / 180 UL Recognized Class 130 Product TYPU-130 / TYA1-130. UL Recognized Class 155 Product TYPU-F155 / TYAI-U155, and 180 Product TYFU-H180. ... UEW is a film insulation composed of Polyisocy-anate & Polyol.
Polyurethane Enameled Copper Round Wire, Class 130 This wire has baked varnish insulation mainly composed of polyurethane resin over its copper round conductor. Features: Most widely used enameled wire. Solderable at 380 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW75-C. IEC60317-4. GB/T6109.4. JIS C 3202.6. Typical Applications: Relays, Small motors, Small transformers, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire, Class 130 This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Higher cut-through temperature than UEW/130. Solderable at 400 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW79-C. IEC60317-20. GB/T6109.10. JIS C 3202.6. Typical Applications: Relays, Small-motors, Small-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire, Class 180 This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Higher cut-through temperature than UEW/155. Solderable at 420 f¦. Easily colored in a variety of colors. Excellent dielectric characteristics at high frequencies. Few pin-holes. Applicable Standard: MW82-C. IEC60317-51. GB/T6109.23. JIS C 3202.6. Typical Applications: Relays, Micro-motors, Mini-transformers, Ignition coils, Water valves, Magnetic heads, Coils for telecommunication equipment. Range of Conductors' diameter: 0.016-0.55 Polyurethane Enameled Copper Round Wire for Relay This wire has baked varnish insulation mainly composed of modified polyurethane resin over its copper round conductor. Features: Excellent consistency of conductor resistance, Excellent consistency of insulating film thickness. High solt-fill. Few pin-holes. Suitable for high speed winding equipment. Applicable Standard: JIS C 3202.6. IEC60317-20. Typical Applications: Power relays, High frequency relays, Time relays, Automotive relays, Telecom relays, Sealed relays. Range of Conductors' diameter: 0.016-0.55
Polyesterimide enameled copper round wire with a bonding layer, class 180 Features: excellent adhesion at high temperature through fusion an setting processer. Higher softening temperature. Applicable standard: IEC 60317-37 Typical applications: high output voice coils, high output motors, electrical tools, heat-resistance motors.
SUPREME PEW 155 SUPREME EIW 180 SUPREME EIW 200 Origin : Indonesia
Adipic acid is a synthetic fiber, nylon 66, nylon engineering plastics, polyurethane foam, synthetic leather (PU), the main raw material of synthetic rubber and film, also can be used in medicine, pesticides, spices, such as the production of adhesives and soldering flux. Packaging & Shipping Logistics transportation methods can be divided into various ways according to the different transportation means. Different transportation ways had different features.We will consider wholelly and decide according to cargo situation,cargo type,delivery period,transportation cost. Iron drum & plastic drum packaging 1200kg/drum 850kg/drum 200kg/drum&plastic drum 180kg/drum&plastic drum 25kg/plastic drum&Cardboard bucket Plastic bag & kraft paper bag 1200kg/bag 50kg/plastic bag 25kg/plastic bag&kraft paper bag
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
Aluminum Wire Rod. Copper Rod. Enamel bobbin wire. Energy cable. Fiber optic cable. lan connection .solar cable. plumbing cable. high voltage cable.armute .led.lighting fast and high quality very suitable ...
Enamelled coil wires, which are used in many areas of the industry such as electric motors, electronics industry, transformers, are produced within the HEPP. The necessary controls are carried out at every stage of the production of enamelled coil wires produced with modern machines, and the product quality is constantly kept under control. The products can also be produced according to IEC standards or standards such as TS, DIN in line with the requests of customers. Enamelled coil wires, which can be produced in many different designs depending on the place of use and environmental conditions, are packaged appropriately and made ready for shipment.
Our enameled wire are extensively applied in transformer, motor for air-conditioner, refrigerator, ice-box, washing machine, auto motor, compressor, microwave stove, charger, ballast, relay, degaussing coil, etc.
Specifications 1.0.10~4.50mm 2.Use in winding machine/motor/transformer 3.Good heat resistance Polyesterimide enameled copper wire (eiw/qzy) 1. Thermal classification: f h class 2. Diameter: 0.1~4.50mm 3. Performance and characteristics of products: A> very good heat resistance, heat shock resistance and solvent resistance. B> good for high-speed winding due to its C> crazing in solvent with stress. 4. Main application areas: Dry transformer. Heat resistance. Generator. Electric tool motor. High speed motor and generator. Hvt for microwave oven. Used for automotive coils as relays and ignition coils, in transformers and in solenoids. Pt15 pt25 pt60
Copper wires ( 10- 42 SWG) of different gazes as per requirements. 10 kgs to 20 kgs
Polyester-imide enameled copper round wire, class 180(0.05mm-2.00mm) Polyurethane enameled copper round wire, class 130, 155, 180 (0.02mm-3.0mm) Solderable polyester-imide enameled copper round wire , class 180( 0.016mm-2.5mm) Polyester enameled copper round wire, class 155(0.02mm-2.50mm). 0.02-3.0mm.
RR Shramik winding wires are used in motor and transformer industries.RR Shramik range of copper wires provide class H+(200 �°C) thermal insulation.Internationally approved,we have stock of sizes ranging from 0.071 mm to 5.000 mm.
Enameled Copper Scrap, Pricing, Total or Minimum order Quantity , Quality and Delivery time get back to us so we can provide all those for you if interested. Regular others also have added advantages, Bulk orders as well. Enameled Copper Scrap....
